Anantapur Tender Results

Single pressure gauge 6" complete for brake pipe as per RDSO Drawing No. SKDP-3516 Alt-3 or latest along with LED arrangement conforming to RDSO Drawing No.SKDP-3518 Alt-2 or latest.

Improved Rubber Side Bearer as per RDSO Drawing No.SKVL.608, Alt-2 or Latest and RDSO Specification No.MP.0.49.00.17 (Rev.02) Feb 2021 or latest

Construction of ramp from the ground floor to the first floor to facilitate access for children with special needs CWSN and replacement of Asbestos cement roofing sheets with GI ---- SK University Anantapur , Andhra Pradesh.

Set of spares for HRC Fuse unit 35 amps, to use on 25 kV AC Elec. Locos. Each set consists of the following as per the CLW specn No.CLW/ES/F8 Alt E or with latest alteration and confirming to SCR drawing No.A4/EL/CONV/2677. Full description as per attached annexure.

SET OF 'O' RINGS FOR MAGNET VALVE FOR MAGNET OF ROTEX TYPE 3278 FOR FLASHER LIGHT APPLICATION COMPRISING OF SIX ITEMS. 1) SEAT 'O' RING Sr.No. 9 Position No. 19 Qty/Set. 1 No. 2) BODY 'O' RING Sr.No. 10 Position No. 20 Qty/Set. 1 NO. 3) PISTON 'O' RING Sr.No. 11 Position No 18 Qty/Set. 1 No. 4) M.A. 'O' RING Sr.No. 12 Position No. 22 Qty/Set. 1 No. 5) GUIDE 'O' RING Sr.No.14 Position no. 32 Qty/Set. 1 No. 6) COIL GASKET Sr.No. 17 Position No. 35 Qty/set. 1 NO.

AOH replacement kit for single bottle VCB of M/s. Alstom Rail Transportation India Private Limited (formerly BTIPL) make, Type: BVAC 25.10M07(New). AOH kit No. 3EYC-400260-R1 (Part no. VAOH) Consisting of 6 items, as per attached Annexure.

Improved Rubber Side Bearer as per RDSO Drawing No.SKVL.608, Alt-1 or Latest and RDSO Specification No. MP.0.49.00.17 (Rev.02) Feb 2021 or latest.

Hand Sweeping Banister Brush-IS: 2622 (Q4)

Plunger Assembly with Spring & Spacer for 3 Way Valve Type: 3038 C-10 of M/s ROTEX Make.

Transformer for Cab fan (TFVT) as per the Specification No. CLW/ES/T-29 or latest confirming to sketch No. CLW /ES Sk-1 /T-29 or latest.

Primary Vertical Damper for WAG-7 locomotives as per Item No.1 of RDSO Drawing No.SKVL-295 Alt-2 or latest.

AOH kit for Tap changer consisting of 52 items M/s. REPL/AAL as per attached document

Facility Management Service- Manpower based (Version 2) - Commercial; Data entry operator; Skilled

RUBBER KIT FOR NC-4 ROTEX VALVE, TYPE SR-3103 OF ROTEX MAKE. EACH SET CONSISTS OF FIVE ITEMS. (1) BODY 'O' RING Rotex Pt.No. 20, Qty/set 01 NO. (2) MANUAL ACTUATING 'O' RING. Rotex Pt.No. 22 Qty/set. 01 NO. (3) GUIDE 'O' RING, Rotex Pt.No. 32 Qty/set. 01 NO. 4) COIL GASKET , Rotex Pt.No. 35 Qty/set 01 NO. 5) DIAPHRAGM Rotex Pt.No. 50 Qty/set 01 NO.

