Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.8 CrAccepted-AOC | ₹1.8 Cr | 1 | Accepted-AOC AOC |
Tender Value
₹1.8 Cr
EMD Value
₹3.6 L
Closing Date
21 Oct 2022, 5:00 pmClosed
EXECUTIVE ENGINEER
OFFICE OF EXECUTIVE ENGINEER UTTARAKHAND JAL SANSTHAN NEW TEHRI
Augmentation Strengthning of Than Jardhargaon Kataldi water supply scheme under JJM
2022_UKJS_50579_1
1981/E-Tender-JJM/2022-23/90 Dtd 11.10.20200
Open Tender
Civil Works - Water Works
Item Wise
183 days
BLOCK CHAMBA
Augmentation Strengthning of Than Jardhargaon Kataldi water supply scheme under JJM
2 documents required · 2 mandatory
₹5,900
EXECUTIVE ENGINEEER UTTARAKHAND JAL SANSTHAN
₹3.6 L
NEW TEHRI
30 Sept 2023
14 Oct 2022
22 Oct 2022
14 Oct 2022
21 Oct 2022
16 Oct 2022
15 Oct 2022
Augmentataion Strengthning of Than Water Supply Scheme Under JJM
Rising Main (MSERW Pipe)
Earth work in Excavation in all type of soil for pipe line trenches including lift 1.5 M and lead up to 30 M with backfilling , watering, ramming of excavated earth in the trenches.
Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.
80 mm Dia (4.8 mm thick)
Providing of all Jointing materials,NRV Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.
Thrust Block (Anchor Block)
Supply of all materials, labour, T & P etc. and Construction of P.C.C Thrust Block (Anchor Block) Where ever required as per type design complete
Testing Of Pipe Sample From Authorised Institution
Providing Air Valve
Distribution Network & Related Components
Earth work in Excavation in all type of soil for pipe line trenches including lift 1.5 M and lead up to 30 M with backfilling , watering, ramming of excavated earth in the trenches.disposal of surplus earth as per direction of site incharge .
Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work (Note :- This item shall be paid with the condition that the recovered pipe from dismantling is reusable.)
25 mm dia
65 mm dia
Relaying Of Dismanteled GI Pipe To Excavated Trench
Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.
25mm dia
65mm dia
CARTAGE
Cartage of pipe and special, cement and steel from Rail Head to site of work and local cartage complete for works related to production of water.
Protection works of the above items as per site requirement
R.R.laid 1:6 Stone masonary
E&M Works at Pumping Stations ( Pump & Motar,Starter,Control Panel,Transformer)
S.I.T.C. OF CENTRIFUGAL PUMP SET WITH BRONZE IMPELLER , HEAVY DUTY MS BASE FRAME & COUPLING WITH GUARD. 150 LPM AND 408 METER HEAD.
S.I.T.C. OF SQUIRREL CAGE INDUCTION MOTOR SUITABLE FOR ABOVE PUMP TEFC 40 HP,2 Pole.
S.I.T.C. OF FULLY AUTOMATIC PUMP AUTOMATION CONTROL PANEL CUM STARTER OF DIFFERENT CAPACITIES HAVING INTELLIGENT UNIT 40 HP
SUPPLY OF POWER WIRE (25x3 )FOR ABOVE PUMP SET
CIVIL WORKS ( FOUNDATION) FOR ABOVE PUMP SET
SUPPLY AND FIXING OF GAUGES: PRESSURE GAUGE 100 MM DIAL 0-60 KG-1 NO. COMPOUND GAUGE 100 MM DIAL 0-5 KG-1 NO. WITH HEAVY DUTY CONTROL COCK, SYPHON AND SOCKET -1 SET
EARTHING : COMPLETE EARTHING FOR 01 PUMP SET ( G.I. EARTH PLATE, G.I. EARTH STRIP, PIPE ETC.)
SUPPLY MS ERW PIPE SIZE : 80 MM DIA THICKNESS 5.4 MM (24 METER) SLUICE VALVE 80 MM DIA CLASS 600 2.00 NOS, NON RETURN VALVE 80 MM DIA CLASS 600 1.00 NOS. AND SUITABLE MS FLANGES,RUBBER PACKING AND NUT BOLTS
Provision of Installation and Commissionign of above pump set.
Augmentataion Strengthning of Jardhargaon Village Water Supply Scheme Under JJM
Constriction of Intake Chamber (1.2 m x1.2 m x1.0m) including all labour & materials, materials, Machinary etc
Excavation in ordinary soil (loam, clay, sand) for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.
Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.
Providing, Supply and Carting, laying jointing fixing and testing of G.I. screwed pipe with specials in trenched (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (medium quality) including cutting and threading etc. complete.
25 mm dia
32 mm dia
40 mm dia
50 mm dia
Random Rubble Stone Masonry laid 1:6 cement, sand and mortar, in breast walls
Brass G.M/ Gate Valve
Pressure PN 1.0
25 mm dia
32 mm dia
40 mm dia
65 mm dia
Installation, testing and commissioning of DI Valves as per engineering norms anywhere in uttarakhand
Brass G.M/ Gate Valve
Pressure PN 1.0
25 mm dia
32 mm dia
40 mm dia
65 mm dia
Supplying of Sluice Valves (Scouring purpose) Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts nuts, rubber insertions etc. anywhere in uttarakhand
D.I Sluice Valve (Scouring purpose) (PN-1.00)
50 mm dia
Installation, testing and commissioning of Sluice valve (Scouring purpose) as per engineering norms anywhere in uttarakhand.
D.I Sluice Valve (Scouring purpose) (PN-1.00)
50 mm dia
Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand
G.I. Air Valve along with Isolating valve
20 mm dia
Installation, testing and commissioning of Air Valves as per engineering norms anywhere in uttarakhand
G.I. Air Valve along with Isolating valve
20 mm dia
Supplying and Fixing of Pressure Control Valve IS 5290 (Flanged) Including carting the same upto site of work and fixing the same and water supply line Including the cost of valves,specials,labour and T&P Complete in all respect.
100 mm dia
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For different types of valves.
Bulk water meter (Electromagnetic flow meter) based on Microprocesso
At Source
50 mm dia
Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2 and staging 12.00 meter.
CWR/GLSR/ Storage Tank 35 KL at CWR- Zone-2 ( Varsain)
CWR/GLSR/ Storage Tank 12.5 KL at CWR- Zone-3 (Burata)
CWR/GLSR/ Storage Tank 5 KL at Tank Zone-4 (Sanny Tok)
Thrust Block (Details attached as separate estimate)
Display of JJM Sign Board
Cartage of Pipes
Augmentataion Strengthning of Kukarbagi-Kataldi Water Supply Scheme Under JJM
Fixing / Repairing of all material, labour T&P etc. complete repair of structure as per specification / repair.
Steel Intake Chamber
Roughening filter
Supply and fixing of FRP coated MS Bucket type Chlorinator of 25 liters capacity with chlorination arrangements.
Providing, Supply and Carting, laying jointing fixing and testing of G.I. screwed pipe with specials in trenched (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (medium quality) including cutting and threading etc. complete.
40 mm dia
32 mm dia
25 mm dia
20 mm dia
15 mm dia
Excavation of soil mixed with single boulders etc. Requirement the use of special T&P if any for pipe line trenches including lift up to 1.5 and lead up to 30M with Back filling watering ramming of excavated earth in the trenches.
Cartage of GI (Medium) pipe from rail head Rishikesh to Basal site head
Random Rubble Stone Masonry laid Dry
Random Rubble Stone Masonry laid 1:6
Supply of all materials, labour, T&P and construct R.C.C. C.W.R. with MS ladder inside the tank, M.S. M.H. cover with locking arrangement, supply and fixing of outlet, inlet overflow and washout pipes, flooring 0.6 m wide apron, painting on tank body, ladder, MS M.H. cover etc complete with approved water proofing , testing, filling water for testing purpose, incl supply of vertical pipes and specials.
7.50 KL cap.
Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete :- WHEEL VALVE(CLASS-I)
25 mm dia
32 mm dia
Supply of all materials, labour, T&P etc. and construct wheel valve chambers as per type design (0..45x0..45x0.5m)
Concrete with cement sand and 40 mm gauge stone ballast 1:4:8 including supply of material labour T&P etc. for completion of work.
Making connection with the existing M.S Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main. (15mm-25mm)
Provinding and fixing CP Brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore
Providing and fixing brass ferule with CI mouth cover including boring and tapping the main. 15mm nominal bore
Supply & fixing of JJM Sign Board
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .