Painting Works Tenders

painting in iron work.

Power Spray or by hand painting of pipelines / pipings/ fittings,piping spool, fixtures, vessels and structural steel etc. including , supply of paint and application of 2 coat of high build chlorinated rubber. Poly urethane / zinc phosphate primer of 70 micron each and two coats of finished paint of epoxy paint of golden yellow colour 90 micron each of approved make as per the approved vendor list attached with this tender to give an even shade after proper scraping of existing paint by power brushing or suitable method and clearing of surface free from foreign materials to give an even shade after proper scraping of existing paint by power brushing or suitable method and clearing of surface free from foreign materials including stencilling of line numbers, pipe tagging, flow direction arrow, other lettering as found condition of pipeline as per instruction of OWNER EIC.

Cleaning of internal wall/floors of RCC over head reservoir of Capacity 25000 Gallon including removing fine sand/silt deposited inside the over head reservoirs with the help of wire brushes and removing any fungus formation inside the tank, removing the waste by opening wash out valves and applying caustic soda solution and one coat of lime wash internally including cement base white wash of complete OH tank to the external wall, bottom surface, pillar and painting of raising main pipe line and delivery line by black paint and writing work with one coat of synthetic enamel paint as per colour code mentioning (a) date of cleaning (b) Next due date of cleaning (c) Capacity of tank etc, complete all as specified and as directed. NOTE :All precautionery measure such as safety belt, climbing rope, scaffolding etc to be taken by the contractor to safeguard human life while working on overhead reservoir. The rates quoted for the item shall be inclusive of the same.

M&L for taking out defective sewage pumping set centrifugal type of any make of 25 HP capacity by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil work shop for cleaning, scraping, painting, machine repair work and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re-assembling, installation, commissioning and testing complete all as specified and directed. Note: (a) The defective / worn out spare parts shall be measured and paid separately under relevant items as supply only. (b) The rewinding of motor shall be measured and paid separately under relevant items.

M&L for preparation of new wall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE. (Note:- (i) After painting works, cleaning of all floors, glass and furniture by own arrangement (ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.)