Loading
Loading…
Loading…
1,344 results • Best match
Construction of 2 Nos. E type quarter Building at Gurudijhatia PHC under Athagarh block of Cuttack District for the year 2025-26.
Area lightings Supply of 60 W AIO Solar street lights having 150Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >9600 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .Make:Crompton/Panasonic/Havells/Phillips 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab
Construction of 2 Nos. E type quarter Building at Jagiapada PHC under Athagarh block of Cuttack District for the year 2025-26.
Area lightings Supply of 60 W AIO Solar street lights having 150Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >9600 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .Make:Crompton/Panasonic/Havells/Phillips 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab
COMPREHENSIVE REPAIR OF B/R AND E/M NATURE WORK OF MD AND OTM ACCN INCL ROOF TREATMENT, PERIODICALS, SHAFT REPAIR, SUNKEN TREATMENT, PLASTER, JOINERY, SUMMER/WINTER APPLIANCES, PT WIRING ETC IN APS, MES POONCH LINE AT DAMANA UNDER GE JAMMU
Supply only toughened glass panel suitable for 200 LPD solar water heater complete all as specified and as directed.
SPL REPAIR/ REPLACEMENT OF CEILING FANS AND PROVN OF GEYSERS, WATER COOLER, DESERT COOLER, AC, SECURITY LIGHT, WALL FAN AND OTHER SANCTIONED WORKS UNDER AGE E/M AT NAMS (4th Call)
Supply and fixing rotational moulded polyethylene water storage tank of 1000 ltr capacity (cylinderical vertical with closed top) Triple layer Food grade hoisted and fixed in position, kept over the height of hot water tank of solar water heater on MS angle iron frame of size 35mm x 35mm x 5mm duly grouted in PCC 1:3:6, complete all as specified and directed. Note: Cost of MS angle iron frame and PCC work shall be measured and paid separtely uder relvant item of the contract.
Development work of Ramleela Place at Somvar ki Bazar, Bilaspur, District Rampur (U.P.)
Solar Street Light Design, Supply, Installation, Commissioning and 5 years Warranty with comprehensive Maintenance of complete Solar Street Lighting system with performance specifications of a White Light Emitting Diode (W-LED) light source based solar lighting system inclusive of all taxes & duties, storage, transportation up to site, GST, insurance etc what so ever and any other job required to properly execute the complete work, The broad performance specifications of a White Light Emitting Diode (W-LED) light source based solar lighting system are given below - ( White Light Emitting Diode (W-LED) 18 Watt(LED +Driver) White colour (colour temperature 5500-6500 K). The Lumen efficacy of LEDminimum 135 lumens/Watt and the lumens output (luminous flux) of luminaries should be >2250 lumen. The illumination should be uniform without dark bands or abrupt variations, and soothing to the eye. Higher light output will be preferred.
DEVELOPMENT OF TOURIST FACILITIES AT SONEPUR MELA GROUND, SARAN IN BIHAR.
NS-14 Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz plus /- 2.5 Hz, output voltage suitable to generate AC (c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency (d) Data Monitoring System complete with accessories. (e) Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (f) Lightning and surge voltage protection. (g) Connections and Interconnections by supplying and fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power