Solar & Renewable Energy Tenders

M & L for kerbstone having dimensions of 0.3m in length 0.10m in width and 0.30 in height constructed from high strength concrete M-35 and it incorporate 6mm thick 40 grade acrylic sheets in milky white for illumination, emitting a red blinking light at 4000k and powered by IP68 LED technology, the kerbstones operate on solar energy providing a brightness fo 60 lumens Solar panels will be attached individually to each kerbstone Installation involves a pre prepared PCC bed. The kerbstones comply with IS Code 5758 and IRC standards for road signage. Additional features include customizable color-changing LED's. Quality assurance includes water and impact testing, while cleanliness and wiring integrity.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd including taking down old u/s cat eyes completed as per manufactures instructions etc. complete all as specified and directed.

[34.36]Solar RPM/ Stud Providing and installation of solar cat eye produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the solar stud should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree smooth illumination. The Solar stud shall be round in shape for providing illumination in all directions. The solar stud shall also have high reflective polycarbonate/ methyl methecrylate lenses for conspicuity in passive mode and dual shanks for improved road presence. The solar studs are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cat eye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 5 mm. The body of the solar cat eye shall be resistant to dust and water ingress as per IP 65 standards. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. [Through Rate]