Loading
Loading…
Loading…
59,998 results • Best match
Repairing of cable trench with cable laying work at Bhagirathi BPS.
Making cable connection by fixing above tube terminals at the end of above laying cables 3 core cables with LT panel/motor by tightening of nut bolt as required and the cable connection should be covered with PVC tape as required.
Improvement and maintenance works in Community Hall, N- Block Mangolpuri in ward No.- 49 under Rohini Zone (upgraded as Ayushman Arogya Mandir) Electrical installations.
Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD 10% ,P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000 K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) 3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.).Manufactures Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineerin-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body (Thickness ≥ 1.20 mm) a) 18- 22 watt
GENERAL-Government Secretariat, Thiruvananthapuram- Electrical maintenance work in the office of Additional director(EMD) I PRD at Ground floor, South block-Electrification-General Electrical Work
eTendering System Government of Kerala Created By: Abhilash V J Created Date/Time: 10-Nov-2025 11:07 AM Tender Title: GENERAL-Government Secretariat, Thiruvananthapuram- Electrical maintenance work in the office of Additional director(EMD) I PRD at Ground floor, South block-Electrification-General Electrical Work Tender ID: 2025_PWD_817087_1
Work of Design, fabrication, providing, fixing of Electrical control panel and lighting panel with all allied works to Sheep Goat unit at Deonar Abattoir.
Work of Design, fabrication, providing, fixing of Electrical control panel & lighting panel with all allied works to Sheep Goat unit at Deonar Abattoir.
Renovation and Reconstruction of Emergency Ward at NDH (Shaktinagar Campus), Krishnanagar, Nadia.---Internal Electrical Installation Work
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F1,2b]
Supply, delivery and installation of new motor of gathering conveyor with allied electrical works at batch-mix plant under Asphaltum Department Goragacha.
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.