HPSEBL/TED/NIT-10/2026-27

Supply Part HT Line

Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.

Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.

Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)

Supply of MS Channel 100x50x6 mm Length (1500 mm x2 No.) Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:

Supply of MS Channel 100x50x6 mm Length (2340 mm x2 No.) Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:

Supply of GO switch unit (11kv, 400A, 25KA) Tripple pole O/D type.

Supply of D.O Fuse Unit

Supply of Half Clamp (M.S. Flat 50x5 mm)

Supply of Full Clamp (M.S. Flat 50x5 mm)