Loading
Loading…
Loading…
15,030 results • Best match
FDR GENERAL FDR 2018 19 Improvements to Arasammood Kuzhivila road by providing BM and BC from Ch 0 000 to 3 000 PART TS II 1540 to 2100 Civil works General Civil Work 1
8.4.4:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 80 mm x 60 mm rectangular
Construction and Installation of 1000 LPH RO Plant in Hariyappanahalli (Mastipalya) village in Kora GP of Tumkur taluk Tumkur district
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Provision of side pathway trolley refugee on 25 nos. girder bridges over Lucknow Division in which Br. 15 North, 803 UP, 27A DN, 27A Yard line, 38DN, 39DN, 45DN, 59DN in UTR-AMG Bypass, Br.545A DN, 615 UP in CIL-RBL-UTR, Br. 26 in ABP-TD, 206 UP ZBD-ABP, Br. 24 UP &DN, 179UP & 179DN in DDUBSB, Br. 576A UP (SLN- UTR),Br. 544 DN ZBD-SLN, Br.382,382 A UP, 382B UP, 383 & 383UP in ABP-DYD, Br. 433A UP & 440Din DYD-LKO.
215.00 115069.69 ladders, inspection platforms, Trolley refuges etc., on bridges with structural steel conforming to IS:2062 including welding / bolting, priming painting with one coat of ready mixed paint of Zinc Chromate (IS:104) with DFT of 25-30 microns followed by one coat of Zinc Chrome Red Oxide (IS:2074) with DFT of 25 microns with all material, labour, T&P as a complete job. Note: Painting shall be paid separately under relevant item. Painting of cleaned plate/composite bridge girders including all scaffolding along with provision of Jhoola / hanging scaffolding ladders etc. where required.
Providing Shed for Vehicle Parking at Dr. YSR Architecture and Fine Arts University, Kadapa
Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 300 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with bolts & nuts 8 mm dia including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges , complete for finished item of work in all floors. (Make: Jindal, TATA, JSW)
SDSTPS -3X800MW- Strengthening of beams for capacity enhancement of hoist from 5 Ton to 12 Ton at Air Compressor House of Stage -I.
Supply, fabrication, erection and painting of structural steel comprising MS plates, ISMBs and other rolled sections of various sizes at an unsupported elevation of up to EL+9.00 meters (location as per enclosed drawings), including procurement and conveyance of all structural steel materials, cutting, drilling, edge preparation, grinding, fitting, shop fabrication, hoisting, positioning, alignment, fixing in position and welding/bolting at site with all consumables, painting with 3 coats including surface preparation of steel using power tools to remove rust, scale, oil and grease and painting of structural steel by applying one coat of Protective Mastic primer, one undercoat of glass flake filled epoxy paint and one final coat of aliphatic polyurethane paint to achieve minimum dry film thickness (DFT) of 100 microns, 100 microns and 50 microns respectively, in accordance with IS 1477 (Part 2):1971 and manufacturer’s specifications. The rate includes all hire charges of machinery and cost of consumables with all leads and lifts, provision of all safety measures for working at height such as certified scaffolding with guard rails and toe boards, full body harness with double lanyards, independent lifelines, safety nets, safe access arrangements, PPE, barricading, permit-to-work system, fire safety arrangements for hot work and supervision, complying with relevant provisions of Factories Act 1948 India and as directed by the Engineer-in-Charge, complete for finished item of work. Strengthening of structure for hoist capacity enhancement shall confirm to approved drawings. Note: 1) The work is to be carried out in confined, congested and inaccessible locations involving restricted working space and limited approach, and the rates shall be deemed to include all associated difficulties in handling, shifting, staging, erection and execution under such conditions without any extra claim 2) All paints including thinner will be issued by the department free of cost 3) Strengthening of structure for Hoist capacity enhancement shall conform to approved drawings
ANGANWADI BUILDING NEED REPAIR FOR FLOOR,WINDOW WORK AD CHINURPUDUPATTAI PANCHAYAT in Parangipettai block
Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specifications and as directed by the departmental officers.