SPECIAL REPAIR/RENOVATION OF 21 UNIT OF STAFF QUARTERS AND OTHER MISC WORK TO KVS AFS AT AF STATION NALIYA

Amount

Dismantling of bricks tiles or terracing tiles of any thickness single layer on roofs laid bedded and pointed in any mortar and removing the debris outside the defence land complete all as specified

Taking down existing bitumen felt including cement mortar bedding including padding cleaning the surface and removal outside the MOD land complete all as specified and directed.

M&L for Plain Cement concrete tiles 20cmx20cmx 20mm thick,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished including 15mm thick screed bed in cement mortar (1:6) with grey cement and pigment complete all as specified and directed.

M&L for Refixing old concrete tiles 20cmx20cmx 20mm thick,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished including 15mm thick screed bed in cement mortar (1:6) with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) laid on roof in adequate slope complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in cement mortar 1:3 on roof slab/canopies/chajjas with water proofing compound @3% by weight of cement or as per manufacture's instruction and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note:- water proofing compound will be measured and paid for separetaly as under relevant item)

Supply only integral water proofing compound all as specified.

M&L for preparing, clean and dried plastered roof surfaces and applying APP modified water proofing membrane with non woven polyster reinforcement/ mat not less than 3mm thick having weight not less than 3.5 kg/sqm over a coat of bituminous filler/ primer @ 250 gm/sqm conforming to IS 3384-1986 through approved applicator and applying bitumenious aluminium paint @ 100gm/sqm on top of APP membrane all as per manufacturer's instructions complete all as specified and directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

M&L for cutting out cracks to 'V' section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landings, chajjas, and similar suspended work. including necessary scafolding complete all as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheets 0.50mm thick of any color having tensile stregth of 550 Mpa fixed with screws with angle iron frame work complete all as specified and as directed by Engr-In-Charge

M&L for RCC (1:2:4) type B1 (nominal mix), using 20mm graded stone aggregate for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC (1 :2 :4) Type B0 ( 12.5 mm graded aggregate) as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edge. In lintels upto 1.5m clear span, cills steps seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings kneelers, apex stones, bet plates

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, lintels shelves including suports etc. complete all as specified and directed.

Dismantling wroght iron or mild steel work of any description and in any position complete all as specified and directed.

S & F mild steel TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending sipirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for welding with specified weld size as per drawing & relevent IS code on reinforcing bars (Generally lap joint) / Structural steel etc complete including all materials, labour etc complete including all materials, labour etc. for all heights, location, shape & size as directed by Engr-in-Charge.(Actual weld length shall be measured for payment) weight n.exc 4 kg per sqm

Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed

M&L for rendering 5mm thick cement plaster in cement mortar (1:2) on fair faces of concrete as in soffit, ceiling of slab/ chajjas, finished even & smooth without using extra cement complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces of wall complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in two layers, (10 mm thick backing coat in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4)) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement, using water proofing compound @ 3% by weight of cement in finishing coat or as per manufacturer's instructions complete all as specified and directed. (Note:- water proofing compound will be measured and paid for separetaly under relevant item)

M&L for preparation of new plastered surfaces of ceilings and applying plaster of paris putty of 1 mm thickness over plastered surface of ceiling to prepare the surface even and smooth after applying two coat of Oil Bound Destemeper emulsion complete all as specified and directed

M&L for complete removal for existing treatment and applying plaster of paris putty of 1 mm thickness over plastered surface of ceiling to prepare the old plastered/unplastered surface of ceiling even and smooth preparation of and applying two coat of Oil Bound Destemeper emulsion complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of acrylic based paint (Exterior emulsion paint) over a coat of primer complete all as specified and directed. (in approved camouflaged pattern as directed)

M&L for complete removal of old surface and preparing old plastered or unplastered surfaces of walls and Ceiling applying two coat of 100% acrylic anti fungal paint ( in approved camouflaged pattern as directed) on complete specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bond distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats of oil bond distemper over a coat of with alkali resistant priming paint complete all as specified and directed

Taking down of chowkats or frames not exc 1.5sqm with shutters (with out taking off shutters from the frames).

Taking down of chowkats or frames exc 1.5sqm but n exc 4 sqm with shutters (with out taking off shutters from the frames).

