SDSTPS

Supply, fabrication, erection and painting of structural steel comprising MS plates, ISMBs and other rolled sections of various sizes at an unsupported elevation of up to EL+9.00 meters (location as per enclosed drawings), including procurement and conveyance of all structural steel materials, cutting, drilling, edge preparation, grinding, fitting, shop fabrication, hoisting, positioning, alignment, fixing in position and welding/bolting at site with all consumables, painting with 3 coats including surface preparation of steel using power tools to remove rust, scale, oil and grease and painting of structural steel by applying one coat of Protective Mastic primer, one undercoat of glass flake filled epoxy paint and one final coat of aliphatic polyurethane paint to achieve minimum dry film thickness (DFT) of 100 microns, 100 microns and 50 microns respectively, in accordance with IS 1477 (Part 2):1971 and manufacturer’s specifications. The rate includes all hire charges of machinery and cost of consumables with all leads and lifts, provision of all safety measures for working at height such as certified scaffolding with guard rails and toe boards, full body harness with double lanyards, independent lifelines, safety nets, safe access arrangements, PPE, barricading, permit-to-work system, fire safety arrangements for hot work and supervision, complying with relevant provisions of Factories Act 1948 India and as directed by the Engineer-in-Charge, complete for finished item of work. Strengthening of structure for hoist capacity enhancement shall confirm to approved drawings. Note: 1) The work is to be carried out in confined, congested and inaccessible locations involving restricted working space and limited approach, and the rates shall be deemed to include all associated difficulties in handling, shifting, staging, erection and execution under such conditions without any extra claim 2) All paints including thinner will be issued by the department free of cost 3) Strengthening of structure for Hoist capacity enhancement shall conform to approved drawings