Custom Bid for Services - Station cleaning activities of Guntakal station Schedule A PLATFORMS (1 to 7 ), Custom Bid for Services - Schedule B Tracks (1, 2, 3, 4, 5, 6 & 7), Custom Bid for Services - Schedule C Total Foot Over Bridges (FOB) 04 Nos (03 Nos PF to PF and 01 No Outer to Outer) all stair cases in station premises, Custom Bid for Services - Schedule D Tap Booths (48 no s) and Seats on all Platforms & Railway premises, Custom Bid for Services - Schedule E Columns with Dadoos and sitting Arrangement around the Columns (Approx nos), Custom Bid for Services - Schedule F Waiting Halls/Rooms and Retiring Rooms, Custom Bid for Services - Schedule G Concourse area New station building & Old booking office, Custom Bid for Services - Schedule H All offices in Railway station premises including wall- cladding up to 10 feets and path ways, Custom Bid for Services - Schedule I Wall cladding up to 10 feets with high polished Granites on all PFs waiting halls and otheroffices in station, Custom Bid for Services - Schedule J CIRCULATING AREA Circulating area (Old booking office & New station area Open area at Pay & Use toilets, Custom Bid for Services - Schedule K Removal of Cob Webs & dusting from floor to Roof of entire station buildings Electrical fittings from lights Acs fans etc and PVC pipes for wiring Electronic display boards, Custom Bid for Services - Schedule L Cleaning of Sanitary Amenities, Custom Bid for Services - Schedule M DRAINS: Five open drains at PF 1, 6 & 7 etc, Custom Bid for Services - Schedule N Cleaning of Dust Bins & Replacing of Biodegradable cover, Custom Bid for Services - Schedule O Collection of Garbage & Disposal activity, Custom Bid for Services - Schedule P Pest control activityosal activity, Custom Bid for Services - Schedule Q Rodent control activityosal activity, Custom Bid for Services - Schedule R Glass Cleaning activity, Custom Bid for Services - Schedule S Provision of SS Dustbin stands, Custom Bid for Services - Schedule T Roads in North and south colony(CC & BT Roads) in sq m, Custom Bid for Services - Schedule U Open area on either side of the roads in sq m, Custom Bid for Services - Schedule V Garbage collection segregation and disposal, Custom Bid for Services - Schedule W Drains area in Sq ft, Custom Bid for Services - Schedule X Vector control measures (Anti larval mosquito measures) in Sq ft, Custom Bid for Services - Schedule Y Fogging activities at Colony in Sq ft

Hex Head Bolt, High Tensile as per S.C.Rly drg no. A4/EL/WAM4/1371.

Three piece design 1" Ball Valve with steel body and screwed end double female with lateral dismantling make /model 1)M/s. L&T cat L7RBTC 2)M/s. LEGRIS model no. 48322534 as per Drg.No. NOTE: TENDERERS, OTHER THAN OEMs, SHOULD INVARIAB

STEEL FIT--STEEL FIT INTERIORS Composite Office Tables confirming to IS 8126 Drawer and filing unit Brand: STEEL FIT--STEEL FIT INTERIORS (Detailed Description/Specification as per Product # 1 of GeM

Compressor Crank Case Oil

Carbon Di Oxide type Fire Extinguisher as per IS:2878 HY, Tested to 250 Kg/Sqmm, Capacity 2 Kgs for WAG9/WAP7 Confirming to CLW Spec No CLW/MS/3/016 Alt-1 or ABB Drg no IA 132- 00001 and 209.13.240-265 .

Set of bellow bolt with flat and spring washers for traction motor. Set consists of 10 items as detailed in the Annexure attached for ready reference.

Pneumatic Horn Low tone(type B7-36) as per CLW Drawing No.0/2/65/109-Alt-3 or Latest.

Three piece design 3/4 " inch Ball Valve with steel body and screwed end double female with lateral dismantling Make/model required. 1)M/s. L&T cat L7RBTC 2)M/s. LEGRIS model no. 48322027.

Maintenance kit for D1 pilot magnet valve (M/s Rotex type -3081C) for non triplate loco. Each set consisting of 13 items as per attached document.

C2 overhauling kit for D1 pilot magnet valve (M/s Rotex type -3170) of TRIPLATE panel. Each set consisting of nine items as per attached document.