Taking down shutter of any description n. exc. 1 Sqm each

All as per item No. 32 above, but exc. 1 Sqm but n. exc. 2 Sqm each

Resecuring or Refixing easing and adjusting wooden door/window, without taking down shutters of any description exc 1sqm but not exc.4sqm each complete all as specified and directed.

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick(stiles),with 2, 4,or 6raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F IInd class HW solid, straight chowkats and frames, rought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M & L for preparing surfaces of wood and wood based materials, and treating back of chowkats etc area exc 0.1 sqm but n exc 0.5 sqm each with tar or coal tar black paint

S & F mild steel hold fast etc conforming to Fe-290 Gde-E-165 all as per specified and as directed by Engineer in charge. Note:- The item includes cutting holes in brick wall/ concrete block wall for inserting hold fast etc. built in CM of depth exc. half brick/ concrete block wall and n. exc. one brick/ concrete block wall making good in CM (1:3) or PCC (1:2:4) type B0 as specified.

M&L for cement concrete type C1 1:3:6 (20mm graded aggregate) for hold fasts complete all as specified.

S & F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S & F 35mm thick 2nd class HW glazed and Skelton shutter open rebated and prepared to receive glass, gauzed etc edges of framing plain chamfered fitted wtih cut and mitred beads for securing wire mesh.

M&L for preparation of new or previously untreated wooden surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails.

S & F continuous (piano) hinges, mild steel, 30 mm width flaps (when open), bright finish or electro galvanized (ISI Marked).

M&L for 19/20 mm thick block boards, grade 2 quality, interior grade,commercial type (ISI marked) fixed with screws to timber frame work fixed in repairs.

S&F in repair for 25 mm thick flush shutters, solid core commercial construction with block board core and plywood face panels, commercial type one face is covered with decorative face veneer with lipping/frame to match

S & F 12mm thick prelaminated particle board prelaminated both sides with decorative choice lamination and fixing in same position from aluminium partition very carefully including replacement of defective aluminium beading cleat if required complete all as specified and directed.

S&F 100 mm size hasp and staple, aluminium anodised type, stove enamelled black including bolt to hinges plate and fixed with screws.

S&F stainless steel butt hinges,medium weight,size 100mm with ISI mark.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised.

S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section.

S&F in repair 150 mm aluminium anodised, barrel tower bolts of extruded section.

S & F 250mm aluminium anodised sliding door boolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed.

S & F in repairs 250mm aluminium anodised sliding door boolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed.

S & F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete as all as specified and as directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete as all as specified and as directed.

S & F aluminium anodised wire cloth 0.45 nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staple.

S&F in repairs aluminium anodised wire cloth 0.45 nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staple

S & F 140mm floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fised in floor.

Fixing only 140mm floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fised in floor.

S & F Anodised aluminium curtain rod of 25mm dia complete.

S & F complete Aluminium anodised brackets for curtain rod of 25mm dia fixed to wall as directed.

S&F powder coated aluminium, three track sliding window frame of size 91.08x31.75x1.2mm comprising of one No of fly proof shutter and two Nos of glazed shutter frames of size 40x18x1.2mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement with aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm complete all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint complete all as specified and directed.

S & F powder coated aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed with out sash bars, openable type (Top hung) and glazing complete with 5.5mm thick coloured/tinted sheet glass with necessary clips, hinges, aluminium (anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed..

S & F Vetirified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in coloured cement.

S & F Vetrirified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,vertical surfaces fixed in 10mm thick backing coat of cement mortar 1:4 and set and jointed in neat cement slurry and pointed in coloured cement.

S & F Non skid ceramic coloured tiles mm, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc,laid over 15mm thick screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in coloured cement.

S & F glazed ceramic Coloured tiles over vertical surface of wall,450x350x7mm thick (or nearest size), set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM(1:4) complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings not exc 150mm thickness (below or above ground level), incl chequred tiles complete all as specified and directed.

M&L for cement concrete 75mm thick 1:3:6 type C-2, (40mm graded aggregate ) as in plinth protection finishing concrete surface even and smooth with out using extra cement..

M&L for 100 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring finishing the surface even and fair without using extra cement all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-2 using 20 mm graded stone aggregate as in sub base of flooring finishing the surface even and fair without using extra cement all as specified and directed.

