Fabrication Works Tenders

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pinth Beam

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pinth Beam

Supply and placing of the M20 Design Mix using of 10 mm HBG crushed metal 0.480 cu.m, 6 mm HBG Crushed metal 0.320 cu.m, sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.50 ltrs/cu.m of CC) etc., from any source conforming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing including centering charges, shuttering charges etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, for finished item of work (APSS No. 402) .- do - for 40 mm thick precast slabs using 20 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards with necessary reinforcement, but including cost of necessary form work etc., complete as directed by the department.

M.S. STRUCTURAL WORKS IN ROOF TRUSSES WITH SQUARE/ RECTANGULAR/ TUBULAR HOLLOW SECTIONS CONFORMING TO IS: 806-1968 & IS: 1161- 1998 CNNECTED TO ONE ANOTHER WITH BRACKET, GUSSET CLEATS AS PER DESIGN, DIRECTION OF ENGINEER-IN-CHARGE COMPLETE INCLUDING CUTTING TO REQUISITE SIZE, FABRICATION WITH NECESSARY METAL ARC WELDING CONFORMING TO IS: 816- 1969 & IS: 9595 USING ELECTRODES OF APPROVED MAKE AND BRAND CONFORMING TO IS:814- 2004, HAULAGE, HOISTING AND ERECTION ALL COMPLETE. THE RATE INCLUDES THE COST OF ROLLED STEEL SECTION, CONSUMABLES SUCH AS ELECTRODES, GAS AND HIRE CHARGE OF ALL TOOLS AND PLANTS AND LABOURREQIRED FOR THE WORK INCLUDING ALL INCIDENTAL CHAGES SUCH AS ELECTRICITY CHARGES, LABOUR INSURANCE CHARGES ETC. PAYMENT TO BE MADE ON THE BASIS OF CALCULATED WEIGHT OF STRUCTURAL TUBULAR MEMEBRS AS SPECIFIED IN RELEVENT IS CODE IN FINISHED WORK. PAYMENT FOR GUSSET, BRACKET, CLEAT MAY BE MADE BY ADDING THE ACTUAL WEIGHT OF SUCH ITEMS WITH WEIGHT OF FINISHED STRUCTURAL MEMBERS. THE RATES ARE CONSIDERED FOR A HEIGHT OF ERECTION 8 M. / 2ND FLOOR LEVEL FROM THE GROUND. ADD 1.5 % EXTRA OVER THE RATE FOR EACH ADDITIONAL FLOOR OR 4M. BEYOND THE INITIAL 8 M. OR PART THEREOF.NG MADE FOR THESE ITEMS, AS PER DIRECTION OF ENGINEER IN CHARGE.ALL FLOORS.For trusses spanning up to 12.00 m

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )