Loading
Loading…
Loading…
6,167 results • Best match
Chalthan- Development of 20 ft height cover shed facility at Chalthan Goods Shedat the RL platform of (560m x 10m) with lighting facilities (Composite tender including electrical portion)
Fabrication, supply and fixing of MS Numbers clamps with MS hook made with MS rod of 12mm dia., as per site requirement for installation of ceiling fans in covershed. The clamp shall be made from 30mm x 6mm MS flat in suitable shape, properly galvanized. The firm shall check the site for exact size & shape of clamps as per platform steel structure before fabrication and supply. Total 9550.00 Item- 23 Supply, fixing, testing & commissioning of LED street light lumaires S No. Item No Description of Item Unit Qty Rate Amount
Surendranagar-Dhasa in PRCL Section - Replacement of Porta cabin by providing Duty Bunk in jurisdiction of DEN -East (31 Nos LCs). Revised 25 LCs. (Prefab PUF materials structure).
(1) SUPPLY PUF INSULATED PANNEL (CABIN Each SIZE-04 MTR X 03 MTR X 3.8 MTR with 2 MTR) (length Front Weather Shade/Protective Shade) Roof Pannal (40/75 mm). Roof Pannal shall consist of 40/75 mm thick Polyurethane Foam (PUF) with a density of 40±2 kg/m³, sandwiched between 0.5 mm thick PPGI sheets on both sides, with RAL 9002 colour finish on inner and outer side Wall Panels (60 mm): Wall panels shall consist of 60 mm thick Micro-Ribbed Continuous Line Panels insulated with Polyurethane Foam (PUF) having density 40±2 kg/m³, sandwiched between 0.5 mm thick TCT PPGI sheets on both sides with RAL 9002 colour finish. Shelter Door Supply and installation of 60 mm thick single leaf shelter door, size 2100 mm x 900 mm, made of PUF insulated panel construction, complete with all necessary door accessories such as hinges, handle, lock, door closer, rubber gasket and other fittings. Flashing Flashing shall be fabricated from 0.5 mm thick PPGI sheet and shall be provided for base U-channel, inner corners, and outer corners, complete with necessary fixing accessories M.S. Structure, Providing, fabrication, and installation of Mild Steel (M.S.) structure, finished with two coats of primer and two coats of paint, complete as required. (2) WORK INSTALLATION CHARGES: only PUF structure (excluding civil and electrical). (3) SUPPLY AND INSTALLATION: G I Prefabricated Toilet EWC toilet with 300 L bio septic tank Size 4 X 4 X 7 Feet. Including all Taxes, GST, Etc, completed. (Rate as per Quotation Placed) Total 21234011.50
Construction of New Building(Multipurpose Block, (SRC-Cum-Auditorium)(GPlus 5), Miscellaneous work of J.L.N. College, Chakradharpur under Kolhan University, Chaibasa (Part-B)
Supplying and fixing of Regular Office Table with Side Unit with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Overall Dimention: 1500x600x750 mm Ht. Top made of pre laminated MDF board with pvc edge beading. Understucture also made up of pre laminated particle board with pvc edge beading. Top- Size :- 1500x600x25 MM thk. Pre Laminated MDF Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Modesty- Modesty made up of 18 MM thk. Pre Laminated PMDF Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine. Under Structure- Side Leg made with a Combination of 25 MM thk. Pre Laminated MDF Board with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement. Cable duct made up of 0.8 mm CRCA Sheet. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of MDF board covered by 2 mm thick PVC Edge beading by Through Feed Machine. SDU with Drawer- Size: Height:750mm,Width:900mm,Depth:450mm. Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles. Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. Cap & Levellers- Flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
Electric Maintenance work related to Transformer at various Yard in RNT Medical College, Udaipur( Part 2)
Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. .
Construction of Material Recovery Facility 5 MT Capacity at Near Mattuthavani in Tiruchendur Municipality
Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc.,complete. Fully Panelled Single Leaf door 0.90 x 2.00Mt
Construction of shed for Police Security adjacent to the compound road near Super Specialty Building for security purpose at Gobindanagar campus of Bankura Sammilani Medical College and Hospital under Bankura Division PWD (Civil Work) (2ndCall)
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. i) For roof truss works a) Span up to 12 Mtr