Fabrication Works Tenders

M.S. STRUCTURAL WORKS IN ROOF TRUSSES WITH SQUARE/ RECTANGULAR/ TUBULAR HOLLOW SECTIONS CONFORMING TO IS: 806-1968 & IS: 1161- 1998 CNNECTED TO ONE ANOTHER WITH BRACKET, GUSSET CLEATS AS PER DESIGN, DIRECTION OF ENGINEER-IN-CHARGE COMPLETE INCLUDING CUTTING TO REQUISITE SIZE, FABRICATION WITH NECESSARY METAL ARC WELDING CONFORMING TO IS: 816- 1969 & IS: 9595 USING ELECTRODES OF APPROVED MAKE AND BRAND CONFORMING TO IS:814- 2004, HAULAGE, HOISTING AND ERECTION ALL COMPLETE. THE RATE INCLUDES THE COST OF ROLLED STEEL SECTION, CONSUMABLES SUCH AS ELECTRODES, GAS AND HIRE CHARGE OF ALL TOOLS AND PLANTS AND LABOURREQIRED FOR THE WORK INCLUDING ALL INCIDENTAL CHAGES SUCH AS ELECTRICITY CHARGES, LABOUR INSURANCE CHARGES ETC. PAYMENT TO BE MADE ON THE BASIS OF CALCULATED WEIGHT OF STRUCTURAL TUBULAR MEMEBRS AS SPECIFIED IN RELEVENT IS CODE IN FINISHED WORK. PAYMENT FOR GUSSET, BRACKET, CLEAT MAY BE MADE BY ADDING THE ACTUAL WEIGHT OF SUCH ITEMS WITH WEIGHT OF FINISHED STRUCTURAL MEMBERS. THE RATES ARE CONSIDERED FOR A HEIGHT OF ERECTION 8 M. / 2ND FLOOR LEVEL FROM THE GROUND. ADD 1.5 % EXTRA OVER THE RATE FOR EACH ADDITIONAL FLOOR OR 4M. BEYOND THE INITIAL 8 M. OR PART THEREOF.NG MADE FOR THESE ITEMS, AS PER DIRECTION OF ENGINEER IN CHARGE.ALL FLOORS.For trusses spanning up to 12.00 m

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Carriage of Materials. (A) Sorting,Counting,Stacking mark wise and head loading of structure (Approx 1.05MT) on truck at electricity fabrication unit Naini Prayagraj