Loading
Loading…
Loading…
1,393 results • Best match
Construction of various infrastructures at camp of 48 Bn ITB Police, Katihar (Bihar) at an altitude of 9320 feet and a distance of approx. 25 Km from Chungthang, Distt-Mangan, North Sikkim. Camp connected by road.
Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 30 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4) 3.2Volt (Cell) 30 AH battery, charging time 8- 10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt, Input voltage: 12V DC , Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-08, CRI >80 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPER 15 A, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K /6000°K (As per American National Standard Institute (ANSI Bin)) , life time (LED,Driver & electrical circuitry) of 50K hours lamp burring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic switch on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output All as per pre approved by Engineer in-charge complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required.(Part 1), for fixtures up to 60 watt. LED light Complete with mounting structure for the battery and accessories and wind storm withstand capacity as per the zone. (Thermal management: heat sink of aluminium housing such that LED junction temperature do'nt rise aboven 90°C) 30 Watt (System lumen efficacy >120 lm/Watt)
SPL REPAIRS TO VARIOUS RD ALONGWITH CONNECTED ITEMS AT CERTAIN AREA AT MORABADI POCKET, RD, PATH, PAVER BLOCK, CULVERT AND HARDSTANDING AT NAMKUM AREA AND RD INCL REPLACEMENT OF DAMAGED CULVERTS, OTHER ASSESTS ALONGWITH ALLIED WORKS UNDER GE RANCHI
Supply and fix in Repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc., complete all as specified and directed.
SPECIAL REPAIR TO CERTAIN EM AND BR WORKS IN ELECTRIC SUPPLY INSTALLATIONS AT KANCHRAPARA MIL STN UNDER GE BARRACKPORE
Supply, erection, installing and testing of Solar LED light fittings with Extruded Aluminium Housing corrosion proof, Solar panel (Mono Crystalline Solar PV module) 60 W , LED power 24 W, Lumen/Watt > 125, Solar Charge Controller - MPPT, Battery capacity - Maintenance free Lithium Ferro Phosphate battery 12.8V - 36 Ah, BIS Approved Cells, Inbuilt BMS for Battery Safety & Enhanced battery life, Operating temperature -20 Degree to + 55 Degree, Designed for 2000 life cycle : > 5yrs life, Faster Charging, Maintenance free Backup for 2 days, PIR Motion Sensor for Automatic brightening & dimming, Lumen(LM) >3120lm, LED life time - 50000hrs, Viewing angle - 120°, Charging time - 1 day, Autonomy 2 days, CCT(K) - 5700K, Mounting height 5-6m, Working temp. -10-+55C, Dimension (mm) 1230*382*55, Net weight 18.5 Kg, including earthwork, PCC foundation as per site requirement with all accessories, cables including taking down old unserviceable solar light fitting complete all as specified and directed by E-in-C. Make: Havells- LHSTAKU7CBAF024 or equivalent in Philips/ Crompton/Wipro.
Carrying out Zone works for period ending 30.06.2027 on Zone No. 3 LC.No. 244B to BPR (Both ex.) Loco Colony, station colony, S.E./works/ P. way,Sig, ADEN /L.office/ IZN, SMG Line, stn. colony, CBJ Line plant & colony / IZN.
Supplying & installation of wind driven turbine Each ventilator with FRM base to match profile of aluminum galvanized corrugated (GC) roofing sheets of SVS make or similar of throat/elbow diameter 24'' to be fixed on the roof of the sheds. Installation shall be done in such manner that the roof remains watertight and leak proof.
Term Contract for maintenance/ improvements and upgradation of toilets on smart toilet complex in Delhi Cantt.
Providing, Fixing, Testing, Commissioning Solar PV roof top panels system suitable for 2KWP capacity complete with all accessories, fittings, cabling, interconnection, switch overs, fan control panel and all essential and necessary ancillary fittings, fixtures, instruments, complete in all respect for trunkey operation. The rates shall include for successful functioning of Solar roof panels as per contractors design for providing specified current rating including cost of all accessories, equipments, materials, cabling, inverter etc. as approved by the Engineer-in-charge
Construction of Type-I, Type-II, Type-III amd Type-IV Residence Building in Campus of Banganga Canal Colony in Distt. Siddharthnagar.
Solar outdoor LED light:-Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 20 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%),, Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4) 3.2Volt (Cell) 24 AH battery, charging time 6- 8 hours, Battery backup time 12 hours (minimum), LED fixture 20 watt, Input voltage: 12V DC , Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-08, CRI >80 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15 , lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K /6000°K (As per American National Standard Institute (ANSI Bin)), life time (LED,Driver & electrical circuitary) of 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic switch on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output All as per pre approved by Engineer in-charge complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required. (Part 1), for fixtures up to 60 watt. LED light Complete with mounting structure for the battery and accessories and wind storm withstand capacity as per the zone. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise aboven 90°C) 35 Watt (System lumen efficacy >120 lm/Watt)