Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.9 LAccepted-AOC | 1 | Accepted-AOC First lowest bidder | |
| 2 | 2₹2.9 L+₹1.0 L (54.9%)Rejected-AOC | 2 | Rejected-AOC Second lowest bidder | |
| 3 | 3₹3.0 L+₹1.1 L (58.7%)Rejected-AOC | 3 | Rejected-AOC Third lowest bidder | |
| 4 | 4₹3.0 L+₹1.1 L (60.1%)Rejected-AOC VILL FARAKKA P O FARAKKA BARRAGE DIST MURSHIDABAD WB PIN 742212 | MURSHIDABAD | WEST BENGAL | 742212 | 4 | Rejected-AOC Fourth lowest bidder | |
| 5 | 5₹3.1 L+₹1.2 L (66.1%)Rejected-AOC | 5 | Rejected-AOC Fifth lowest bidder |
Tender Value
₹2.8 L
EMD Value
₹5,550
Closing Date
3 Jul 2024, 4:00 pmClosed
Executive Engineer, Head Works Division I
Farakka Barrage Project, P.O. Farakka Barrage, Dist. Murshidabad, West Bengal, PIN 742212
As per bid document
2024_FBPF_813518_1
GM/FBP-15 of 2024-25
Open Tender
Civil Works
Item Rate
7 days
Farakka
As per bid document
2 documents required · 2 mandatory
₹0
₹5,550
Yes
13 Sept 2024
25 Jun 2024
4 Jul 2024
25 Jun 2024
3 Jul 2024
25 Jun 2024
Amount
Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore.
For depth up to 150 metre. (ii) 50 mm dia.
For depth up to 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. - 100 mm. Dia.
For depth up to 150 metre for 80 mm dia. tube well with top enlargement of 150 mm dia. 150mm. Dia.
Supplying brass-strainer with brass socket of approved make. (Heavy type) 100 mm. Dia.
Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, short piece etc. including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect.
32 mm dia medium quality
100 mm. dia medium quality
150 mm. Dia. Medium quality
Supply, fitting and fixing steel cutter piece up to 450 mm long with socket – 75 mm dia
Supplying fitting fixing plug of approved make confirming to I.S. specification - 75 mm dia.
Supplying fitting fixing G.I. cap at top. 150 mm.
Washing and developing tube well with air compressor pump and Engine for 8 hours contentions pumping per day with necessary arrangement for testing the yield in gallons per hour with V notch including hire and labour charges for all tools and plants and scaffolding as required.
Packing the annular space between the outside of the tube well pipes and strainers and the bore with 'pea' size wagheed gravel of approved quality having size from 2mm. To 5mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.
Supply, installation and commissioning 2.2 kilo Watt, Single Phase,240 ±10%Volts,50Hz, 32 mm delivery submersible pump set (Kirloskar or equivalent) including all ISI mark necessary accessories, auto cut voltage stabilizer, control panel box, Havel or equivalent make main switch etc.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity-white.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
M/S ANJAN KUMAR GHOSH
M/S LEFT BANK CONSTRUCTION
SACHIN PAL
SWADHIN CHOWDHURY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .