Loading…
Loading…
6,227 results • Best match
11/SE(T)/LCZ/2026-27
Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting os structure complete.(only M.S channel and angle provided by the deptt)
Strengthening of Additional Infrastructure Facilities to Existing KGBV at Palakurthy (V and M) in Peddapalli District (Under NABARD RIDF XXIX)
Supply and placing of Design Mix Concrete M20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, vibrating and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.
Replacement of overaged / rusted cantilever assembly over Chakradharpur Division.
Supply of single bracket assly complete for Each conventional OHE including fabrication CKP-DIVN-ELEC/SOUTH EASTERN RLY
Complete Overhauling of 20 cusec VT Pump for Unit 2nd at LIS Goripora.
Fabrication, turning and finishing of specified Stainless Steel (AISI-410 or IS 1570) dia 43 mm and length 1.95 M) line shaft of specified dimensions with end preparation (threaded, etc.), keyway as per old sample having finished weight of 22.23Kgs upto 20.0 kg
Labour Contract for replacement of texmaco boiler side wall tube (Both sides)
Dismantling, fabrication, erection, welding and commissioning of Texmaco boiler roof tubes and relief tubes.
Procurement of 4.5KL and 12KL fire vehicle tender at Industrial area Chopanki
Supply & Fabrication of Fire Foam Tender including chassis of reputed companies such as ASHOK LEYLAND, TATA Motors Ltd., BHARAT BENZ etc complete in all respects conforming to the requirement of Minimum vehicle load as 13850 kg. on Cabin Chassis with Minimum Engine Power output as 123 HP BS VI Phase-2 (OBD-II) RDE (Real Driving Emission) Standard Compliant Engine and fabrication of Fire Foam Tender body on this chassis fitted with Mild Steel tank having capacity of 4500 litre for water and 500 litre for foam respectively. Normal and high pressure centrifugal pump CE and UL Certified capable of discharging at least 2000 LPM at 10 kg per cm2 at normal pressure and 300 LPM at 40 kg per cm2 high pressure with all other fitments equipment and accessories as per tender specification for chassis and fabrication as per enclosed technical specification complete including all taxes F O R at Bhiwadi, complete Fire Foam Tender with chassis and fabricated body including testing transporting and Insurance etc. The rate should be quoted including all applicable taxes, octroi transportation charges handling loading unloading etc. F O R at RIICO Concerned Unit Office/Industrial Area. (Ind. Area khushkhera/chopanki)