Construction of all civil and electrical and mechnical works at jalkur paumping

Supply and installation of Domestic and Bulk tamper proof water meters as per standard confirming to IS:779:1994/IS:2373-1981/ISO: 4064 with EEC/MID certification mark shall be with protection class of IP68 and with 2 years warranty anywhere in Uttarakhand

Design & Construction of following size of pump house considering all local safety features including supply of all materials, labour T&P, cable trenches, pannel & pump foundation etc complete as per type design. At MPS / IPS 1 / IPS 2 (8 x 7.0 x 5.0) mtr.

HT ROOMS Construction of HT rooms at all pumping stations 4 units

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, and royalties etc.

Random Rubble Dry Stone Masonry etc. including supply of all material, and royalties etc.

Treatment Works

Design and Supply of all materials, labour T & P etc. and equipments to construct 1.92 MLD capacity (for 16 hours operation per day) Rapid Sand Gavity filteration plant consisting of all required arrangement viz inlet chamber, clarifloculator, settling tank, filteration unit of 1.92 MLD each of specified gravel bed media with wash water trough, wash water storage back wash arrangement and scour & under drainage system and chemical solution tank & appropriates valves etc all complete,all the units of WTP Shall be connected minimum 1.0 mt. wide R.C.C. approch path with railing on both sides considering local safety features including cartage of all materials, labour, T & p etc. as per CPHEEO guidelines required for proper completion of work.all Supply of all materials, labour, T&P and construction of R.C.C. pre settling tank as per design and drawing complete-18.5x5.5x3.2 M

Chemical Store SIZE 3.00X2.50X1.50 Mtr

Supply of all material, labour, T&P and construction of flocculator unit as per drawing & design . (11.2x6x1) M 2 Units

Supply of all materials, labour, T&P and construction of R.C.C. Post settling tank as per design and drawing complete (7x7x5.05) M

Supply of all material, labour, T&P and construct Rapid gravity sand filter as per drawiing & design . 3 units of (3.2x2.5) M

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, and royalties etc.

Random Rubble Dry Stone Masonry etc. including supply of all material, and royalties etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Staff Quarter

Design and Construction of staff quarter of type - I plinth area (43 sqm) made up of brick masonry with R.C.C. flat roof at each pumping station and Top CWR's with other appurtenant works considering all local safety features including supply of all materials, labour, T&P, etc. complete for proper completion of work including cartage of material at various sites.

Sump cum CWR at pumping stations all complete

Design and Construction of following R.C.C. M 25 grade semi sunk circular service water reservoirs as per latest IS codes of following capacity and other appurtenant works including supply of all materials, labour and T&P etc. with all necessary scaffolding, shuttering and other accessories alongwith construction of valve chambers, supply and fixing of inlet and outlet pipes, lightining conductor, water level indicator, bye pass connections with chambers & M.S. Manhole cover with locking arrengment including supply and fixing of M.S. Steel Ladder of 65 mm x 65 mm x 5 mm angle outside and inside the tank ( For tanks 20 KL capacity or more) and colour washing of approved apex or other exterior high class paint, on the tank, manhole SS mosquito wire mesh over expanded metal mesh including supply of all materials, labour, T&P etc. complete required for proper completion of work or as per direction of engineer incharge of work. The reservoirs shall be checked for water tightness i.e for leakage, seepage in the tank and before making the final payment to contractor. 1) At MPS-350 Kl

2) At IPS-1-150 Kl

3) At IPS-2-300 Kl

4) BSKD_CWR-200 K

INJECTING DOSER and FLOW METER

Supply, Installation, Testing and Commissioning of Microprocessor based chemical dosing system suitable for providing automatically variable controlled dose of chemical to maintain required PPM of chemical with required accessories and 200 litres tank, wall mounting suitable for delivery up to 8 litters of chemical solution /sodium Hypo chloride solution per hours under maximum delivery pressure up to 5 kg/cm2 and Suction lift not less than 1.5 meter with accessories (i.e. Valve, Nozzle,200 litres PVC Tank etc complete)

