Deposit work of Blue Star Realtors Limited Shifting of EHT Tower at Loc 10 of 110kV KLBR 1 and 2 feeder with RS Type Tower

Dismantling one set tension string with conductor from Dshackle of the 66/110kV tension tower after tensioning the conductor by using special appliances after giving jumper connections, then lowering the conductor with tension string, dismantling existing tension clamp with fittings from the conductor , marking the position of the tension hardware fittings after changing the damaged portion of line conductor if any with new conductor and providing single tension hardware fittings/double tension hardware fittings(double tension hardware fittings for road crossings etc.) on the conductor using compressor, replacing damaged disc insulators ,re-assembling the insulator string to the tension hardware fittings with conductor, lifting the same, re-assembling to the existing D-shackle at the cross arm and giving necessary jumper connections etc. as per the direction of departmental staff. Special tools if available will be supplied at free of cost.

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof over 10km for Tower extensions and other structures and all other materials including earthing materials

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Line and EarthConductor

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Line and EarthConductor

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof above 10km, for Line and Earth Conductor

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km andupto 10km for Insulators and accessories, power conductor accessories and earth conductor accessories etc

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part there of over 10km, for Insulators and accessories, power conductor accessories and earth conductor accessories etc

Dismantling the droppers and connection from lines / equipments or jumper between two buses without suspension insulators using ACSR Moose/ Kundah/ wolf Single conductor at both ends with compressed/ bolted ends, (for one phase) including transportation of materials to the stockyard from the site with an initial lead of 50m under the supervision and direction of department staff at site.

Stub setting (using template/probe) for 110 kV towers. Erection of stub, stub template, fixing of jack for supporting template, allignment and leveling for exact location of stubs of stub setting template, dismantling of template after completion of initial curing of Cement concrete, movement of template from one location to another complete, as directed by Board staff. - general area (For 220 kV DC Towers (Genral) Wt of 220 kV/ Wt of 110 kV DC(.817/.533)xa1)

Erection of tower super structure above ground level including erection of normal and special hill side extension members wherever necessary, providing tower accessories like phase, danger and number plates, bird guards, anti climbing devices, including tighting ,punching and tack welding upto bottom cross arm in the bolt and nut after punching and applying zink rich primer wherever necessary etc. complete, as directed by Board staff (220 kV DC Tower ((a1) x 1.51) Average height 33.2m s) general area