Water Treatment & STP Tenders

Design, construction,testing and commissioning of 200 kld Capacity STP/WSP(Prefer nature based technology) at Mahona Nagar Panchyat,Distt-Lucknow with all necessary units, internal & external electrification, piping etc complete including E&M works as per approved design and technical specifications and Pre-Treatment (Latest Independent Technology). The cost includes cost of suitable foundation, Inlet chamber, pre-Treatment units (including one stand-by unit), Primary/Secondary treatments, Disinfection, Disposal of treated sewage by gravity, The Cost also includes other all required civil, electrical, mechanical instrumentation with all related works to ascertain effluent parameters as per prevalent NGT/MoHUA/ MoEFFC norms.Desired effluent parameters should be BOD10mg/l, TSS 10mg/l, N10mg/l, Fecal Coliform100 & COD50mg/l .

[11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer [Through Rate]

A-2, Capital cost for Ghitorni STP 2.Sewage Treatment Plant (STP) (15 MGD)

Providing and fixing of 4mm thickness APP (Atactic Poly Propylene Polymer ) Superthermoly STP sheet polyester based sheet black finishing including 2 coats of silver paint with hot torech treatment over RCC/cemented/CGI Sheet roofing surface by following method (I) Applying with shalitex STP primer for bitumen membrane @ 0.40 ltr/sq. mt. (II) Mt. by the 4mm thickness APP superthermoly STP black sheets polyester based sheet black finishing manufacture of density at @ 25*C, 0.87-0.82 kg/liter over primer coated layer shall be laid using butane torch and scaling all the joints longitudinal as well as transverse prepare the surface complete (III) Cut 1" deep groove above the roof surface on the on the parapet wall and seal edge of APP superthermoly STP polyester sheet into the. groove with polymer modified mortar (IV) in case of low height parapets, terminate APP superthormoly STP polyester sheets pver the parapet (V) for over lapping of joints, rub the polythylene side of membrane by wire brush, apply shali bond APP over the ribbed area, alow it to the tackly and then fix the bitumenious side of APP superthermoly STP sheet polyester with hot application (VI) for longitudinal and tranverse joint pverlaps of 75mm and 100mm respectively is desired. The vital physical and chemical paramater of the membrane shall be as under:- Softening point of membrane not less them 150*c cold flexiblity shall be upto 0"c when tested in accordance with ASTM, joint strengh in longitudunal and transverse direction at 23*c as 350/300N/5cm. Tear strenght in longitudinal and transverse direction as 60/80N in 4mm thick, the weight of roll (40KG for 1 mtr bt 10 mtrs) the laying of membrane shall be got done through the certified applicator.