Improvements to Temple at Sri Venugopala, Sri Venkateswara and Sri Someswara Swamy Temple, Kanumuru (V), Pamarru (M), Krishna District.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges, overheads & contractor profit etc., complete

C) Reinforced cement concrete

Conveyance of Debris clearance to a lead of 5Km excluding loading and un-loading charges including overheads & contractor profit etc., complete.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental labour charges, hire charges of T&P excluding seniorage charges, and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 50% 40mm size and 50% quarry including cost and conveyance of all materials like cement, fine aggregate (6) (sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, all charges for mixing, laying concerete in position, vibrating, curing, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges, overheads & contractors profit etc., for finished item of work for footings, (APSS No. 402)

Ornamental brick work in C.M. (1:5) using common burnt clay bricks prop: (Cement Screened sand) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 50 Kg/Sqcm using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site exluding seigniorage charges, excluding scaffolding for construction of masonary but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, including overheads and contractors profit charges, curing, sales and other taxes on all materials etc., complete for finished item of work.

A) Up to Sthambhavargam level and class varity

B) Above Sthambhavargam 1st floor

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work excluding seinorage charges, sales and other taxes on all materials in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work.

A) Up to Sthambhavargam level 2nd class varity

B) Above Sthambhavargam level/ 1st floor

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, and excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing, laying concrete, curing etc., complète but excluding cost of steel and its fabrication charges for finished item of work but excluding centering shuttering and including overheads & contractors profit etc., complete for fnished item of work

B) Slab o-4 1/2" thick

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different ameters for RCC works, truding labour charges for straightening, cutting, bending to required izes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per 0 approved designs and drawings, Including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting bending, placing In position, tying including sales and other taxes on all materials etc.,and overheads & contractors profit complete for finished item of work in all floors.(APSS No.126)

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all 9 operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS

Providing Arches in salaharam in arch gate

Providing cement Vigrahams using cement, sand, steel reinforcement, Iron mesh, Brick bats, flat tile etc. including cost and conveyance of all materials and all labour charges, excluding seigniorage and scaffolding charges but including curing and operational charges and including overheads & contractors profit etc., complete for fnished item of work asper Silpi SSR 2012

Supplying and fixing of Mild steel Grill gate of Heavy Gage of approved design including cost of steel rods fabrication charges and applying red oxide coat including all incidental, conveyance and fixing charges, overheads & contractors profit etc., as per SSR BMM-V.14 & 15

Painting two coats with synthetic enamel: paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre to new iron work 13 including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors SS

Supply & Fixing of scaffolding Including cost & conveyance of all materials such as casurina poles, bamboos, bamboos mats and coir rope etc., including labour charges and including overheads & contractors profit etc., complete for fnished item of work asper Silpi SSR 2012 Up to 20 feet height

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted filling sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental labour charges, hire charges of T&P excluding seniorage charges, and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, and excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing, laying concrete, curing etc., complète but excluding cost of steel and its fabrication charges for finished item of work but excluding centering shuttering and including overheads & contractors profit etc., complete for fnished item of work

F) Roof slab 120mm thick

G) Ornamental sunshade 2'0 vide

I) Plain sunshade

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., and overheads & contractors profit complete for finished item of work in all floors.(APSS No.126)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all 6 materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges,curing, etc.,and overheads & contractors profit complete for finished item of work. APSS No. 501 & 504)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work (SS 901,903 & 904)

Plastering 20 mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work (SS 901,903 & 904)

Ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all 9 operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compund manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of, wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Ornamental Brick Masonry in C.M(1:5) mix using II nd class bricks well burnt from any kiln, inclusive of brick bots, and madras terrace bricks, including cost & conveyance of all materials, labour charges, scaffolding charges, and curing and excluding seniorages charges and sales and other taxes on all materials including over head and contractor profit etc., complete for finished item of work.

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002(The vertical frame of door shall be embedded in flooring for a depth of not less than10 mm)

Supply and wiring with 2 run of 1.5 Sq.mm IST marked FRLS/FRLS-H/HFFR/ZHFR PVC insulated flexible copper cables 1100V grade as per 1S. 694/1990 & 15:17048/2018 specification for copper cable in existing pipe 13 with supply of 6A/10A 1 way I module Modular Switch, 3 Plate Jumbo Ceiling Rose and Modular switches with cover plate and Gl switch box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including overheads and contract profits excluding sales and other taxés complete for finished item of work

Supply and fixing of 1 No 16A/6A, 1 way, Combi Socket Modular Socket with shutter and 1 No 16A / 20 A switch control (5 in one) on existing 3 Module Hot dip galvanized Metal Box including earth connection and all labour charges, including overheads and contract profits etc., excluding sales and other taxes complete for finished item of work.

Supply and fixing of 9W LED Lamp input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170-220 degrees, B22 base, along with supply of batten holder/slanting holder ISI Marked in lieu of ceiling rose of light point complete with all connections and all labour charges with 9W LED bulb (for new installation), including overheads and contract profits excluding sales and other taxes complete for finished item of work.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220-260 Volts, with high power LEDs, having System Efficacy of>-100 lumens/watt, PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K -5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty along with Tw/PVC round blocks, supply of No:8 screws of 35mm, supply of PVC rawl plugs & supply of ISI marked 1623/0060 twin core twisted/ Flat heavy copper cable wire..including overheads and contract profits excluding sales and other taxes complete for finished item of work. Makes: As per list of recommended brands as category I.

Supply and fixing of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator.

Supply and Fixing of 25mm outer dia (1.60 -1.80) mm thickness medium grade with IS:9537-part 3 rigid PVC Conduit with all accessories fixing on chromium plated metallic base saddles and along with raw plugs, 32mm screws, 25mm 1,2,3,&4 way junction boxes, 25mm PVC bends, 8 or 9 module hot dip galvanized metal boxes for switches for Light, Fan and separate plug point including all labour charges, overheads and contract profits..etc excluding sales and other taxes complete for finished item of work.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) and 1 Run of 14 /0.3mm (1.0 Sq.mm) ISI marked FRLS/ FRLS-H/HFFR/ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter ks EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook, zinc alloy body ith single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in-Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work.

Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x0.457m or any other size as specified set over a base coat of CM (1:8), 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete Sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

Supply and application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC( Volatile Organnic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to size, sales & other taxes, incidental, operational and all labour charges etc, and overheads & contractors profit complete for finished item of work in all floors.

Augoring and boring of holes in site for Bored Cast-in-situ Piles for building foundations in loamy clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all perations, incidental, labour charges hire charges for machinery, augure bore drill and shell equipment, sales and other taxes on all materials, including overheads & contrect Profit etc., complete for finished item of work for piles.

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, and excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing, laying concrete, curing etc., complète but excluding cost of steel and its fabrication charges for finished item of work but excluding centering shuttering and including overheads & contractors profit etc., complete for fnished item of work

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement: Screened sand) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non-Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance el all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work (SS 901,903 & 904)

Plastering 20 mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work (SS 901,903 & 904)

Painting with White Cem two coats including cost of paint labour charges, conveyance, watering, curing, operational charges but excluding scaffolding Sales Gother tore charges etc. complete for finished item of work.

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors SS

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, wate, etc., to site, excluding seigniorage 19 charges, sales & other taxes on all materials, and'af operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding. lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and incuding overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and lconveyance of all materials like cement, sand, wațer,ete, to site, excluding seigniorage charges, sales & other taxes on all materials, and all opedational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as.directed by Engineer - in - charge etc., and incuuing overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compund manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of, wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Supply & application of one coat of deco orient base & two coats of acrylic exterior. emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior 15 walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. SS 911