Loading
Loading…
Loading…
1,392 results • Best match
Construction of High Level Bridge over Dhowae River at ch 41st km and Construction of High Level Bridge over Mudko River at ch 30th km of Dumka-Hansdiha Road under Road Division Dumka for the year 2026-27
Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.) SOR - 8.35 (For Both Bridges)
Construction of High Level Bridge over Koyal river at 61st Km of Khunti Torpa Kolebira Road Under Road Division Gumla for the year 2026 27
Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.)
CO ORs Living Accommodation with Kitchen and Dining Hall at Forward Post of 47th Bn ITBP in Eastern Ladakh UT at a height of 14170 Feet and 214 Km from Leh connected with motarable kuchha track
Supplying installtion and commissioning at site of DRDO |biodigesters of different sizes as per requirement of site with 150mm thick PVF insulation on all sides along with submerged heaters 4Nos of 150W, length of each heating element would be appx. 75cm , which will be fitted on uniquely esigned screw mounted system fron1 the top of the tank along with provisioning for change the element. Each element should be enclosed in stainless steel pipes as jacket that will filled up with hi therm oil and also consisting of two tempreture sensors & thermostats controlers to keep the biodegester liquid wam as per specification including Solar panels and PVM etc which will be required for electricity complete.as per direction of Engineer-In-Charge. Biodigesters 2500 litre capacity
Renovation of Urmil Inspection House and Control Room under of Irrigation Division Mahoba in district Mahoba. (LOT-07)
Providing & Fixing 5KW Off-grid Solar Power Plant (Govt Building) including all cost of material, labour, T&P etc. complete.
COMPREHENSIVE REPAIR OF B/R AND E/M NATURE WORK OF MD AND OTM ACCN INCL ROOF TREATMENT, PERIODICALS, SHAFT REPAIR, SUNKEN TREATMENT, PLASTER, JOINERY, SUMMER/WINTER APPLIANCES, PT WIRING ETC IN APS, MES POONCH LINE AT DAMANA UNDER GE JAMMU
Supply only toughened glass panel suitable for 200 LPD solar water heater complete all as specified and as directed.
Development work of Ramleela Place at Somvar ki Bazar, Bilaspur, District Rampur (U.P.)
Solar Street Light Design, Supply, Installation, Commissioning and 5 years Warranty with comprehensive Maintenance of complete Solar Street Lighting system with performance specifications of a White Light Emitting Diode (W-LED) light source based solar lighting system inclusive of all taxes & duties, storage, transportation up to site, GST, insurance etc what so ever and any other job required to properly execute the complete work, The broad performance specifications of a White Light Emitting Diode (W-LED) light source based solar lighting system are given below - ( White Light Emitting Diode (W-LED) 18 Watt(LED +Driver) White colour (colour temperature 5500-6500 K). The Lumen efficacy of LEDminimum 135 lumens/Watt and the lumens output (luminous flux) of luminaries should be >2250 lumen. The illumination should be uniform without dark bands or abrupt variations, and soothing to the eye. Higher light output will be preferred.