False ceiling works along with repairing, maintenance and painting of old godown near DuttaBundh at STPS (T).

Amount

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (i) 12mm

(A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)(ii) Sal : Local.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(i) Tor steel/Mild SteelI. SAIL/ TATA/RINL

Priming one coat on timber or plastered surface with synthetic oil bound ,primer of approved quality including smoothening surface by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) - (i) Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) - (ii) Two coats (white in shade)

200 mm th. Brick work with fly ash bricks set in cement sand mortar(1:6) in/c prackingout joints curing,scaffolding etc. complete in all respect.

Neat cement punning about 1.5mm thick in wall,dado,window,sills,floor,drain etc. Note:-Cement 0.152cum per 100sqm.

Plastering (To wall,floor etc.)with sand and cement mortar in/c rounding off or chamfering corners as directed and racking out joints in/c throating,nosing and drip course. Scaffolding/staging where necessary(Ground floor.) i) with 1:6 cement morter a)15mm thk. Plaster

Stripping off worn out plaster and racking out joints of walls celling etc.up to any height and any floor in/c removeinhg rubbish,within a lead of 75m as directed.

Artificial stone in floor dado staircase etc. with cement conc. (1:2:4)with stone chips,laid in pannels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) in/cl smooth finishing and rounding off coeners in/c raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sqm all complete in/c all materials and labour. i) 20mm thick

Dismantling artificial stone flooring upto 50mm thk. By carefully chiselling without damaging the base 7 removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

White washing including cleaning and smoothening surface thoroughly a) two coat

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (iii) Two coats.

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- b) With 0.63 mm thick sheet

Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.

Single brick flat solling of picked jhama bricks in/c ramming and dressing the bed of proper level & filling the joints with sand /powdered earth.

100mm th Brick work with ash bricks.

Dismantling of all types of masonary excepting cement concrete plain or reinforced ,stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor in/c roof. a) Upto 150 mm thick

Panel shutter for doors & window frame as per design (each panel plank consisting of single with out joints )in/c fitting the same in position but ex/c the hinges & other fittings. In ground floor. (In case of non-supply of single plank,Penal rate of reduction of 20% will be made). i) Sisu,gamar,champ,bhola

Wood work in door and window frame fitted and fixed complete in/c a protective coat of paint at the contact surface of the frame.(The quantum should be corrected upto three decimals). a) Local Sal.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor). (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Iron butt hinges of approved quality fitted & fixed with ISI mark. i)75mmx40mmx1.120mm

Iron butt hinges of approved quality fitted & fixed with ISI mark. ii)100mmx50mmx1.25mm

Iron door ring of approved quality fitted & fixed with nut complete. i) 50 mm dia

Iron door handle of approved quality fitted and fixed complete. i)100mmx5mm.

Iron socket bolt of approved quality fitted & fixed complete. a)100mm long x10 mm dia bolt

Iron socket bolt of approved quality fitted & fixed complete. b)150mm longx10 mm dia bolt

Renewing M.S clamps for door and window frame made of flat bent bar ,end bifurcated with necessary screws etc. In cement concrete (1:2:4) in/c cutting of brick work. a) 40mmx6mm,200mm length.

Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs. a) with 50mm iron Butt-hinge. i) Local Sal.

b) with 75mm iron Butt-hinge. i) Local Sal.

Wooden sash bar 50mm. X 35mm. Upto 1200 mm length with coach screw and flat iron clamps (40mm. X 6mm.) fitted and fixed complete in any position. (a) Local Sal.

Renewing 125mm long wooden buffer block. i) With Sal : Siliguri.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On steel or other metal surface : :With super gloss (hi-gloss) - (i) Two coats (with any shade except white)

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall). (i) 3 mm thick (weighing 7.4 kg/Sq.m)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity).

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL

200 mm. thick or more Brick work with Fly Ash Bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect. (a) In ground floor.

100 mm. thick or more brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.a) In ground floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface complete as per manufacturer's specification and as per direction of the EIC. a). One Coat.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : With super gloss (hi-gloss) (a) On steel or other metal surface : (i) Two coats (with any shade except white)

Total quoted value including overhead/profit (above or below) over the expenditure limit of Rs. 40,000/- i.r.o. the following: Execution of any items from WB PWD SOR (S&P) w.e.f 01/11/2017 for necessary Sanitary & Plumbing works including supply,fitting & fixing of water pipe line connection from Main Supply line from Plant and laying of pipeline up to the RCC Overhead tank with all fittings of approved brand and quality. Payment for finished items of works will be made as per WB PWD SOR (S&P) w.e.f 01/11/2017.

RUDRA ENTERPRISE

CIVIL CONSTRUCTION & MAINTENANCE CONTRACTOR