Railway Works & Supplies Tenders

88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 111 18.7.3 25 mm nominal dia Pipes Metre 603 401.55 242134.65 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 112 18.8.1 15 mm nominal dia Pipes Metre 388 497.8 193146.4 113 18.8.2 20 mm nominal dia Pipes Metre 747 537.6 401587.2 114 18.8.3 25 mm nominal dia Pipes Metre 633.5 627.25 397362.88 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 115 18.9.3 25 mm nominal dia Pipes Metre 27.5 355.4 9773.5 BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 116 18.12.6 50 mm dia nominal bore Metre 7845 762.15 5979066.75 117 18.12.8 80 mm dia nominal bore Metre 770 1041.7 802109 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 118 18.13.1 25 to 40 mm nominal bore Each 11 911.9 10030.9 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 119 18.15.1 15 mm nominal bore Each 49 353.25 17309.25 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 120 18.17.1 25 mm nominal bore Each 182 622.4 113276.8 121 18.17.1A 20 mm nominal bore Each 36 539.95 19438.2 122 18.17.4 50 mm nominal bore Each 207 1026.65 212516.55 123 18.17.6 80 mm nominal bore Each 22 2604.55 57300.1 Providing and fixing gun metal non- return 18.19 valve of approved quality (screwed end) : 18.19.4 50 mm nominal bore 124 18.19.4.1 Horizontal Each 9 1371.2 12340.8 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 83000 11 913000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 125 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing Each 34 125.6 4270.4 126 not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 50 118.5 5925 127 not less than 88 gms Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 60 112.8 6768 128 not less than 75 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 129 18.58.1.1 100 mm nominal dia Each 11 37.6 413.6 130 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 90 51.85 4666.5 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.3 25 mm nominal bore, 152mm long, weighing Each 24 523.8 12571.2 131 not less than 440 gms 21.0 ALUMINIUM WORK 21.1S General BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 354.75 495.05 175618.99 132 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 383.75 598.6 229712.75 133 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 127.5 1176.8 150042 134 (weight not less than 10kg/sqm) Total 81117220.16

[4.33]Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. [Through Rate]

Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus 1 soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines. All kinds of soils