Loading
Loading…
Loading…
1,285 results • Best match
Construction of Wellness Centre along with High End Fountain at Nagrota Bagwan, District Kangra, Himachal Pradesh
Solar Panel System:- SITC of 25KW Solar Power Plant Havells make including Solar PV Modules 540Wp (mono type): 47 Nos, Solar Grid Tie Inverter 25KW: 1 Nos., DCDB (DC Safety unit -Supply of DCDB (DC- Safety unit) with Fuses & DC SPD class-1 Nos, AC Distribution Box: Main AC Distribution Box complete with 1 Nos. Class I + II Surge Protective Device with CT & Multifunction Meter & required MCCB/MCB, Cables as per site: From PV Module To LT Panel: 1 C X 4 / 6 Sq mm Solar cable (Module to DCDB), 3.5 C X 6 Sq mm cu wire (ACDB to LT Panel), Required Earthing System: Module Earthing, Inverter & LA earthing, Conduits / Cable Tray: Conduit Pipes, Cable trays, RJ-45 connector as per the site condition, complete in all respect, including all accessory, mounting structure of suitable size including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells/Luminous/Tata or equivalent.
Construction of State Environment Impact and Assessment Authority (SEIAA) at plot no. IP8 Sector 5B, MDC, Panchkula Construction of State Environment Impact and Assessment Authority (SEIAA) at plot no. IP8 Sector 5B, MDC, Panchkula
SOLAR PANELS Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz plus /- 2.5 Hz, output voltage suitable to generate AC (c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency (d) Data Monitoring System complete with accessories. (e) Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (f) Lightning and surge voltage protection. (g) Connections and Interconnections by supplying and fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying and fixing of necessary channel/conduit lugs and other accessories etc. as required. 2. Above 10 kWp and up to 100 Kwp (HSR 32.70.2)
DSEITC of Integrated Type SPV Road Lights along the newly constructed paver path at CURAJ
Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 30 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4), charging time 8-10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt, Input voltage: 12V DC , Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, IP-66,IK-08, CRI >70 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPER 15 A, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K (As per American National Standard Institute (ANSI Bin)) , life time (LED,Driver & electrical circuitary) of 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic swich on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. All as per pre approved by Engineer in-charge complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, complete with mounting structure for the battery and accessories suitable for withstand wind storm speed as per the site location. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
REPAIR OR MAINTENANCE OF ROAD, HARDSTANDING ETC. AT HQ EAC (U) AF UNDER GE (I) (AF) SHILLONG
Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V) consisting of super bright LED completed as per manufactures instructions including taking down old ones etc. all as specified and directed incl taking out old unserviceable studs. complete all as specified and directed.
SPL REPAIR TO ROAD FROM BLDG NO T-16 (OR MD ACCN ) TO BLDG NO T-14 (OR MD ACCN ) UNDER GE DEHRADUN
S&F in repair solar cat eye aluminium alloy shell (100% water proof design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one Nl-ed rechargeable battery (1.2V/1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturers instructions etc. all as specified and directed.
REPAIRS / RESURFACING OF ROAD UPTO 5.5 MTRS WIDE AND APPROACH PATH INCLUDING DRESSING OF ROAD SIDE BERMS IN DOMESTIC AREA AND PERIMETER ROADS AT AFA HYDERABAD
Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions etc complete all as specified and as directed
