Street Lighting Tenders

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). (a) 45 watt

S&F in replacement of LED bldg street light fitting 30 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, bracket etc including connection, complete all as specified and directed.

SS49 b) Supply of LED street light luminaire with pressure die cast aluminium housing body for optimal thermal dissapation.Lamp compartment comprising of antiglareclear diffuser with injection moulded polycarbonate material LED streetlight 200W Nos. 12.00 0.00 12.00

Recording of Hourly Reading of Electrical Parameters, monthly energy readings of 33kV / 11kV / 6.6kV / 415V system switch board for testing / analysis purposes, Assisting departmental staff for the day to day highly skilled operational activities of various substations, Attending fuse of calls pertaining to street lighting, Building lighting & power complaints in IGCAR campus during after office hours and holidays, changeover operations carried out to restore the supply system during fault trippings. Note: 1) The High skilled person having qualification, ITI(Electrician)/DEEE qualified electrician having “B”or “C” Electrical license and shall have minimum 2 years of experience in Operation and maintenance of substations. 2) Necessary register for recording the parameters will be provided by the Department free of cost. 3) 8 Hours shift is considered as one operation. 4) Shift includes Round the clock operation.

152 Supplying and erecting LED street light / Flood light 6.00 Nos. 3345.12