Loading
Loading…
Loading…
2,636 results • Best match
Supply of Metal 3D printing System at School of Electronics and Communication
(1) Technology: metal, polymer composite (2) Print Head: Single high-temperature direct-drive extruder with dual-drive gears. 1.75 mm filament (metal-polymer composite) diameter. All-metal hotend (e.g. hardened copper block) rated up to 500 °C for high-temp filaments. Volumetric flow ≥36 mm³/s (high-flow capacity with 1.4 mm nozzle). Dual-grip filament gears ensure reliable feeding. (3) 3) Nozzle: Tool-free, hand-interchangeable nozzle at ambient temperature. (no heat-up or tools required). Standard nozzles (Ø0.6 mm) with swappable sizes up to ~1.4 mm for high-flow printing. (4) Layer Height: Down to 0.150 mm. (5) Positioning Precision: Positional accuracy X/Y 12.5 µm, Z 2.5 µm. Overall print accuracy ~±0.150 mm (6) Build Volume: 150 × 150 × 150 mm (green part). After sintering: ~120 × 120 × 120 mm (assuming 15–20% shrinkage). (7) Build Platform: Heated bed up to 120 °C with reinforced composite surface and automatic bed levelling. (8) Supported Materials: Metal composite filaments including stainless steels (316L, 17-4), nickel alloys (Inconel® 718), copper, bronze, etc. (9) Material Throughput: All-metal hotend and hardened nozzle handle abrasive metal filaments. (10) Temperature Capability: Hotend to ≥500 °C, bed to 120 °C. (11) Operating Conditions: Ambient 15–40 °C, 10–90% RH (non-condensing). Recommend the enclosed setup with ventilation. (12) Connectivity: USB, Wi‑Fi, optional Ethernet. Supports SD card/direct USB. (13) User Interface: 7″ colour touchscreen with intuitive menus. (14) Sensors & Safety: Filament run-out sensor, nozzle clog/flow sensor, thermal-runaway protection, end-stop & motor fault detection. (15) Machine Construction: Rigid steel frame (≥80 kg). Precision linear guides and bearings. Fixed metal gantry design. (16) Software: OEM slicing software (STL, OBJ, 3MF). Compatible with Windows/macOS/Linux. (17) Electrical & Safety: RFI filters, fuses, and certifications.
Supply installation and commissioning of inverter type split
inverter type split AC units 9 Supplying and fixing of 4sq mm X 03Run flexible FRLS multicore copper wire working voltage upto 1100Volts
NETWORK CABLE
CAT 6 Cable CAT6 UTP Networking Cable Copper Conductor Suitable for Gigabit Ethernet ISIISO Compliant
Requirement of spares of Lube Oil Pump (150X100UCW 32) and Emergency Oil pump (50X40UCW 25) of TDBFP installed make M/s Kirloskar Pumps Ebara Pumps Ltd. of Unit 7 and 8 (2X660MW), STPS-SC, Suratgarh for 2026-27
Part No. 067.00 Oil Ring, CAST COPPER ALLOY, ASTM B584 - Gr.C83600
Equipment Items
PCB Prototype Machine PCB Prototyping & Antenna fabrication System Manual Software Copper CAM & Mach3 Mill Resolution (X/Y) 3.125 Micro Meter Working Area (X/Y/Z)(mm) 200x300x120 mm Minimum Width Line & Space in mm 0.1 (4 mil) Max Travel Speed (mm/sec) 58 (2.28 “) Drilling (mm), 0.2 -3.175 (8-125 mil) Maximum Drilling Cycles/ Min 50 Main Axle Power Rate 300 W Main Axle Rotating Speed 25000 RPM Max working speed 3500mm/min Feeding Height 120 mm Working drive 0.02-0.05mm Repositioning accuracy 0.01-0.02mm Supported format Standard Gerber,DXF,Excellon Capability of Processing various materials - FR4, Copper clad, Acrylic, Metal, Aluminum and etc., Power - 220 V AC Weight - 52 Kg
Supply, installation, testing, and commissioning of one set of 120V, 400Ah high-discharge Plante type lead-acid battery bank, comprising 60 nos. 2V/400Ah Plante cells, along with buy-back of 60 nos. existing 2V/400Ah (YKP33) cells at LTPS.
Supply of one set 120 V, 400 AH Battery Bank consisting of 60 nos. 2 Volt/400 Ah Plante cell, high discharge type in specially moulded transparent SN container complete with Tubular positive plates, pasted negative plates, vent plugs, insulators, lead plated copper connectors, nuts, bolts washers etc. dry & uncharged as per IS 1652-2013. The above Battery Bank will be supplied along with the following: a) Steel stand: Non-Seismic MS Steel Stand having two coats of sulphuric acid corrosion resistant polyurethane lacquer along with cell number sticker, suitable stand insulator. b) Required Sulphuric Acid sufficient for first filling of the above battery (including 10% acid spare) in non-returnable polyethylene Jerry Cans suitably and safely packed. c) Inter row & Inter Tier connector.