Street Lighting Tenders

Supply and fixing LED Flood light 100 watt 230 volt AC new generation energy saving, environment friendly, long life ,LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening separaters driver compartment with IP66 protection, with impact and corrosion resistant of IK08 complete with driver and lamp and included mild steel bracket, clamps and nut bolts etc including taking down old unserviceable street light complete all as specified. Make - Havells Cat part No ENDURASUNDOWN SL100WLED765PASYBOTG or upgraded model of same make or its equivalent in Wipro / Philips.

Village Kutida, Tal. Chikhaldara, Dist. Amravati. (Including: 105 kWp Solar PV Capacity, 370 kWh Battery Capacity, LT Distribution / Termination points, 30 Nos. Solar Street Lights, 1 No of 5 HP Solar Atta Challi, 1 nos. of 7.5 HP Solar Pump)

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/UV stabilized PC Cover and lenses suitable for 160 watt to 175 watt and Confirming to IP 66 and IK 07 and above protection having Company LOGO Engraved complete in all respect including Labour. 19200-21000 system lumens, High Power LED with lenses, 120Lm/W, PF>0.95, THD10% at full load CRI>70, Polled driver set in Metal housing(Not Circuitory), Phase to phase Protection at 440V &>300V auto cut and re-start feature, 4KV internal Surge Protection, with 5 years warrantee. CAT-AAA

S & F in replacement MS tubular pole weather proof street light poles 9 Mtrs long complete with base plate including PCC foundation as per SSR provision and directed including bracket,bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS/GI poles with street light and street light bracket complete all as specified and directed by EIC.

Supply & Fixing of Decorative LED Street Light of 1 to 3 watt with each , system lumens output with Efficacy> =135lm/ W(@6500k), It's body made of Die cast aluminium using pressure die-casting process. Hole for coupling on pipes Ø 60 mm, for lateral installation. Silicon gasket enusures the IP protection. IP Rating - IP66. Power LED Module with high efficacy LED's on single Printed Circuit Board with metal core plate. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection upto 4kv (an additional surge protection device of 10kV also provided in-built the fixture). PF >0.95 and THD10%. Lenscover in PC (IK09). Estimated LED Lifetime is L70 @ 1,00,000hours minimum. LM79-80 report from LED manufaturer should be submitted. Safety test report as per IEC 60598-2-3; IEC 60598-1 / IS 10322 IEC 61347 i/c connection wire , testing etc-Supporting Test Report from NABL approved lab, with 5 year on site warranty. 40Watt, Color Temp 3000-6500k as required