Loading
Loading…
Loading…
6,185 results • Best match
Service contract for Miscellaneous Work of Ash Slurry Pipe lines and Dry Ash Conveying Pipe lines as and when required basis, AHP-MM (Stg-II) at SgTPP, WBPDCL.
Fabrication of different bends Size from 200NB to 450NB.
Construction of link road and motorable bridge at katlay koyul under District Capex
Soil testing, Design, Fabrication, Launching and Commissioning incl. weighing of drawings 20 mtrs span single lane steel plate girder Motorable Bridge with RCC decking over Koyul Nallah at Katlay, including dewatering , construction of abutments, approach of 30 mtr length (Filling and PCC walls included for a length of 30 mtr on each side of abutment), wing wall, return wall dirt wall, approach slab of 5.0mtr, RCC cap, fixing of suitable bridge bearings, expansion joints complete job, carriages of material to the site of works as per approved drawings and design with respect to site conditions duly approved by the competent authority i.e., Design Directorate (complete Job). As per direction of Engineer In- charge.
Labour Contract for replacement of WIL Boiler flue gas duct from APH leads to chimney work
Scope of work:- 1. To remove the damaged flue gas duct plates from APH leads to chimney, S.A., fan duct, F.D. duct in WIL Boiler and lead to the scrap yard after weighment. 2. Fabrication of flue gas duct plates from APH leads to chimney, S.A. fan duct, F.D. duct new 6 mm M.S. Plate with stiffeners and erection in the dismantled area as per Asst. Engineer / Dy. Chief Engineer instructions. 3. After erection proper support to be provided and red oxide paint to be applied & leak to be checked. 4. Approximate weight for the above work is 5 M.T.
Replacement of Pan No.4 vapour line with bend ON LABOUR CONTRACT
Specifications: Replacement of vapour line with bend in Pan No.4 Size: Dia of Vapour line : 1200mm Length : 25 meters Thickness : 12 mm Bend : 1 No Scope of work: 1) Dismantle the existing damaged PanNo.4 vapour line with its bend, weighed and leading to scrap yard through our mill stores. 2) Fabrication and erection of PanNo.4 new vapour line with its bend as per the existing manner welding on both sides (2 layer). 3) The approximate quantity of work will be around 8.00 MT. 4) Hydro test is to be carried out to check the leakages. 5) Rate shuld be quoted on per MT basis only
Development of an Open-Air Party Zone with Stage, Toilet Block, Green Rooms, and Boundary Wall Opposite IMAX at Lake View Park, Hyderabad
Supply and placing of Reinforced Design Mix Concrete M 25 grade (1:1:2) corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work and as directed by Engineer-in-charge. FOR FOOTING
Engineering, Procurement and Construction of Isotopes Production Reactor (IPR) on EPC (Mode-I) basis including Civil, Electrical, Mechanical, Process, Instrumentation and Control and other auxiliary systems at BARC(V) main campus, Visakhapatnam
Engineering, Procurement, Construction, Fabrication, Erection, Pre-commissioning and Cold Commissioning of 40 MW (thermal) open pool type Isotopes Production Reactor (IPR) on EPC (Mode-I) basis including Civil, Electrical, Mechanical, Process, Instrumentation & Control and other auxiliary systems as per NIT, Scope of Work, Tender Specifications, Conceptual Drawings, Conditions of Contract, all complete as directed by Engineer-in-Charge.