Railway Works & Supplies Tenders

Supply, fixing, testing & commissioning of heavy duty 400 mm sweep Pedestal fan of metallic body suitable for single phase 230 volt AC supply as per direction at Railway site Engineer.

Laying of foundations for erecting of tower of 66kv Line on Labour rates Lump-Sum basic as per PSPCL drawings including excavation, placement of steel reinforcement, concreting, stub setting, form work, centering shoring, shuttering back filling and other allied works required for setting stubs including the cost of sand and gravel complete in all respects as per PWD specifications crusher & sand to be arranged by the contractor. All other material i.e. Cement, Steel, Stub Setting templates etc. shall be provided by PSPCL from its stores at Bathinda,Verpal and Gobindgarh ) free of Cost.

Const. of 02 LANE R.O.B. in lieu of LC No. 20-C at Railway K.M. 3212-14 on DLI-UMB section near Narela Railway Station crossing Akbarpur Barota to Kheri Manajat Road Distt. Sonipat (Pdg. Shifting of 33 KV HT line)

88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 89 18.7.3 25 mm nominal dia Pipes Metre 804 401.55 322846.2 BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 90 18.8.1 15 mm nominal dia Pipes Metre 424 497.8 211067.2 91 18.8.2 20 mm nominal dia Pipes Metre 816 537.6 438681.6 92 18.8.3 25 mm nominal dia Pipes Metre 680 627.25 426530 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 93 18.12.6 50 mm dia nominal bore Metre 8560 762.15 6524004 94 18.12.8 80 mm dia nominal bore Metre 840 1041.7 875028 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 95 18.15.1 15 mm nominal bore Each 48 353.25 16956 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 96 18.17.1 25 mm nominal bore Each 212 622.4 131948.8 97 18.17.1A 20 mm nominal bore Each 48 539.95 25917.6 98 18.17.4 50 mm nominal bore Each 228 1026.65 234076.2 99 18.17.6 80 mm nominal bore Each 24 2604.55 62509.2 Providing and fixing gun metal non- return 18.19 valve of approved quality (screwed end) : 18.19.4 50 mm nominal bore 100 18.19.4.1 Horizontal Each 10 1371.2 13712 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 96000 11 1056000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 101 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing Each 45 125.6 5652 102 not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 67 118.5 7939.5 103 not less than 88 gms Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 80 112.8 9024 104 not less than 75 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 105 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 120 51.85 6222 18.59S AIR VALVE & WATER METER (BULK TYPE) BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.3 25 mm nominal bore, 152mm long, weighing Each 32 523.8 16761.6 106 not less than 440 gms 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 352 495.05 174257.6 107 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 384 598.6 229862.4 108 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 80 1176.8 94144 109 (weight not less than 10kg/sqm) Total 80524772.81