Providing PWS Scheme in Mallampudi Panchayat in Bantumilli Mandal Est Cost Rs:35.00 Lakhs

Supply and delivery of 110mm dia HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt.

Construction of Drinking Water Supply with 110mm dia H.D.P.E Pipelines for the following sizes as per IS 4986/1988 with its amendments and revisions including supply of pipes, necessary specials such as bends, tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation Earthwork excavation in all soils upto SDR using total 1/3 rd manual and 2/3 rd machinery labour for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro testing to the required pressure etc., complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges and all taxes, duties and levies for finished item of pipeline work, but excluding taxes. 110mm dia HDPE 6 kg/cm2

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH-1mattu-1st mattu

Filling the Foundation with sand including cost,conveyance ,watering and ramming etc complete.

CC(1:4:8)using 40 mm HBG metal icluding Cost and conveyance of the all materials etc complete.

M30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for bottom raft

M30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for sidewalls

M30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Top slab with 0.1 thickness

Accoproof plastering with CM(1:5),12mm thick including cost and conveyance of all the materials ect complete.

Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc complete.

Supply Installation Testing And commissioning of CPCB IV+ DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator 1. 1500 RPM, 1P or 3P, Brushless type, screen protected, revolving field, Self-excited alternator conforming to IS/IEC 60034-1 IP23, with standard Alternator Protection (over voltage, over speed & Under voltage) 2. A reliable long life with superior class 'H' insulation with temperature rise to Class H Diesel Engine: Engine: Engine should comprise of Silencer, Electronic governor from >25 KVA & above, suitable rating battery , Battery charging alternator, battery charger , Inbuilt Fuel tank with fuel pipe, AVM pads , Control panel with 3P MCCB of suitable rating with short circuit protections ( 25kA,36kA, 50kA) with microprocessor based controller indicating genset parameters ( i.e. volt, amps, KWH, KVAR, Hrs etc.), The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied as per OEM specifications and shall be tested at site along with below. 1. CRDI Engine >25 KVA DG set 2. Water cooled Radiator coupled to engine 3. Dry type air cleaner with service indicator 4. First fill of lube oil, Coolant & first fill of Diesel 5. Electrical starter motor with soft start System 6. Battery charging alternator 7. Remote Monitor system >58.5 KVA & Above 8. 2 years / 5000 Hrs Warranty from commissioning or 30-month form supply.9. Emission control system - EGR & (DOC, SCR for >75 KVA DG set) 10.10 Mtrs Exhaust pipe from Silencer Genset Controller: 1. Microprocessor based genset monitoring, metering and control system with full graphics LCD display for easy front panel access. 2. AMF relay, manual and remote start / stop modes for 1-ph & 3-ph gensets 3. Backlit and full graphics display with power saving feature 4. Engine parameter monitoring -Lube oil pressure, Engine coolant temperature, Fuel level, Battery voltage, Engine running hours 5. AC Alternator parameter monitoring -Voltage L-N & L_L, Current, kW, kVA (Phase & Total), Frequency, kWH, PF 6. Genset Protection: Engine: Low lube oil pressure, High coolant temperature, Battery High/Low Volts, Fail to Start, Sensor failure, Low fuel level, Overspeed AC Alternator: Over/Under Voltage, Over/Under, Frequency, Loss of AC sensing, Over frequency, Over Current, kW Overload, Unbalancing load 7. Maintenance notification based on Engine Run Hour & due date 8.Communication: USB port, RS485, CAN 9.30-50 Event logsAcoustic Enclosure: 1. Specially designed to meet stringent MOEF/CPCB IV+ norms 2. Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.2 mm / 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.2mm /1.6 mm CRCA sheet and filled with PU Foam/Rockwood for Fire retardant acoustic and for better safety 3. Designed to operate in extreme climatic conditions in temperatures ranging from -10 deg to 55 deg without any external aid 4. Fabricated base frame with AVM pads. 5. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB58.5kVA at 0.8 pf 415V 50Hz 3-Ø