Loading
Loading…
Loading…
31,450 results • Best match
Replacement, repairing of damaged intermediate frame and deck plates, installation and erection of idler frame with rollers, return rollers, fabrication and erection of same as unit no. 301 middle portion near road side belt conveyor of ROM section a
Fabrication and erection of materials
Repairing, replacement of worn out intermediate frames and deck plates installation and erection of idler frame with rollers, return rollers, fabrication and erection of same 801-1 drive side belt conveyor of PS-9 section at Madhuban Coal Washery
Fabrication and erection ofg materials
Repairing of existing 4inch dia pipeline and maintenance of DSM-3 pump B.J.filter plant and Different types of fabrication and repairing jobs in domestic pumps and pipeline at Albion sump, Albion filter plant and B.J. filter plant, Damoda Colliery.
eProcurement System of Coal India Limited Created By: PRAWEEN KUMAR DAS Created Date/Time: 15-Sep-2025 12:00 PM Tender Title: Repairing of existing 4inch dia pipeline and maintenance of DSM-3 pump B.J.filter plant and Different types of fabrication and repairing jobs in domestic pumps and pipeline at Albion sump, Albion filter plant and B.J. filter plant, Damoda Colliery. Tender ID: 2025_BCCL_341989_1
MTPS I Mill Plant Unit II Dismantling patch welding and assembling of Mill outlet elbows orifices Transition pieces fabrication of spool piece Multiple port outlets etc Hard facing of vertical coal pipe 1mtr length after Transition piece 24 Nos
Charges for dismantling the Spool pieces, multiple port outlet bodies and transition pipes 4 Nos. each after assembling the coal pipe inspection with center feed pipe structures including transportation of supporting material from stores to site and re-fixing the Spool piece, MPO bodies and transition pieces and assembling to its original position and carrying out necessary related works. and devolution of scraps to stores etc. for a mill.(2A to 2F)
Proposal for fabrication and installation of 8 nos Jagannathpur OCP skid Mounted Portable Blasting Shelter of size 6 x 6 related to Mines workers safety as mentioned in Reg. 188 of CMR 2026 for Jagannathpur OCP of Bhatgaon Area
Fabrication of 08 nos blasting shelters of design as per the drawing enclosed with this NIT (as annexure XIV) by providing all the requisite materials and workmanship. Each blasting shelter shall be of size 6 feet length x 6 feet width x 8 feet height. Weight of each shelter shall be around 4330 Kg considering of following materials of rough weight MS Sheet 3.15 mm: 1800 Kg approx MS Channel : 1300 Kg approx MS Angle: 1200 Kg J hook, nut bolts, washers: 30Kg approx with Paints, fale ceiling, cushion seats, bulb, fans, insulation interior interior with wooden finishing etc. Channels shall be provided at the base of the shelters for structureal rigidity and pulling/drawing hooks shall be provided to enable easy shifting of the shelter by pulling. At-least 2 hooks shall be provided on the top of the shelter, so that the shelter can be lifted for transportation. The lifting hooks shall be connected to the base with structural membrances of suitable strength. Transportation of the blasting shelter to mine permises as per instruction of engineer in-charge. Supply of all the materials required for fabrication of the shelters like MS sheets, angles, square pipes, channels, plates, hooks, nut bolts, paints, welding electrodes, industrial gas etc. is in the scope of work and shall be provided by the contractor .
A Fabrication of shed along with wiring near Regional store substation under CCD, Dhori Area. B Shifting of pole and heightening of boundary wall, provision of concertina wire fencing and floor PCC of substation near Regional store substation un