Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹15.4 Laccepted-aoc | ₹15.4 L | accepted-aoc |
Tender Value
₹15.6 L
EMD Value
₹15,600
Closing Date
19 Aug 2026, 4:05 pmClosed
VIJAYAWADA MUNICIPAL CORPORATION
Jawaharlal Nehru Buildings
Civil Maintenance of fountains underneath of Benz circle flyover and Skew bridge in Circle-3 area.Rc.E3.PD3(Parks)-114685/2026
976325
E Procurement Notice No. 18 /VMC/CDB/2026-27, Dt. 03-08 -2026 Rc.E3.PD3(Parks)-114685/2026
OPEN - NCB
Similar Work
NTR, ANDHRA PRADESH
5 documents required · 5 mandatory
₹551
₹15,600
4 Sept 2026
13 Aug 2026
13 Aug 2026
Supply and application of epoxy coving 50mmx50mm width at the corners of the walls - MAT-08735, BMT-C.49
Supply and Transportation of ………..,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category II.
3.00HP 15Stage MAT - 03652
5.00HP 25Stage MAT-03654
Supply of ……...ISI marked PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category II. 3 core, 4.0 Sq mm MAT-02783
Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. MAT-03951
Supply of ………... Protection suitable for TP/SP out going MCBs and for 1 No of 4 pole MCB/Isolator incomer etc., complete as per IS 8623; IS 13032; IEC 61439-3. Makes: As per list of recommended brands as category II MAT-03180 4 Way VTPN DB with IP 43
Supply and installation of CASCADE Nozzles of size 25mm with proper spacing in between nozzles, including cost and conveyance of all materilals, and labor charges for fabrication, fixing, threading,weldings etc., complete for finished item of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
114685-BOQ1.xlsx
TENDER_DOCUMENT • 0.04 MB
NIT-114685.doc
TENDER_DOCUMENT • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .