Industrial Pumps Tenders

Integrated pump tubing (inflow-outflow tubing) to be used arthroscopy pump for pumping saline during arthroscopy procedures. should be compatible with shaver system in Ot or supplier has to provide machine on case to case basis.

DOMESTIC WATER TRANSFAR PUMP Supplying, installing, testing and commissioning of submersible or Mono blockelectrical driven pump 1set . (1 working and standby) domestic water pumps for pumping domestic water from U.G. sump to over head water tank, with all necessary arrangements to operate on 3HP 50 HZ, 440V AC supply fitted on a common base frame accessories to lift the pump during maintenance , necessary power connections, the supplier shall include the control panel and wiring from TPN switch to control panel and wiring upto pumps, the control panel comprising of O or L relays, single phase preventor,separate overload trip and relayset, ON or OFF or TRIP indicating lamps,start or stop push buttons, With liquid level controlers, etc., complete as complete. Duty of the Pump 4 cum per hour at 20 TO 25 m head Make : Kirloskar or suguna or texmo or CRI two set industrial type electronic automatic liquid level controllers, with stainless steel probes or sensors.

Rubber Bush for Feed Pump as per Drawing No BLR4 T

Bucket & Shallow Fill Pump (SFP) The bucket shall be madeup of a tough & durable fabric and reinforced with wear strips at strategic points for added abrasion resistance. Metal hardware shall be made of stainless steel for corrosion resistance. The fabric shall be strong, load bearing, impact resistant and resistant to high operating temperatures. It shall have good UV stabilization and strong resistance to the growth of algae and fungus. The bucket shall be compact, easy to pack and stow. It shall be easy to assemble in short time from stowed condition and retain bucket shape. The bucket shall be equipped with a discharge valve to discharge (open / close) water by electric power / pneumatic pressure. Bucket shall have provision to reduce the capacity/volume by means of limiting strap or any other method proposed by the vendor.This volume limiting provision shall allow the following capacities: i. 85% of bucket full volume ii. 70% of bucket full volume Bucket design shall be such that when the bucket is pulledout from the water surface, there shall be no occurrence of sudden jerk due to upward motion. Fire Fighting bucket shall provide bucket filling through rapid dip filling method & filling with the Shallow Fill Pump. The motor, impeller and housing of shallow pump shall be contained within a filter basket which serves to protect the components from impact damage while also acting as a debris screen. This filter basket installation on bucket shall be provided with a standoff from bottom of the bucket to prevent pump inlet from getting too close to the bottom of the water source. Filling the Bucket During rapid dip filling, once the bucket touches the water surface, bucket shall immediately tilt and sink itself by design. The minimum depth requirement of different water sources (open tank, pond, lake etc.) shall be specified by the vendor for both rapid filling and shallow fill pump methods. Operational procedure including Do’s and Dont’s for bucket filling shall be provided by the Vendor. Characteristics of Bucket • Capacity : 820-880 Liters • Empty Weight : Shall be lesser than 58 Kg • Size : Shall be specified by vendor Characteristics of Shallow Fill Pump • Capacity : Min 25 liters/sec • Weight : Max 10 kg • Size : Shall be specified by vendor