Supply, installation, testing and commissioning of full bore Electromagnetic flow meter for lines of following sizes comprising of flow tube sensor with transmitter cum Display unit & facility to provide data communication signal over Modbus 485 port, pulse output & 4-20 mA signal output with flanges, clamps etc 150 mm

LAYING OF RISING MAIN

Earth work in Excavation in all type of soil for pipe line trenches including lift 1.5 M and lead up to 30 M with backfilling , watering, ramming of excavated earth in the trenches Total Excavation

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of API-X42 Pipes grade Yst 290, Jointing by electric welding process with proper grade of electrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line including testing of pipe samples etc complete. From INTAKE WELL to SETTLING TANK 168.3 mm OD, 2.1 mm (150 mm dia. 2.1 mm thickness)

From MPS to IPS_1 168.3 mm OD, 5.2 mm (150 mm dia. 5.2 mm thickness)

From IPS_1 to IPS_2 168.3 mm OD, 4.8 mm (150 mm dia. 4.8 mm thickness)

From IPS_2 to CWR_BSKD 141.3 mm OD, 3.2 mm (125 mm dia. 3.2 mm thickness)

Painting of API pipe with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) (Dia of pipe in mm)

VALVES & VALVE CHAMBERS (Rising Main )

Supply and Fixing of following sizes of sluice valves, lowering them into trenches and fixing the same on water supply line including cost of valves, specials labour T&P complete in all respect but excluding the cost of excavation and chamber. Non Rising (P.N 1.0) D.I. Sluice/ Gate Valve (150mm) PN 1,0

D.I. Non Return Valve (150mm) PN 1.0

D.I. Scour Valve 150 mm dia. PN 1.0

Cast steel D/F Sluice Valves at pumping stations of 150 mm, of Class 600

Cast steel, Non Return Valves of 150 mm of Class 600

Cast steel, Scour valve of 150 mm of Class 600

Cast steel Sluice Valves at pumping stations of 125 mm, of Class 600

Cast steel Non Return Valves at pumping stations of 125 mm, of Class 600

Cast steel, Scour valve of 125 mm of Class 600

Constructing masonry Chamber for sluice valve (900x900) mm with a floating coat of neat cement complete as per standard design :With F.P.S. bricks

THRUST BLOCK, Bridle PATH AND APPROACH ROAD

Supply of all materials, labour, T & P etc. and Construction of R.C.C Thrust Block @ 100 m interval as per type design complete

Making 2 M wide Bridle path for rising main including hill side cutting and coolie walling of all materials, labour, T & P etc.

Construction of 3.75 M wide approach road, Un-reinforced , Cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type PCC Grade M-30, Coarse and fine aggregate conforming to IS: 383, (Restoration of Road for pipe laying work). maximum size od coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges. steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes , compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

CARTAGE Cartage of pipe and special, cement and steel from Rail Head to site of work and local cartage complete for works related to production of water.

BOUNDARY WALL AND GATE Supply of all materials, labour T&P etc. for construction of Staff quarter, boundary wall and gate as per departmental type design at water works required for proper completion of work.

3.6 M wide gate

Feeder Main

Earth work in Excavation in all type of soil for pipe line trenches including lift 1.5 M and lead up to 30 M with backfilling , watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting , laying & jointing fixing and testing of G.I screwed pipe with specials in trenches (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (Medium quality) in trenches with cutting, threading including testing of pipe samples etc complete. G.I. Pipe as per IS 1239 'Medium Class' (Class B) 1) 25 mm dia

2) 32 mm dia

3) 40 mm dia

4) 50 mm dia

5) 65 mm dia

Valves and Chambers

Constructing masonry Chamber for sluice valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks (450x450)

SITC of Bulk water meter , Iron body steel cap Bulk water meter 50 mm

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, and royalties etc. for pipe line works.

