Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.1 L
EMD Value
₹1.2 L
Closing Date
15 Dec 2025, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CHIEF ENGINEER
LDA OFFICE VIPIN KHAND GOMTI NAGAR LKO.
PANDIT DEEN DAYAL UPADHYAYA SMRATIKA PARK ME SECHAI VYASTHA AWAM FOUNTAIN SANCHALAN HETU 01 NAG 18 MTR GHARI (15 HP MOTOR PUMP) KE BOARING AWAM MACHINERY ISTHAPNA KA KARYA.
2025_LDAUP_1096825_1
192/E-NIVIDA/CE/2025-26(14)
Open Tender
Electrical Works
Fixed-rate
LDA OFFICE VIPIN KHAND GOMTI NAGAR LKO.
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,475
SEC LDA
₹1.2 L
6 Dec 2025
6 Dec 2025
16 Dec 2025
6 Dec 2025
15 Dec 2025
6 Dec 2025
Transportation of D.C. Rig machine & its T&P from store to the site of tubewell.
Transportation of T.W. Assembly From Store to the site of Tubewell.
Transportation of 600 P.S.I Air Compressor and its T&P from store to the site.
Transportation of O.P Unit and its T&P from store to the site.
300 mm. dia 7.1 mm thick MSERW Housing Pipe
300x200 mm dia M.S Reducer
200mm dia 7.1 mm thick MSERW Plain Pipe
200mm dia 7.1 mm thick MSERW Slotted pipe
200mm dia Bail Plug
300 mm dia M.S. Clamp
300 mm dia Well Cap.
300 mm dia M.S. Ring
200 mm dia M.S. Ring
300 mm dia Tubewell assembly support
200mm M.S. Centre Guide
Supply of Lal Kuan quarry Pea Gravel 1.6 to 4.8 mm. size duly screened, washed and stacked, with carting loading, unloading complete at site
Installation of Rig Machine alongwith dressing the site of work then drilling by 200/ 300 mm size bit upto required depth then reaming by 450mm, 550mm, and 675mm size bits, after drilling the dismantling work will be done. Erection of DC Rig Machine, T&P and camp equipages
Dismantling of Rig Machine and its T&P
Drilling of 675 mm dia bore from GL to 80 M. BGL
Drilling of 550 mm. dia Bore from 80 M to 120 M. BGL
Drilling of 550 mm. dia Bore from 120 to 160 M. BGL
Drilling of 550 mm. dia. Bore from 160 to 180M. BGL
"Water arrangement charges for during the drilling (UPJN-2019-20-EP-(26)Attached)"
Logging of bore hole by Electric logger (UPJN-Oder Attached)
Barricading of site for safety with necessary T&P and required labour etc. complete.(UPJN-Order Attached)
Lowering of 300/200 mm dia size tubewell assembly from ground level to 370 M below ground level including gravelling work etc. complete. (A)300mm dia Housing Pipe from G.L to 66 M. BGL.
(B)200 mm. dia Plain/Slotted Pipe From 66 M. BGL to 80 M BGL
(D)200 mm. dia Plain/Slotted Pipe From 120 M. BGL to 160 M BGL
(E)200 mm. dia Plain/Slotted Pipe From 160 M. BGL to 165 M BGL
Erection of 600 PSI Air-Compressor, T&P and camp equipages
Development of T.W. by 600 P.S.I. Air Compressor upto 100 hrs
Dismantling of Air Compressor and its T&P
Erection of O.P. Unit, T&P and camp equipages
Development of T.W. by O.P. Unit upto 150 hrs
Dismantling of O.P. Unit and its T&P
Yield and verticality test of T.W. alongwith Chemical and Bacterialogical analysis of tubewell's water.
SUPPLY OF FOLLOWING ITEMS S/F of 15 H.P Clear water submersible pump complete with electric motor capable to operate on 415± volts 3 phase 50 c/s A.C. supply of 1000 LPM, 60 mtr Head (1200LPM 45M head 15HP) PSR
S/F of 20 H.P. switch gear along with starter and control panel, cabel etc. Complete
MAIN PIPING AND VALVES Set 1 S/F of 150 mm dia 5.4 mm thick M.S. column pipe with both end flanged and groove for passing of submersible cable in each lenth in 3m long Total 24 m with 1m long top pipe with cap (Damdam) and sealing ring. Nos 10 S/F of CI-D/F 90 bend of size 150 mm dia. Nos 1 S/F of CI-A/F tee of size 150 mm dia. Nos 1 S/F of M.S. Distance piece of 150 mm dia 1.00m long 2 Nos and 1.5m long 1 No. Nos 3 S/F of M.S. enlarger/reducer of suitable size. Nos 1 S/F of 150mm dia Sluice Valve with hand wheel Nos 2 (Confirming to15.780/I.S.2905) S/F of 150 mm dia Reflex Valve (Confirming to IS-5312 part-1) Nos 1 (UPJN-2019-20-PP -4 Attached)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.85 MB
BOQ_2019451.xls
BOQ • 0.38 MB
TD.pdf
Tender Documents • 3.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .