Electrical Works & Installation Tender Results

Dismantling, Shifting and Transporting of 625 KVA LT DG set along with diesel day tank from OLD CCR HALL to New CCR Power House including disconnection of control cabling, Power cabling, earthing, Diesel Piping etc., and Installation, Testing, Commissioning and painting of same DG set in the proposed new location including providing and laying/fixing control cabling, supply and laying/fixing of new MS Fuel piping from day tank to DG Set, DG functional checks as per OEM's Standards or E-I-C direction and pre-commissioning testing etc., complete as required.

SH-I EI work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. a) Group C

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 120 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 120 lm/Watt output Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

OD481327/2025-2026:Excavation of trenches for laying ASTM pipe/DWC pipe in soft soil and refilling with sand or good soil after laying of cable /pipe etc.

Supplying & Laying Cable for Various NMMC Toilets & Buildings in Belapur ward