Clear Water Reservoir

For Small CWRs in Rural Areas Supply of all materials, labour, T&P etc and construction of R.C.C. CWR (M-20) of following capacities ( in kilolitres ) withM.S. ladder outside & inside of the tank,M.S.M.H. cover with locking arrangement, supply and fixing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder ,M.S.M.H. cover, with steel shuttering etc. complete with approved water proofing (apex) enamel paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MTM2.The Cost of CWRs of corresponding capacities has been given in Rupees 1) 4 KL

Supply of FRP coated MS Bucket type Chlorinator of 25 litres capacity with chlorination arrangements.

Boundary wall and Gate

Supply of all materials, labour T&P etc. for construction of boundary wall as per departmental type design at water works required for proper completion of work.

Supply and fixing of 3.60 m wide main gate & 1.20 m wide wicket gate including construction of pillars as per departmental type design including supply of all materials, labour, T&P etc. required for proper completion of works.

Distribution Network & Related Components

Dismantling of Cement Concrete Pavements as per Technical Specification Clause 202 for pipe laying work. Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 m, stacking serviceable and unserviceable materials separately.

Construction of Un-reinforced , Cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type PCC Grade M-30, Coarse and fine aggregate conforming to IS: 383, (Restoration of Road for pipe laying work). maximum size od coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges. steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes , compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Earth work in Excavation in all type of soil for pipe line trenches including lift 1.5 M and lead up to 30 M with backfilling , watering, ramming of excavated earth in the trenches.disposal of surplus earth as per direction of site incharge .

Providing of all materials, Carting , laying & jointing fixing and testing of G.I screwed pipe with specials in trenches (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (Medium quality) in trenches with cutting, threading including, testing of pipe samples etc complete. G.I. Pipe as per IS 1239 'Medium Class' (Class B) 1) 15 mm dia

2) 20 mm dia

3) 25 mm dia

4) 32 mm dia

5) 40 mm dia

6) 50 mm dia

7) 65 mm dia

8) 80 mm dia

Valves & Valve Chambers (Distribution network)

2) 25mm dia

3) 32mm dia

4) 40mm dia

5) 50mm dia

6) 65mm dia

7) 80mm dia

Constructing masonry Chamber for sluice valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks (600x600)

Constructing masonry Chamber for sluice valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks (450x450)

Constructing masonry Chamber for Air valve with a floating coat of neat cement complete as per standard design : With F.P.S. bricks (450x450)

Constructing BPT as per type design complete

SITC of Bulk water meter , Iron body steel cap Bulk water meter including all labour T&P etc. complete. 50 mm

Protection work Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, and royalties etc. for pipe line works.

House Connections

Providing and making house service connections from water supply distribution GI pipe line up to water meter chamber inside the property using GI pipe up to 7 mtr length including supply and fixing of electrofusion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works. 15 mm

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.G.I. PIPE CONFORMING TO IS : 1239 (PART-1) Medium class (Class 'B'). (It will be used for those houses which are located beyond 7 meter from taping point) Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.

E&M Works at Pumping Stations

Intake well

supply of Pump with coupling and coupling guard, discharge capacity 600 LPM, Head 20 mtr. RPM 2900

Motor suitable for above pump set.

supply of Control Panel sutaible for above pumping plant

Star Delta type starter complete with accessories suitable.

Supply of copper condustor flat submersible cable 16 mm2 , 3 core 1100 volts as per IS 694.

1x3.5x50 mm2 aluminium armoured cable of 1.1 KV grade for power connection.

Supply of M.S channel fabricated heavy duty base frame suitable for pumping plant

Main piping and valve with all accessories i.e sluice valve 3 Nos . Non return valve 3 No, Tee, bend D/F pipes etc.complete.

Supply of Pressure guage 100 mm dial, size of 0-100 Kg /cm2

Jointing material

100 amp main switch

Earthing

Chain pulley block of 1 Tone capacity 25.00 Mtr. Lift

Rubber insulation sheet 1 Mt. x 2 Mtr

Installation, Commission of pumping plant and all accessories.

Tesing at manufacture works

Testing at site

supply of Centrifugal pump with discharge capacity 600 LPM, Head 530 mtr. RPM 2900 with the following specifications:- Suction casing materials - CI, Casing - WCB, Stage casing- CI, Impeller- Bronze, Shaft & Sleeve - SS-410. Including supply of pin bush type coupling and coupling guard and M.S channel fabricated heavy duty base frame suitable for pump and motor i/c foundation bolt.

Supply of 3 Phase squirrel cage induction motor IE3-IS 12615-2011, voltage 415.0, +- 10% protection type IP - 55, TEFC, 2900 RPM, 3 phase AC Electric.

Supply of ATS Starter complete

Control Panel

70mm2 Cu. conductor 3 core flat submersible cable (Double Run)of 1.1 KV grade.

300 mm2 Al. conductor 3.5 core armored cable of 1.1 KV grade .

Jointing material

Earting complete

630 AMP main switch

MAIN PUMPING AND VALVES

a. Cl SluiceValves PN 1.0 on suction side (3 set) b. Cast Steel SluiceValves, class 600 (3 set) c. Cast Steel non return Valves, class 600 on delivery side.(3set) d. Fixing of above valves including making Tee, Band, Reducer & enlarge by welding for suction and delivery site both as per requirement of side and piping condtion, including pipe, labour, material, T&P etc. complete in all respect..

Gauges

HOT Crane 3 tone with 8.0 lift

Supply of Pressure guage 100 mm dial, size of 0-100 Kg /cm2

Tools

Rubber insulation sheet (1Mtr. x 2Mtr.)

Erection of Pumping Plant

Installation, Commission of pumping plant and all accessories.

Tesing at manufacture works

Testing at site

Supply of Centrifugal pump with discharge capacity 500 LPM, Head 430 mtr. RPM 2900 with the following specifications:- Suction casing materials - CI, Casing - WCB, Stage casing- CI, Impeller- Bronze, Shaft & Sleeve - SS-410 Including supply of pin bush type coupling and coupling guard and M.S channel fabricated heavy duty base frame suitable for pump and motor i/c foundation bolt.

Supply of 3 Phase squirrel cage induction motor IE3-IS 12615-2011, voltage 415.0, +- 10% protection type IP - 55, TEFC, 2900 RPM, 3 phase AC Electric.

Supply of ATS Starter complete

Control Panel

70mm2 Cu. conductor 3 core flat submersible cable (Double Run)of 1.1 KV grade.

400 mm2 Al. conductor 3.5 core armored cable of 1.1 KV grade .

Jointing material

Earting complete

630 AMP main switch

MAIN PUMPING AND VALVES

a. Cl SluiceValves PN 1.0 on suction side (3 No.).) b. Cast Steel SluiceValves, class 600 (3 No.) c. Cast Steel non return Valves, class 600 on delivery side (3 N0.). d. Fixing of above valves including making Tee, Band, Reducer & enlarge by welding for suction and delivery site both as per requirement of side and piping condtion, including pipe, labour, material, T&P etc. complete in all respect..

HOT Crane 3 tone with 8.0 lift

Supply of Pressure guage 100 mm dial, size of 0-100 Kg /cm2

Tools

Rubber insulation sheet (1Mtr. x 2Mtr.)

Erection of Pumping Plant

Installation, Commission of pumping plant and all accessories.

Tesing at manufacture works

Testing at site

Supply of Centrifugal pump with discharge capacity 250 LPM, Head 310 mtr. RPM 2900 with the following specifications:- Suction casing materials - CI, Casing - WCB, Stage casing- CI, Impeller- Bronze, Shaft & Sleeve - SS-410 Including supply of pin bush type coupling and coupling guard and M.S channel fabricated heavy duty base frame suitable for pump and motor i/c foundation bolt.

Supply of 3 Phase squirrel cage induction motor IE3-IS 12615-2011, voltage 415.0, +- 10% protection type IP - 55, TEFC,2900 RPM, 3 phase AC Electric.

Supply of ATS starter complete '

Control Panel

16mm2 Cu. conductor 3 core flat submersible cable (Double Run)of 1.1 KV grade.

95 mm2 Al. conductor 3.5 core armored cable of 1.1 KV grade .

Jointing material

Earting complete

160 AMP main switch

MAIN PUMPING AND VALVES

a. Cl SluiceValves PN 1.0 on suction side (3 set) b. Cast Steel SluiceValves, class 600 (3 set) c. Cast Steel non return Valves, class 600 on delivery side.(3 set) d. Fixing of above valves including making Tee, Band, Reducer & enlarge by welding for suction and delivery site both as per requirement of side and piping condtion, including pipe, labour, material, T&P etc. complete in all respect..

HOT Crane 2 tone with 4.5 lift

Supply of Pressure guage 100 mm dial, size of 0-100 Kg /cm2

Tools

Rubber insulation sheet (1Mtr. x 2Mtr.)

Erection of Pumping Plant

Installation, Commission of pumping plant and all accessories.

Tesing at manufacture works

Testing at site

Cost of internal and external electrification of pump house.

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain alongwith earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required. 2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of Piano type 5 amp switch on the existing switch board.

Supply and fixing of 3 pin 5/6 amp socket outlet on the existing switch board.

Supply and fixing of metal box of 180 mmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required.

Supply and fixing of following way S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/ RCCB/Isolator) 8 Way double door

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of bulk head light Bajaj / Philips / equivalent make

Supply and fixing of 40 W tube light complete in all respect (Bajaj / Philips / Equivalent make)

Supply and fixing of 14 watt CFL on above fitted Holder (Bajaj / Philips / Equivalent make)

Supply in fixing of 23 watt LED external lighting luminaires with mounting bracket etc. complete.

Transformers

SITC of 11 kv/400 volt of Transformer complete with mounting Accessories & Tansformar oil including carting by road loading unloading by pulling and pushing methods etc. complete for proper complete . Installation, Testing & commissioning of Transformar, providing earthling system & lightining arrest i/c supply of all material, labour T&P etc. complete. I/c S/F of LT cable sutaible for different pumping stations with all necessry arrangments etc. complete. a. For Raw water - 63 KVA

a. For MPS stage- 400 KVA

b. For IPS_1 (Bharpoor) Clear water PS- 250 KVA

c. For IPS_2 (Gairi Brahmano ki) clear water PS-100 KVA

Cost of earthing of transformers at each stage including supply of material for required no of GI earthing complete with supply of all material, labour and T&P required as per I.E rules, 4 nos. for each transformer

AT INTAKE WELL

Supply and laying of 70 mm2, Al. conductor, 3 core PVC sheathed XLPE armoured HT cable @60 M per transformer

HT Cable jointing kit Indoor type

Outdoor type

SITC of HT panel including VCB

Cost of fencing of transformers

AT MPS

Supply and laying of 95 mm2, Al. conductor, 3 core PVC sheathed XLPE armoured HT cable @60 M per transformer

HT Cable jointing kit Indoor type

Outdoor type

SITC of HT panel including VCB

Cost of fencing of transformers

AT IPS 1

Supply and laying of 70 mm2, Al. conductor, 3 core PVC sheathed XLPE armoured HT cable @60 M per transformer

HT Cable jointing kit Indoor type

Outdoor type

SITC of HT panel including VCB

Cost of fencing of transformers

AT IPS 2

Supply and laying of 70 mm2, Al. conductor, 3 core PVC sheathed XLPE armoured HT cable @60 M per transformer

HT Cable jointing kit Indoor type

Outdoor type

SITC of HT panel including VCB

Cost of fencing of transformers

Trial and Testing of Scheme for Six months period including supply of all labour, material, T&P etc. Complete.

unipro techno infrastructure pvt ltd