Loading
Loading…
Loading…
59,845 results • Best match
INSTALLATION OF NEW GLOW SIGN BOARDS AND OUT DOOR LIGHTS AND ALLIED ELECTRICAL WORKS AT UPHC (WD-46,BR-VI) WORKS UNDER KMC.
1.00 M/S S G ELECTRIC AND CO. (GSTN-19ACPFS4268P1ZZ) BID ID -7733418 174462.55 0.00 174463.00 One Lakh Seventy Four Thousand Four Hundred and Sixty Three
Electrical Installation work at proposed Digital X-Ray unit for Rajarhat RH under North 24 Parganas
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe
Electrical Installation work related to the implementation of video conferencing system at different places under Bankura Court compound in the district of Bankura under Bankura Electrical sub division-I, PWDte under Bankura Electrical Division, PWDt
Improvement and maintenance works in Community Hall, N- Block Mangolpuri in ward No.- 49 under Rohini Zone (upgraded as Ayushman Arogya Mandir) Electrical installations.
Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD 10% ,P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000 K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) 3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.).Manufactures Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineerin-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body (Thickness ≥ 1.20 mm) a) 18- 22 watt
Work of Design, fabrication, providing, fixing of Electrical control panel and lighting panel with all allied works to Sheep Goat unit at Deonar Abattoir.
Work of Design, fabrication, providing, fixing of Electrical control panel & lighting panel with all allied works to Sheep Goat unit at Deonar Abattoir.
Repairing of cable trench with cable laying work at Bhagirathi BPS.
Making cable connection by fixing above tube terminals at the end of above laying cables 3 core cables with LT panel/motor by tightening of nut bolt as required and the cable connection should be covered with PVC tape as required.