Demolition of precast concrete articles and precast concrete block walling, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. complete all as specified and directed. and removing the debris outside the defence land complete all as specified

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as directed.

M&L for 18-20mm thick Granite (of any type) pre-polished in cooking platforms and like fixed with neat cement slury over 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite and rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specifiedcomplete all as specified and directed.

M&L for machine cut Kota stone ( greenish colour, pre polished) slab in one piece as in cill /staircase terads flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete all as specified over & incl 20mm thick screed bed in CM 1:4 and rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified

M & L for Machine pressed precast concrete interlocking paver block any size and shape confirming to IS 15658- 2006 of 60 mm thickness, M-35 grade laid with grey cement and pigment & over 25 mm sand cushioning.

M&L for 75mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path and finishing the surface even and fair without using extra cement all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth complete all as specified and directed.

S & F 16mm outer dia pipe laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. bore of pipe complete all as specified and directed.

S & F 20 mm outer dia pipe laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. bore of pipe complete all as specified and directed.

S & F 25mm outer dia pipe laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. bore of pipe complete all as specified and directed.

S&F in repair, bib taps fancy type chromium plated, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F in repair, conceal stop /Angle valve fancy type cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed.

Supply only pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S & F stainless steel sink with drainage board 1mm thick for kitchen with plugs, washer and waste in repairs including in cement mortar to dwarf wall or including fixing cantilever brakets and connection union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

Supply only Stainless steel plate rack 0.63 mm thick of size 600x600mm complete all as specified and directed.

S & F health faucet ABS body (Mild steel chromium plate) suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified

S&F in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S&F in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall Including waste fitting and waste pipe complete all as specified and directed.

Supply only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply 32mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S & F Alluminium anodised tubular towel rail 20mm dia 'D' type 60cm long between flanges.

S & F Chromium plated shower roses125mm size with or without swivel joints, any size, including fixing to steel pipe or union

Dismantling of cast iron, PVC or reinforced concrete drain pipes of any size, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) pipe (Type 'B') single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) bend any radius for 110 mm bore pipe incl jointing material complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipe (Type 'B') single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) bend any radius for 75 mm bore pipe incl jointing material complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal for75mm dia bore incl jointing material complete all as specified and directed.

Supply only PVC water closet seat, black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for EWC complete all as specified and directed.

M&L for 75 mm PVC (SWR) floor trap/Nahani trap plain with including stainless steel grating jointing with solvent cement (1:2:4) complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm,setting and jointing with solventcement type ‘P’ complete all as specified and directed.

Dismantling water tanks of capcity exc 250 & n.exc 500 ltr and removing to store

S & F 500 litrs Rotational moulded polythylene white color tripple layer water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part I

Disconnecting existing tanks, exc 250 & n.exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

S & F 15mm dia. ball brass valves, high pressure, with polythene float and fly nut complete,screwed for iron pipe or brass ferrule and fixed.

S & F in repair 15mm dia. ball brass valves, high pressure, with polythene float and fly nut complete,screwed for iron pipe or brass ferrule and fixed.

M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and directed.

M&L for rendering 20mm thick, in cement mortar (1:3) mixed with liquid water proofing compound FOSROC'S COMPLAST 421 IC 130ml per bag of cement including a boan div coat of FOSROC nitto bond AR cement slurry for sunken slab/floor complete all as specified (liquid water proofing compound are measured separately finished even and smooth without using extra cement

Supply only liquid water proofing compound

M & L for apply evenly a tack coat of industrial bitumen 85/[email protected] per sqm including cleaning all as specified and as directed

M & L for priming surface and applying normal tratment for moderate conditions using glass fibre bas bitumen felt. Grade 2.

S&F 25 mm bore, gun metal or globe or gate valves, with iron wheel head, screwed both ends for iron pipe compledte all as specified and as directed

Taking down copper/aluminum wiring (light, fan, socket or power) complete and including (fitting and fixture such as switches, socket ,ceiling rose ,pendent ,regulators , etc to be measured separetaly) NOTE:- Job including for taking out old gutties,screw,nails etc and making good to disturbed surface of wall ,floor etc including to match with the existing surface.

