Loading
Loading…
Loading…
2,454 results • Best match
Signalling work in connection with Provision of one additional goods shed line of 750M at Phephna station of BSB division & Provision of Multi section Digital axle counter in Berthing tracks & water logging track portions at BUI & PEP station of Varanasi division.
Preparation of Station Working Rule (SWR)Including Appendix- A, B , C , D , E , E, F and G in Hindi and English on Approved SIP/ESP/ST/SWRD/PD/VDU Layout etc. asper the Extant Practice being followed in Lucknow Division of N.E. Railway. 57 The Contractor shall Supply Two Paper Print of the SWR as Draft for Approval and Comments. Once the Approval is Given he shall Supply Two Set Paper Prints of the SWR for Final Approval and Signature of the Concerned Officials On obtaining final Approval, The Contractor shall Supply 10Sets of the SWR And 1 Set Gate Working Rule (GWR) of each LC Gate (App.-A) Duly Photocopies of SWR. The Approved SWR shall be Finally Supplied in 2 Pen drives.
Signaling Cable, size:12CoreX1.5 sq.mm,Armoured, conforming to RDSO specification No.:IRS:S-63/2014(Rev.4.0)with latest amendments/version.
Description :Signaling Cable, size:12CoreX1.5 sq.mm,Armoured, conforming to RDSO specification N o.:IRS:S-63/2014(Rev.4.0)with latest amendments/version. [ Warranty Period: 30 Months after the d ate of delivery ] ] Consignee NJP GSD, NFR West Bengal 15.00 Kilometre UVAM Item ref. ( Item Id :- 3100054 - PVC Insulated Armoured, Unscreened, Underground Railway Signaling Cable , Sub Item Id:-3100054001 - PVC Insulated Armoured, Unscreened, Underground Railway Signaling Cable )
OHE Modification/slewing/Re-slewing work in connection with provision of LHS/RUB/additional opening work at various locations LC Gates No. 25, 26,33,41,42,49,93,94,104,115 under Rajkot division.
Transportation of material from Railway depot to work site or released material from work site to railway depot
Alteration and Addition to OHE in connection with Creation of TMC siding facilities at five stations. (LPR, SUNR, WKR, RJT & DAC) of Rajkot Division.
Transportation of material from Railway depot to work site or released material from work site to railway depot
OHE Modification work in connection with construction of new Line-14 and CSR increment of existing Line No-15 at HAPA station of Rajkot division.
Transportation of material from Railway depot to work site or released material from work site to railway depot
Track Maintenance works on Peralam -Karaikal section in Senior section Engineer/P.Way/B-Thiruvarur section for a period of one year.
100.00 using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. 25mm gap Cess Welding and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with Contractor's labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including all required handling and rehandling of rails, marking of welded joint, painting weld collar with anticorrosive paint, as directed by Engineer in charge. Note: 1. Welding shall be carried out only by trained welder having valid competency certificate using RDSO approved Alumino Thermit Welding Portions, 3 piece prefabricated mould (Zircon washed) manually pressed, Single shot crucible fitted with auto tapping thimble and Compressed Air Petrol/LPG preheating technique as per RDSO Specification No IRST/19-2020 with latest amendment. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing.