Construction of Kalavedika, Re-Construction of Office Building, Construction of Vahanasala and Pakasala, Providing Gravel Filling and Levelling to Sri Jagannadha Swamy Temple at Vadali (V), Mudinepalli (M), Eluru District

Sri Jagannadha Swamy Temple - Vadali (V), Mudinepalli (M) , Eluru District.

Improvements to Temple

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted Filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering , overheads & Contractors Profit, etc, complete.

f) Plain Sunshade 2'-0" wide

h) Roof Slab 125mm Thick

i) Bell Type Sunshade 2'-0" wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,and including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site importation of silpi labour, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges, sales & other taxes complete for finished item of work. (as per Silpi SSR 2024)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

b) Super structure

Brick Masonry for partition walls (115 mm thick) in CM (1:5) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and including all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi SSR 2024)

A) Second Class Variety - Upto SV

B) Second Class Variety - Above SV

b) Ornamental plastering with precast cement moulds pillars using with cement, Fine Sand Brick Bats etc incluidng cost and conveyance of all materials and all labour charges etc complete.

c) Pushpa pothikas

d) Ceiling Padmam

Ceiling Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Fabricating , supplying , erecting and fixing in position MS tubular steel trusses and roof frame work as per drawing enclosed with hot finished seamless type steel tubes conforming to IS 1161-1979 , consisting of principal rafters, struts, ties, purlins, wind barcers, cleats, holding down bolts, base please etc., complete , painted with one coat of zinc oxide including cost and conveyance of all materials to work site and all operational, incidental, lbour charges, excluding sales & other taxes etc., complete for finished item of work.

b) MS Base plate - Square 16mm thick

c) MS Foundation Bolts - 16mm dia 60mm Long

Supply and installation of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Aluminium, Zinc coating AZ150 GSM.Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all meterials and labour charges, overheads & contractors profit etc; complete per finished item of work; as per drawing and as directed by Engineer In-charge. (BM-S-W.55)

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2100mm)

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on including all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with Multi red colour granite 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and excluding seigniorage charges and all other taxes on all materials, including cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.457m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete excluding sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

Flooring with ceramic tiles 300x300 mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete excluding seigniorage charges, sales & other taxes etc., complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls to 10 cm height/risers of steps with vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & I13712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but including the cost of conveyance of all materials.

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. SS 911

Supply and Fixing of 25mm outer dia (1.60 -1.80) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit with all accessories fixing on chromium plated metallic base saddles and along with raw plugs, 32mm screws, 25mm 1,2,3,&4 way junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal boxes for switches for Light, Fan and separate plug point including all labour charges, overheads & contractors profit etc., complete. PVC Bends, PVC pipes & Junction boxes Makes: Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Supply and wiring with 2 run of 1.5 Sq.mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe with supply of 6A / 10A, 1 Way, 1 Module Modular Switch, 3 Plate Jumbo Ceiling Rose and Modular switches with cover plate and GI switch box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Cable Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi), Switch & ceiling rose Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsenenglaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (MVEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply and run of 2 of 4 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges, overheads & contractors profit, etc., complete. Makes: Finolex / RR kabel/Havells/Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi)

Supply and fixing of 2 Nos 16A/6A, 1 way, Combi Socket Modular Socket with shutter ISI Marked with indicator lamp and 2 Nos 6A / 10A, 1 Way, 1 Module, Modular Switch ISI mark on existing Modular board including earth connection and all labour charges, overheads & contractors profit etc., complete on wall. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision (Series7)/ Honeywell(Blenzepro) Seperate Modular Switch board

Supply, Transportation and Fixing of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 / as per IS 374 - 1979 and 5 Star rated Ceiling Fan / 5 Star rated Ceiling Fan with double ball bearings but without regulator including all standard accessories and all labour charges, overheads etc., complete. ELEC-5.1.2

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 23/0060 twin core twisted / Flat heavy copper cable wire.. Makes: As per list of recommended brands as category I, including overheads & contractors profit, etc, complete.

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, along with supply of batten holder/slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges, overheads & contractors profit with 9W LED bulb (for new installation).

Supply and fixing of fresh exhaust fan of light duty 250 V AC 50 Hg 300 mm size 12" 1350 RPM metallic body plastic blades wire mesh etc. including cost and conveyance of all materials and all operation incidentl labour charges overhead & contractor profit completion

Supply and fixing of 8 way SPN distribution board with IP-43 Protection (Metal Door) suitable for single phase ELCB/RCCB/DP. Isolator as incomer and 10KA.SP.MCCB's as outgoing including internal connections and labour charges for surface mounting etc complete. including overheads & contractors profit, etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) including operational and other incidental charges over head & contractor profit complete MAT-02321 & MAT-02314

a) CPVC 34.90mm OD pipe - SDR-11

b) CPVC 28.60mm OD pipe - SDR-13.5

Supply and fixing of PVC / SWR pipes and Accessories including labour charges for laying fixing and commissioning the PVC pipe including couplers / bends / tees etc any diameters including necessary fixing, fittings like bends plugs coules, junctions tees etc with solvent joint as per standerd practices complete over head & contractor profit

a) 75 mm dia PVC/SWR pipe

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.

Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings (Prince/Sudhakar/Kisan/Supreme or any other ISI Brand) as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.

Providing dadooing to walls with Supply of screen printed glazed full body porcelain wall tiles of size 300 x600 mm with any type of design texturesuch as marble finish, wooden,bamboo,stone finishes etc.,scratch less,stainfree and thickness between 6-8 mm 1stquality conforming to IS:13711,IS:13712,IS:13630 (Parts1to15) of any colour and finish in all shades and designs as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and including overheads & contractors profit complete for finished item of work.

Supply anf fixing 2 in 1 of bib cock cum health faucet with 1m long tube and wall hook,chrome finish with 7 years warranty of apprved make ISI qualtiy and approved by engineer in charge including cost and conveyance of all materials and all operational incidental labour charges and excluding sales and other taxes etc. complete for finished item of work .MAT-02262

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges, overheads & contractors profit etc., complete for small quarters.

Office Building

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Auguring and boring of poles in side for bored cast in situ RCC files for building foundations in lonee clayey soils like black cotton and ordinary soils without under reams as per ideas 2911 - 1980 as per approved desing including all operations insidental labour charges higher charges of michinary augor bore drill and shall aquipment etc., complete for all depth and for finished item of work for files including over heads and contractor profit etc., complete as per S.S.R.

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering, overheads & contractors profit etc, complete.

g) Plain Sunshade 2'-0" wide

i) Roof Slab 125mm Thick

j) Bell Type Sunshade 2'-0" wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,and including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

b) Super structure

Brick Masonry for partition walls (115 mm thick) in CM (1:5) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and including all labour charges like mixing cement mortar, lift charges, curing, overheads and contractors profit, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges , sales & other taxes complete for finished item of work. (as per Silpi SSR 2018)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges, sales & other taxes etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit (as per Silpi SSR 2024)

a) First Floor - Second Class Variety

Ceiling Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

S&F ofFullyPanneled Doors External or Internal moulded pannels SS 290 including cost of Sal wood , wrought and putup, labour charges for making, necessaryfixtures and fittings and fixing in positon etc., complete with (1000 x 2000mm) size Frame and size planks, including overheads & contractors profit etc., complete for finished item of work.

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality confirming to IS:13711,IS:13712,IS:13630 (Parts 1to 15) of any colur and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) excluding cost of seigniorage charges on all materials, including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls to 10 cm height/risers of steps with vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & I13712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water overheads & contractors profit etc., complete excluding seigniorage charges, sales & other taxes etc., complete for finished item of work, but including the cost of conveyance of all materials.

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. SS 911

Supply and Fixing of 25mm outer dia (1.60 -1.80) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit with all accessories fixing on chromium plated metallic base saddles and along with raw plugs, 32mm screws, 25mm 1,2,3,&4 way junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal boxes for switches for Light, Fan and separate plug point including all labour charges etc., complete. PVC Bends, PVC pipes & Junction boxes Makes: Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Supply and wiring with 2 run of 1.5 Sq.mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe with supply of 6A / 10A, 1 Way, 1 Module Modular Switch, 3 Plate Jumbo Ceiling Rose and Modular switches with cover plate and GI switch box including all labour charges, overheads & contractors profit, etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Cable Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi), Switch & ceiling rose Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsenenglaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (MVEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply and run of 2 of 4 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges, overheads & contractors profit etc., complete. Makes: Finolex / RR kabel/Havells/Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi)

Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges, overheads & contractors profit, etc., complete. ELEC-1.5.4

Supply and fixing of 2 Nos 16A/6A, 1 way, Combi Socket Modular Socket with shutter ISI Marked with indicator lamp and 2 Nos 6A / 10A, 1 Way, 1 Module, Modular Switch ISI mark on existing Modular board including earth connection and all labour charges, overheads & contractors profit etc., complete on wall. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/ Precision (Series7)/Honeywell(Blenzepro) Seperate Modular Switch board

Supply, Transportation and Fixing of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 / as per IS 374 - 1979 and 5 Star rated Ceiling Fan / 5 Star rated Ceiling Fan with double ball bearings but without regulator including all standard accessories and all labour charges, overheads & contractors profit etc., complete. ELEC-5.1.2

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 23/0060 twin core twisted / Flat heavy copper cable wire.. Makes: As per list of recommended brands as category I.

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, along with supply of batten holder/slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges, overheads & contractors profit with 9W LED bulb (for new installation).

Supply and fixing of 8 way SPN distribution board with IP-43 Protection (Metal Door) suitable for single phase ELCB/RCCB/DP. Isolator as incomer and 10KA.SP.MCCB's as outgoing including internal connections and labour charges for surface mounting etc complete. including overheads & contractors profit etc

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges, overheads & contractors profit etc., complete for small quarters.

Providing Sand Filling and Levelling in the Premises of Sri Jagannadha Swamy Temple

Filling with carted filling sand from approved source to work site, spreading & levelling of gravel with dozers and watering etc., including cost and conveyance of materials like gravel and water to work site and including all operational,incidental ,labour charges,hire charges of T&P etc., and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310) , but excluding seigniorage charges, sales & other taxes, etc., complete.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering, overheads & contractors profit etc, complete.

f) Plain Sunshade 2'-0" wide

h) Roof Slab 125mm Thick

i) Bell Type Sunshade 2'-0" wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. , and including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

a) Basement - allround

b) Super structure - allround

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges complete for finished item of work. (as per Silpi norms)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi norms)

a) Second Class Variety - First Floor

Ceiling Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

S&F ofFullyPanneled Doors External or Internal moulded pannels SS 290 including cost of Sal wood , wrought and putup, labour charges for making, necessaryfixtures and fittings and fixing in positon etc., complete with 1000x2000 mm size Frame and size planks, including overheads & contractors profit etc, complete

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.457m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete excluding, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

Providing skirting to internal walls to 15 cm height/risers of steps with 25 mm thick polished Shahabad stone length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, sales & other taxes but including overheads & contractors profit etc, complete.

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. SS 911

Supply and Fixing of 25mm outer dia (1.60 -1.80) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit with all accessories fixing on chromium plated metallic base saddles and along with raw plugs, 32mm screws, 25mm 1,2,3,&4 way junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal boxes for switches for Light, Fan and separate plug point including all labour charges etc., complete. PVC Bends, PVC pipes & Junction boxes Makes: Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Supply and wiring with 2 run of 1.5 Sq.mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe with supply of 6A / 10A, 1 Way, 1 Module Modular Switch, 3 Plate Jumbo Ceiling Rose and Modular switches with cover plate and GI switch box including all labour charges, overheads & contractors profit etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Cable Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi), Switch & ceiling rose Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsenenglaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (MVEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply and run of 2 of 4 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges , overheads & contractors profit, etc., complete. Makes: Finolex / RR kabel/Havells/Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi)

Supply and fixing of 2 Nos 16A/6A, 1 way, Combi Socket Modular Socket with shutter ISI Marked with indicator lamp and 2 Nos 6A / 10A, 1 Way, 1 Module, Modular Switch ISI mark on existing Modular board including earth connection and all labour charges, overheads & contractors profit etc., complete on wall. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/ Precision (Series7)/Honeywell(Blenzepro) Seperate Modular Switch board

Supply, Transportation and Fixing of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 / as per IS 374 - 1979 and 5 Star rated Ceiling Fan / 5 Star rated Ceiling Fan with double ball bearings but without regulator including all standard accessories and all labour charges, overheads & contractors profit, etc., complete. ELEC-5.1.2

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 23/0060 twin core twisted / Flat heavy copper cable wire.. Makes: As per list of recommended brands as category I.

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, along with supply of batten holder/slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges, overheads & contractors profit with 9W LED bulb (for new installation).

Supply and fixing of 4 way SPN distribution board with IP-43 Protection (Metal Door) suitable for single phase ELCB/RCCB/DP. Isolator as incomer and 10KA.SP.MCCB's as outgoing including internal connections and labour charges for surface mounting etc complete. including overheads & contractors profit etc, complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges, overheads & contractors profit etc., complete for small quarters.

Augoring and boring of holes in site for Bored Cast-in-situ Piles for building foundations in loamy clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all perations, incidental, labour charges hire charges for machinery, augure bore drill and shell equipment, etc., complete for all depth and for finished item of work for piles of following dia meters.

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operaitonal,incidental ,labour charges,hire charges of T&P etc., excluding seniorage charges, and including overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering shuttering , overheads & contractors profit etc, complete.

f) Plain Sunshade 2'-0" wide

h) Roof Slab 125mm Thick

i) Bell Type Sunshade 2'-0" wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc. ,and including overheads & contractors profit complete for finished item of work in ground floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

b) Super Structure

Ornamental brick work in C.M (1:5) using second class well burnt bricks from approved sources using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site, excluding scaffolding for construction of masonry but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, curing etc., and over heads and contractor profit and excluding seigniorage charges complete for finished item of work. (as per Silpi norms)

Ornamental plastering 25mm to 40mm thick with base plastering 12mm to 20mm in C.M (1:3) and top finishing 12mm thick with C.M (1:2) to bring the required ornamentation including fine rendering with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing ,excluding Seigniorage charges, sales & other taxes etc., complete for finished item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika. Lathalu in Uttara Eludhakam, Pothikas, Nasigudu. Pupha Puskala Adihishtanam, Wherever necessary. including over head charges and contractor profit ( as per Silpi norms)

a) Second Class Variety - First Floor

Ceiling Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and including operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

S&F ofFullyPanneled Doors External or Internal moulded pannels SS 290 including cost of Sal wood , wrought and putup, labour charges for making, necessaryfixtures and fittings and fixing in positon etc., complete with 1000x2000mm size Frame and size planks, including overheads& contractors profit, etc, complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all including operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.457m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete excluding, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

Providing skirting to internal walls to 15 cm height/risers of steps with 25 mm thick polished Shahabad stone length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water overheads & contractors profit etc., complete excluding seigniorage charges, sales & other taxes etc., complete for finished item of work,

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, excluding sales & other taxes, including incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. SS 911

Supply and Fixing of 25mm outer dia (1.60 -1.80) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit with all accessories fixing on chromium plated metallic base saddles and along with raw plugs, 32mm screws, 25mm 1,2,3,&4 way junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal boxes for switches for Light, Fan and separate plug point including all labour charges overheads & contractors profit etc., complete. PVC Bends, PVC pipes & Junction boxes Makes: Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Supply and wiring with 2 run of 1.5 Sq.mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe with supply of 6A / 10A, 1 Way, 1 Module Modular Switch, 3 Plate Jumbo Ceiling Rose and Modular switches with cover plate and GI switch box including all labour charges, overheads & contractors profit, etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Cable Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi), Switch & ceiling rose Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsenenglaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (MVEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply and run of 2 of 4 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges, overheads & contractors profit etc., complete. Makes: Finolex / RR kabel/Havells/Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi)

Supply and fixing of 2 Nos 16A/6A, 1 way, Combi Socket Modular Socket with shutter ISI Marked with indicator lamp and 2 Nos 6A / 10A, 1 Way, 1 Module, Modular Switch ISI mark on existing Modular board including earth connection and all labour charges, overheads & contractors profit etc., complete on wall. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/ Precision (Series7)/Honeywell(Blenzepro) Seperate Modular Switch board

Supply, Transportation and Fixing of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 / as per IS 374 - 1979 and 5 Star rated Ceiling Fan / 5 Star rated Ceiling Fan with double ball bearings but without regulator including all standard accessories and all labour charges overheads & contractors profit etc., complete. ELEC-5.1.2

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 23/0060 twin core twisted / Flat heavy copper cable wire.. Makes: As per list of recommended brands as category I, including overheads & contractors profit etc, complete.

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, along with supply of batten holder/slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges, overheads & contractors profit with 9W LED bulb (for new installation).

Supply and fixing of fresh exhaust fan of light duty 250 V AC 50 Hg 300 mm size 12" 1350 RPM metallic body plastic blades wire mesh etc. including cost and conveyance of all materials and all operation incidentl labour charges overhead & contractor profit completion

Supply and fixing of 4 way SPN distribution board with IP-43 Protection (Metal Door) suitable for single phase ELCB/RCCB/DP. Isolator as incomer and 10KA.SP.MCCB's as outgoing including internal connections and labour charges for surface mounting etc complete. including overheads & contractors profit etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges, overheads & contractors profit etc., complete for small quarters.