Fabrication Works Tenders

SITC of 10 HP online starter panel consist of Incomer :- 150A MCCB3 Ph 415V -1 Nos. , Digital Volt meter - 1 No., Digital AMP Meter With CT – 1No., Digital frequency meter – 1 Nos., Phase Sequence meter – 1 Nos., LED indicating lamp – 1 Set. Aluminum Busbar etc Out going :- 32A 3 Pole MCCB for Motor -2 Nos. , Control MCB, digital Amp meter 2 Nos., with contractors, relay, 10HP Online Starter – 2 Nos., Push Button, indicating Lamp Control Wiring Power Wiring etc complete. Powder Coated Panel fabrication 14 /16 SWG CRCA SHEET MS Angle / MS channel

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of 7.5/5/3/2/1.5 TR Concealed split and cassette AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. The entire structure should be barricaded & safe for ODU maintenance. Area of the platform is 2Mtr. x 1.2Mtr.or as per Machine configuration & load with adequate service access as per direction of EIC Structural design should be approved by E.I.C.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. ISA 50X50X4 mm(IS SP-6) I) For structural members of specified sections weighing less than 22.5 Kg./m

Fabrication and supply of tubler trusses & purlins holding down bolts and bearing plate of section and size as directed by Engineer in charge including supply of all materials, labour T&P etc. required for proper completion of work