Mobile Contact Segment Assembly for Reverser/ CTF (1500A) as per CLW Specification No. 4TES.101.004, Alt-2 latest and conforming to CLW Drawing No.2TWD.101.050, Alt-7 or latest. NB: The Latest Alteration Number applicable implies the Alteration Number that is prevailing on the date of opening of the Tender only.

SET OF LIMIT SWITCHES FOR BL BOX of Make Siemens consisting of 3 items: (1) LIMIT SWITCH 1 N/O + 1 N/C TYPE:3SE3-020-0AZ1, Qty/Set - 5 Nos. (2) LIMIT SWITCH 2 N/O + 1 N/C TYPE:3SE3-023-1AZ1, Qty/Set - 4 Nos. (3) LIMIT SWITCH 1 N/O + 2 N/C TYPE:3SE3-023-0AZ1, Qty/Set - 3 Nos.

Set of Bottle type High Rupturing Capacity [HRC] Fuses as per CLW Spec.No.CLW/ES/F-8, Alt.E and as per SCR Drawing No.A4/EL/CONV.2677. Each set consists of Three items as : (1) Fuse 16 Amps - Qty/Set -2 Nos. (2) Fuse 35 Amps - Qty/Set - 1 No. (3) Fuse 6 Amps - Qty/Set - 3 Nos

Blocking Diodes (Pos no 123) consist of (1) DIODE BLOCK 1.5 A-1600 V-DSA9 -16F ABB doc.No- HBTB585480R0001 or latest (2) Connector socket 14 POLIG-6A -24 0VAC, ABB doc. No. HBT 415175P0001 or latest (3) Contact socket GRI-MS58 1.0 MM2, ABB doc. No. HBT 415176P0001 or latest (4) Safety Clamp short as per ABB document no- HBT 415177 P0001 or latest & CLW spec No CLW/ES/3/0055 Alt.B or latest.

multi brand Foldable Umbrellas- as per IS: 10675 - Size - 495 (Type 1) Brand: multi brand (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687750097338 dt.03/08/2026)

Set of Pressure gauges as per CLW Specification No. CLW/TS/99/CF/3 Alt-5 consisting of 03 items as follows: 1) Gauge for BP 4 inches, CLW Drg. No. 1209-18- 306-225, Alt 1 - 2 Nos. 2) Gauge for BC1 & BC-2 4 inches, CLW Drg. No. 1209-18- 306-224 - 2 Nos. 3) Gauge for MR - FP 4 inches, CLW Drg. No. 1209-18-306-223 - 02 Nos.

Integral Overcurrent Protection ISIMarked To IS12640 (Part2) (Q2)

Guntakal Division- (i)Electrical Arrangements for the Proposed Interlocating of Mid- section Manned LC Gates (4 Nos) in Guntakal Division (LC-31 (KHT-RCG), LC -34 RCG-YPD), LC -42 (YPD-RU) & LC-76 (TAT-KBA).(ii)Guntakal Division-Electrical Arrangements for the Proposed Intrelocking of MID section Manned LC gates (3Nos) in Guntakal Division (LC-6 (VDD-NDZ) LC39 (YPD-RU) & LC-31 (MGB-KCM)

3 sq. mm solderless crimping socket, type-18A as per S.C. Rly Drawing No. B/TRS/MOD/WAM4/4/79

Socket for Indication lamp to CLW Drg.No.CLW/ES/SK-1/L-5, Alt.E and CLW Specn.CLW/ES/L-5/R. UVAM ID: 2100887

Two way horn valve for E70 brake system part no.014001400.

Gasket for Pressure gauge fixing as per S.C. Rly Drawing No. A4/EL/CONV/4/2705.

