Loading
Loading…
Loading…
2,458 results • Best match
Provision of Shunting Neck (BXN end) and a Pit line at AGC
25mm gap 'in-situ' welding during traffic block and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position 20 and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Welding shall be carried out only by trained welder having valid competency certificate using RDSO approved Alumino Thermit Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED) manually pressed, Single shot crucible fitted with auto tapping thimble and Compressed Air Petrol/LPG preheating technique as per RDSO Specification No IRST/19-2020 with latest amendment. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Only required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. All other items required shall be supplied by the Contractor. For 60 Kg - 90 UTS Rail Above/
SC-MUE section : TFTR-Cess Work with Toe Bank under ADEN/NZB jurisdiction
cum Earthwork in cutting in formation, trolley refuges, side drains, level crossing approaches, platforms, catch water drains, diversion of nallah & finishing to required dimension and slopes to obtain a neat appearance to standard profile inclusive of all labour, materials, plant & machinery, leading all cut spoils either to make spoil dumps or for filling in embankment with leads within 2 km on either side of edge of the cutting(s) including all lifts, ascent, descent, loading, unloading, bailing & pumping out water, if required, clearance of site and all other works incidental thereto for completing the work as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest updated correction slips and to the satisfaction of the Engineer-in- Charge. Note: (i) All usable earth arising from cut spoils shall be led into bank formation and Unusable spoils shall be dumped / stacked away from toe of embankment. (ii) All hard rock /and boulders not fit for filling will be stacked by the contractor and will be property of the Railways. (iii)Cut trees shall be property of Railways and to be deposited in the railway godown unless specified otherwise in the Conditions of Contract.
Sr.DEN/North Jurisdiction :- Supply of welding portion 60 Kg-R 260 grade, 52 kg, equipments and supervision of welding (Balance work)
B-Items of work that are not covered under Indian Railway Unified
Signalling work in connection with provision of second goods shed common running line of 750M at Phariya station of BSB division.
Preparation of Station Working Rule (SWR)Including Appendix- A, B , C , D , E , E, Fand G in Hindi and English on Approved SIP/ESP/ST/SWRD/PD/VDU Layout etc. asper the Extant Practice being followed in Lucknow Division of N.E. Railway. 77 The Contractor shall Supply Two Paper Print of the SWR as Draft for Approval and Comments. Once the Approval is given he shall Supply Two Set Paper Prints of the SWR for Final Approval and Signature of the Concerned Officials On obtaining final Approval, The Contractor shall Supply 10Sets of the SWR And 1 Set Gate Working Rule (GWR) of each LC Gate (App.-A) Duly Photocopies of SWR. The Approved SWR shall be Finally Supplied in 2 Pen drives.
Augmentation and upkeep of various components/parts of AFDAS (Automatic Fire Detection and Alarm System) in connection with RDSO TAN 3009 at various stations of Jaipur division.
over TCP/lP and shall have clock synchronization facility. This includes Networking module (TCP/IP) for control panel along with power supply unit and battery set of required capacity for 24 hours backup as per RDSO specification. The panel should support degrade mode operation in compliance with IS: 2189, EN54 standards and Underwriters Laboratory (UL) listed. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after execution.
PVC insulated copper wire 24/0.2 mm, colour: RED,PVC insulated copper wire 24/0.2 mm, colour: BLACK
Description :PVC insulated copper wire 24/0.2 mm, colour: RED , ATC Spec IRS/76/89 with latest amendm ent (cable shall be supplied in 100 meter bundle). [ Warranty Period: 30 Months after the date of deliver y]] Consignee SSE/ES/WS/MFT, SCR Telangana 11500.00 Metre UVAM Item ref. ( Item Id :- 3100050 - signalling Indoor cable , Sub Item Id:-3100050001 - PVC Insulated Railway Signalling Indoor Single Core Cable )