M & L for point wiring for One light/Fan point controlled by one switch complete with 1.5 sqmm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl PVC ISI marked boxes of suitable size for mounting the switches , socket outlets , fan regulators etc all as specified and directed. Note: PVC Box/ Ms cocealed box with laminated sheet will be fixed on requirment of site.

All as per item No.127 above but for One Switch socket 3 pin outlet 5 amp on independent board.

All as per item No.127 above but for One light point controlled by two 2-way switches, with cable 1.5 sq mm size

All as per item No.127 above but for One 3 pin socket outlet 5 amp on the same board with other switches.

All as per item No.127 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size.

All as per item No 127 above but with 2.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor and including provision of 2.5 sq mm PVC insulated ,multistranded copper conductor as earth continuity conductor connected to commen earth

S & F switch piano flush type single pole one way 5 amp.

S & F switch piano flush type single pole two way 5 amp.

S & F ceiling rose three Phase/PVC polycarbonate, isolated body complete all as specified.

S & F switch socket combination 2 in 1, 3 pin 5/15 amp flush type. .

S & F switch socket combination 2 in 1,5 amp flush type.

S & F socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type.

S & F MCB DB, SPN, 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S & F in repair vertical type DB, double door Suitable for isolated neutral bar 4 ways,IP 43 protection, Door earthing,mechenical impact strength IK 08 insulated busbar assembly ,fixed in the wall with suitable nut and bolt including 4 pole MCCB 125 Amp 16 KA fixed in Dbs as incommer three phase supply fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall all as specified and directed.

S & F MCB DB, TPN, 4 ways double door with 415 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S & F in repair MCB, SPN, 40 amps, 240 Volts, Complete all as specified and directed.

S&F in repair MCB 6 to 32 amps, SP, 240 Volts, Complete all as specified and directed.

S&F in repair of isolator 40 amps 415 Volts, Complete all as specified and directed.

S & F switch bell push, flush type 5 Amp.

S & F bell, AC, 230 Volts single pole.

S & F LED Batten for LED tube light with 01 Nos of LED tube 18 Watt fixed on two Nos of Square Block with twin core copper flexible wire and incl taking down old type tube light fitting etc all as directed.

S&F LED plastic batten with white acrylic cover with 01 Nos LED tube 10 Watt Watt fixed on two Nos of Square Block with twin core copper flexible wire and incl taking down old type tube light fitting/holder any type etc all as directed.

M&L for repair lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified & directed.

S&F in repair LED street light fitting 15 W with pressure die cast housing along with prismatic polymer carbonate diffuser and LED with secondry optic with IP 65 protection, including provision of GI pipe light grade of suitable size bent to the shape fixed in the wall with two nos of clamps,nut,bolts,screw etc all as directed and directed.

S&F in repair fan regulator flush type on the existing phenolic laminated sheet etc as per reqd.

S&F in repair sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade including making good to disturb surface of wall and match with the existing surface.

S & F exhaust fan 300 mm size single phase 230/240 V complete with louver fixed in wall with nuts and bolts by making of suitable arrangement and making good including taking down old exhaust fan by removing all electrical cxonnection.Note :- Unserviceable Exhaust fan will be diposited at MES store Yard.

Taking down the existing ceiling fans 1200/1400mm sweep, single pole, AC 230 V 50 Hz by disconnecting electrical connection along with fan hook. Repair & reassembling the fans after resign and replacement of minor nut bolts, washers / split pins, cleaning the fan body , blades and hook including painting of ceiling fans in situ complete etc with smooth cloth and refixing the fans to ceiling testing and commissioning of fan to the entire satisfaction of Engr –in –Charge.

Taking out the defective winding for fan starter and cleaning the slots properly providing insulating sheets and supply and rewinding the fans with supper enameled copper winding and existing gauge and class varnishing the winding the winding wire and testing it for proper working for size of fan 1200mm sweep.including replacement of unserviceable parts like bearing,bush,pin,rubber rill with clamps etc all as directed.

Taking down electric meter of any type and any make single/three phase by dismantling of all electrical connection checked the meter ,and refixed same Nos of meter on wooden board of suitable size in same Nos of qtr after repair works to entire satisfaction of Engr-In-Charge.

M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.

GOPI CONSTRUCTION

Hari Construction

Vijay Construction Co