Custom Bid for Services - Guntakal Maintenance Repairs replacement in respect of petty works in Staff Quarters station buildings service buildings etc under DEN/North/GTL Jurisdiction for a period of one Year Schedule A Skilled & Unskilled Labour, Custom Bid for Services - Schedule B Fixed components ESI EPF Similar Category Manpower Outsourcing Services - Man-days based Manpower Outsourcing Services - Man-days based

Custom Bid for Services - Guntakal Maintenance Repairs replacement in respect of petty works in Staff Quarters station buildings service buildings etc under Sr DEN South GTL Jurisdiction for a period of one Year Schedule A Skilled & Unskilled Labour, Custom Bid for Services - Schedule B ESI EPF Similar Category Manpower Outsourcing Services - Man-days based Manpower Outsourcing Services - Man-days based

Digital AC clamp on meter suitable for measuring 0-1000A as per Technical Specifications, Digital AC clamp on meter suitable for measuring 0-30 mA AC as per Technical Specifications, Digital AC clamp on meter suitable for measuring 0-5 A as per Technical Specifications, Digital AC clamp on meter suitable for measuring AC and DC current 0-400A as per Technical Specifications, Digital AC clamp on meter suitable for measuring leakage current 0-2A, 20A DC as per Technical Specifications

High End Desktop Computer (Q2)

Fabrication and Supply of waterproof plywood Insulator box along with Locking arrangement. As per SCR HQ Drg No: E/252/TRD/HQ/WIB//OHE/2022-23 Dt.28.12.2022. Note: Sample Insulator box should be sent

MAYSONA 3 - seater Sofa Set with Two Single-Seater Units Secondary Unit Brand: MAYSONA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687759463051 dt.23/07/2026)

IC-II overhauling kit for HP Disc valve of TRC 1000 MN/ UG compressor of M/s Elgi make. Each set consists of 3 items. 1. Sl. No.19 Part No: 000424350, Suction Valve Spring, Qty/Set -- 02 Nos 2. Sl. No. 4 Part No: 000524070, Packing for 60mm Dia Disc valve (Small) , Qty/Set -- 01 No. 3. Sl. No. 3 Part No: 000524060, Packing for 60mm Dia Disc valve (Big), Qty/Set -- 02 Nos.

Modified Sun visor assembly complete unit as per CLW drawing No.05/1/35/149, Alt-7 or latest.

Set of Manganese liners for Bogie and Axle Box as per the details given below: S.No. Description Qty./Set 1. Horn & Axle Box Side Liner as per RDSO Drg.No. SKVL 057 Alt.1 48 Nos 2. Horn & Axle Box Face Liner as per RDSO Drg.No.SKVL 058 Alt.1 48 Nos

Modified foot step assembly RH and LH with foot plates assembly for WAG9 Locos. Drg No. C/ELS/LGD/B.F/245/Alt.-3. Set consists of 8 items. 1) Foot step RH assembly=01 no. 2) Foot step LH assembly=01 no. 3) Foot plate assembly =02 no. 4) Support bit=06 Nos. 5) Support bit=08 Nos. 6) Hex. Head bolt M16x35=14 Nos 7) Flat washer=14 Nos. 8) Spring washer=14 Nos.

Set of Bearing stoppers Pinion end & Commutator end (PE & CE) for Traction Motor type HS 15250A as per CLW Specification No.4TMS.095.001 Rev-1, Alt-2 or latest and 4TMS.095.003 Rev-1, Alt-3 or latest. Each set consisting of 5 items as given below: 1. Inner Bearing Stopper (CE) Drg No.10T 806 919 Rev-2 or latest, Qty/Set 2 Nos. 2. Inner Bearing Stopper (PE) Drg No.10T 806 918, Alt-6 or latest, Qty/Set 2 Nos. 3. Outer Bearing Stopper (CE) Drg No.10S 778 663, Alt-F or latest, Qty/Set 1 No. 4. Inner Bearing Cover for (CE) Drg No.10Q 750 259, Alt-I or latest, Qty/Set 2 Nos. 5. Inner Bearing Cover for (PE) Drg No.10Q 750 258, Alt-7or latest, Qty/Set 2 Nos

Wiper Motor Complete 1LH/1RH as CLW Specification CLW/MS/3/050 Alt-6 or latest and CLW drawing.No.1209-07-303-019.

Horn valve as per CLW drawing No.1209-18-306-219 or latest.