Loading
Loading…
Loading…
144 results • Latest
Gentian Blue Enamel Paint (RAL 5010) as per RDSO Spec. IS: 8662/2004 (Second Revision) with additional requirement of ICF/MD/SPEC-045 Issue Status-02, Rev. NO. 3 along with RDSO amendment No. 01 (Revision-0) for Pigment content.
Switch pressure along with probe
Knifing Stopper (70% Apricoat Yellow, colour code RAL 0708040 & 30% White) to IS:5083/2023 with RDSO amndt. No.1A as an additional requirement along with additional requirements stipulated in ICF/MD/Spec. 045, issue status 02, Rev. 03 dated 14-06-2007. It must be compatible with exterior paint to IS:8662/04. packed in 20/25 Kgs. capacity new and sound non-returnable M.S. Drum to IS:2552/1989 with Amdt. No. 1, Grade B-1
Worn Wheel Profile Gauge for checking the wheel profile of BG Wagon along with calibration certificate, made up of hard steel, profile made from wire cut EDM ,Intermediate Worn Wheel Profile Gauge Size 32 mm -02 Nos as per Drg. No. SKDL- 2561 as per Anexure- A
Paint enamel synthetic exterior finishing black for railway coaches to IS : 8662/2024, RDSO amndt No. I (Rev. 0) for pigment content as an additional requirement to IS: 8662-2004 w.e.f. 01.08.2016 along with additional requirements of ICF/MD/SPEC-045 issue status: 02, Rev. no. 03, dated 14.06.2007 and RDSO s amndt. no. 1B Rev. 2.0 as an additional requirement, packed in 20 Ltrs. new and sound non-returnable M.S. drum to IS:2552/89 with amndt. 1 of April 1999, Grade B-1.
3 kVAR METALLIZED POLYPROPYLENE GAS-FILLED, WAVY CUT, THREE-PHASE, SELF- HEALING TYPE CAPACITORS RATED AT 480V, 50 Hz. CAPACITOR SHOULD HAVE DISCHARGE RESISTOR AND OVERPRESSURE DISCONNECTION. CONFORMING TO RDSO MODIFICATION SHEET NO. RDSO/PE/MS/AC/0054-2011 (REV-1), AND IS:13340 WITH ISI MARK, AND HAVING PROPERTIES AS DEFINED IN TABLE-1 OF RDSO MODIFICATION SHEET NO. RDSO/PE/MS/AC/0054-2011 (REV-1). SUITABLE FOR USE IN CAPACITOR BANKS OF LHB AC COACHES & POWER CAR. THE FIRM SHALL SUBMIT COMPLETE TYPE TEST REPORT FOR CAPACITY OF 3KVAR OR HIGHER AS PER IS 13340 ALONG WITH LATEST ISI CERTIFICATION WITH PRIOR APPROVAL OF RDSO. ACCEPTED MAKE: M/S EPCOS, M/S VISHAY OR ANY OTHER MAKE WITH PRIPOR APPROVAL OF RDSO. Note:-THE LENGTH OF THE 3-PHASE E-BEAM CABLE CONNECTED TO THE CAPACITOR SHOULD BE AT LEAST 1 METER.