Loading…
Loading…
59,746 results • Best match
Improvement of Electrical Installation and other allied works at Division Office M-III Building Shahdara (North) Zone
Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency>85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K/6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Complete in all respect i/c connections with 1.5 sq mm FRLS; PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powders coated die cast / extruded aluminum Body (Thickness≥ 1.20 mm) 18-20 watt
Custom Bid for Services - Job work for setting up of system integration and test facility for T-LFBMS Similar Category Operation And Maintenance Of Electro-Mechanical Installations Operation And Maintenance Of Other Machines And Plants Operation and ... Of Electrical Systems/Electrical ... Systems/ Electrical Installations ... Systems/Electrical Installations
Custom Bid for Services - Job work for setting up of system integration and test facility for T-LFBMS Similar Category Operation And Maintenance Of Electro-Mechanical Installations Operation And Maintenance Of Other Machines And Plants Operation and Maintenance Of Electrical Systems/Electrical Installations
Electrification
eProcurement System Government of Jammu And Kashmir Created By: Anwar Ahmad Khan Khan Created Date/Time: 29-Dec-2025 04:30 PM Tender Title: Internal Electrical works to be carried out for Repair /renovation of family Quarter C block at DPL Doda (LSQ 01 Room Set, 24 Sets) under Account Head Minor Civil and Electrical works in Demand 51 Police Tender ID: 2025_DGPJK_297659_3
Provision for cables, cable tray and additional swith gear equipment for cath lab and CT scan centre in the Government Medical College Hospital at Tiruvallur in Tiruvallur District
Renewal by supply and run of 25mm x 6 mm aluminium Flat for the Earthing arrangement of tray for both side with proper Earth Connections.
As per DNIT
Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with 3 nos. blades,30 cm long down rod, 2 nos, canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, Service Value (CMM/W)minimum 6.85, Air delivery minimum 215 CMM,350 PRM (tolerance as per IS:374-2019),THD less than 10%, remote for speed control and all remaining accessories including safety pin, nut bolts, washers temperature rise-75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz, single phase AC supply, earthing etc. complete as required.
Supply Installation Testing and Commissioning of Earth Pits and other electrical works in the premises of MIII A Pumping Station Panjrapur
Supply, Installation, Testing & Commissioning of Earth Pits & other electrical works in the premises of M-III A Pumping Station, Panjrapur as per technical specifications and scope of work.