Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹99.0 L
EMD Value
₹2.0 L
Closing Date
22 Dec 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
LC
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Definition of Similar Work :- Any Civil Engineering works (excluding track works / zonal works)
18 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-) 15% (minus Fifteen percent) on CPWD DSR rates Tenderer should note this before quoting the rates
All the instructions furnished in the Technical Compliance/ Commercial Compliance/ Custom/ Undertakings/General Instructions/Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC/Tender documents for complete details
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/NED Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
Provision of improved facilities to manned LCs in Sr.DEN/W/NED section.
T-202526-3-087~SCR
T-202526-3-087
Open
Works - General
6 Months
Nanded, Maharashtra
₹0
₹2.0 L
22 Dec 2025
27 Nov 2025
8 Dec 2025
27 items across 2 schedules · ₹1,10,56,620.18 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 145.97 | 177.5 | 25,909.68 |
| 2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 21.89 | 7,178.75 | 1,57,142.84 |
| 3 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 21.89 | 9,045.75 | 1,98,011.47 |
| 4 | Foundations, footings, bases of columns, etc. mass concrete | for Sqm | 43.79 | 392.15 | 17,172.25 |
| 5 | Thermo-Mechanically Treated bars of grade 500D or more. | Fe- Kg | 656.88 | 107.85 | 70,844.51 |
| 6 | Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal dismantled material up to a lead of 1kilometre, per direction of Engineer-in-charge. | cum of as | 97.5 | 420.8 | 41,028 |
| 7 | On W.B.M. @ 0.75 Kg / sqm | Sqm | 4030 | 60.5 | 2,43,815 |
| 8 | On bituminous surface @ 0.50 Kg / sqm | Sqm | 3120 | 48.2 | 1,50,384 |
| 9 | 2.5 cm premix carpet surfacing with 3 cum stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS : 8887, using 96 kg per cum of chippings of road surface, including consolidation with road roller complete . | of Sqm etc | 3120 | 252.15 | 7,86,708 |
| 10 | For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. | Sqm | 201.5 | 505.65 | 1,01,888.48 |
| 11 | New work (Two or more coats) | Sqm | 109.2 | 288.9 | 31,547.88 |
| 12 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylonitrile ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer charge. The glow stud shall support a load 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be (+/-5) degress to base .The reflective panels both sides with at least 12 cm of reflective area up each side. The luminance intensity should as per the specification and shall be tested described in ASTM I: 809 as recommended in 873 part 4 : 1973. The studs shall be fixed to Road surface using the adhesive conforming to as per procedure recommended by manufacturer complete and as per direction Engineer-in-charge. | Each in of 35 on be as BS: the IS, the of | 572 | 206.3 | 1,18,003.6 |
| 13 | 25 mm compacted thickness with bitumen grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. | of Sqm | 4030 | 277.7 | 11,19,131 |
| 14 | 40/50 mm compacted thickness with bitumen grade VG-30 @ 5.5% (percentage by weight total mix) and lime filler @ 3% (percentage weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. | of cum of by | 156 | 12,126.2 | 18,91,687.2 |
| 15 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm by on as | 780 | 747.8 | 5,83,284 |
| 16 | With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 | cum | 713.44 | 2,784 | 19,86,216.96 |
| 17 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 145.97 | 1,091.5 | 1,59,326.26 |
| Schedule total | ₹76,82,101.13 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .