Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC NO 354 2ND CROSS VARADARAJNAGAR VIDYARANYAPURA POST BANGALORE 5600 097 | 5600097 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹52.8 L+₹4.7 L (9.72%)Rejected-Finance | L2 | Rejected-Finance Quoted rates higher than L1 | |
| 3 | L3₹53.6 L+₹5.5 L (11.4%)Rejected-Finance | L3 | Rejected-Finance Quoted rates higher than L1 |
Tender Value
₹54.8 L
EMD Value
₹1.1 L
Closing Date
6 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF TRIVANDRUM
CWE AF TRIVANDRUM HQ SAC IAF COMPLEX AKKULAM THURUVIKKAL POST TRIVANDRUM 11
Addn/ Altn to officers MESS at AF Stn Suryalanka
2022_MES_570472_1
CWE(AF)TVM/82443 E8 Addn/Altn MESS at Suryalanka
Open Tender
Construction Works
Lump-sum
270 days
Suryalanka
Class C category a(i)
6 documents required · 6 mandatory
₹1,000
AGE I AF Suryalanka
₹1.1 L
Yes
10 Mar 2023
21 Dec 2022
8 Feb 2023
21 Dec 2022
6 Feb 2023
18 Jan 2023
21 Dec 2022 - 31 Dec 2022
Amount
GENERAL SUMMARY (Note : Schedule 'A' Part I to IV are prepriced by MES under Ser No. 2 to 5.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only)
Total of Schedule ‘A’ Part I “BUILDING/STRUCTURES ”
Total of Schedule ‘A’ Part II “INTERNAL ELECTRIC SUPPLY ”
Total of Schedule ‘A’ Part III “ EXTERNAL ELECTRIC SUPPLY ”
Total of Schedule ‘A’ Part IV “MISCELLANEOUS ITEMS for Addn/Altn to Officers Mess”
Sch 'A' Part- V - MISCELLANEOUS ITEMS (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)
M&L for Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors/ pavings etc laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exteriaor weather coat paint over a coat of primer of surfaces all as specified and directed.
M&L for preparing surfaces plastered or unplastered old surfaces of walls and applying one coats of exteriaor weather coat paint all as specified and directed.
Taking down and removing of existing water proofing treatment of any description completely, taking down of old cement plaster if any or roughening of surfaces and cleaning the top surface of RCC slab with using wire brushes and water to remove all dust and loose particles etc complete all as spd and as directed.
M&L for water proofing treatment with 4mm thick APP modified membrane weighing not less than 4Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 Gram/Sqm having softening point not less than 140 degree celsius, longitudinal tensile strength not less than 300 N/Sqm, tearing strength of 180 N, laid after applying a coat of Bitumen Emulsion, Primer @ 0.20Kg/Sqm over the thoroughly cleaned surfaces to be water proofed. Membrane shall then be laid with 10Cm side overlaps and 15Cm end laps completely thermo fused by flame torch application as per manufacturer's instructions. Care shall be taken to avoid wrinkles while sticking the membrane on the bitumen surface. A coat of hot blown bitumen 90/15 shall be applied on top of the membrane @ 1.20 Kg/Sqm and finally finished with solar reflective aluminium paint @ 0.10 Kg/Sqm. The water proofing membrane shall be extended upto a height of minimum 30 cm on wall and inserted by cutting groove and filling with bitumen complete all as specified and as directed.
S & F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers incl make in good to the disturbed surface MS bolts, grouted to wall and connecting up including provision in cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting arrangements complete all as specified and directed.
S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.
S & F 36W LED clean room bottom opening MS frame, IP65, dust free and zero maintenance LED clean Room Bottom opening luminair for hygenic facilities, with powder coated CRCA housing body, LG7 compliant, unified glare ratio less than 19, THD<10%, CRS>80%, 240V, 5700K, ps diffuser opal finish, incliding cutting and inserting making good of the ceiling any other acccessories complete all as specified and as directed. Make : Model - BOCR2X2R36WLED857SPCMSGEN of hAVELLS or equivalent in approved make
S & F blank spacer plate for single module.
S & F LED lights fitting 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Bajaj/Havells/Wipro/Philips
S & F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make : Bajaj/Havells/Wipro/Philips
S & F wall mounting fan premium quality 400mm sweep complete all as specified and directed.
Removing the existing energy meters, noting down the meter reading and handing over the same to the department and re-fixing same after comletion of work all as specified and directed.
S&F 15m dia angle cock , cast copper alloy, capstan head chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed to PP-R pipes all as specified and directed.
S&F bib taps , CP facncy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore dia and fixed complete all as specified and directed.
S&F 15mm bore pillar taps CP brass with capstone head with or without lettered hot or cold fancy type heavy duty complete all as specified and directed.
Supply, installation, commissioning and testing of LT Panel out door, double door type made out of CRCA Sheet of 3.15 mm thick with powder coated painting framesuitable size for fixing the I/C & O/G MCCB mentioned below made out of angle iron 45 x 45 x 6 mm and four numbers of 300 Amps aluminum strips / bars duly insulated on insulators - 4 Nos / suitable size Bakelite sheet, free space between MCCBs / busbar and other connection items should be provided, the space between ground to panel should be 60 cm with PCC foundation for LT Panel, LT panel should be provided with necessary locking arrangement, danger notice sticker, provn of cable entry and exit arrangement for Al cable size upto 120 Sqmm and glands, thimbling for connection of cable to MCCBs/bus bar etc and glands, internal wiring with FRLS copper wires of suitable size and marking of each MCCB function with suitable size letter and including the following :- (A) Main Incoming (i) MCCB conforming to IS:13947 (Part-II), IEC-947, TPN (4 pole), 200 Amps, 415 volts, 50 Hz, rupturing capacity 26 KA - 01 Nos. (ii) LED Multifucntional Panel meter to measure voltage, current frequency, power factor, kWH, etc with all connected CTs. (iii) LED indicating lamps with colour Red, Yellow, Blue (03 Lights) - 01 Set. (A) Main Outgoing (i) MCCB conforming to IS:13947 (Part-II), IEC-947, TPN (4 pole), 63 Amps, 415 volts, 50 Hz, rupturing capacity 16 KA - 05 Nos. (i) MCCB conforming to IS:13947 (Part-II), IEC-947, TPN (4 pole), 32 Amps, 415 volts, 50 Hz, rupturing capacity 16 KA - 02 Nos.
M&L for Earthing complete with galvanised iron strip 32 × 6mm as earthing lead, buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with galvanized earth lead GI strip 32X6 by means of bolts, check nut and washers of GI or steel, GI pipe medium grade of 40 mm bore as protection pipe, GI strip of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia medium grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed.
M&L for Earthing complete with galvanised wire of size 4mm earthing lead, buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with galvanized earth lead GI wire of size 4mm, GI pipe medium grade of 40 mm bore as protection pipe, GI strip of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia medium grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed.
Supply and fixing garden lights LED bollard 10W, 0.6 M height with necessary connection with Junction boxes including 20x20x20cm foundation with PCC (1:2:6) complete all as specified and directed. Make : Model-Minimountbl10wled830psymtopmma of Havells or equivalent in approved make
Supply, install, commissioning and testing of commercial Electrical Chimney of size 90 cm,Stainless Steel Finish with following features complete all as specified and and directed by Engr-in-Charge :- Features • Dry Heat Auto Clean Technology with 9-Speed Touch Controls • Both Side Operational with Gesture Motion • Touch Controls with Digital Display • Gesture Motion for ON and 9 Speed Only • Front Panel with Black Glass • 8mm Thick Light Dark Tempered Curved Glass • BLDC Motor with Powerful Airflow • Stainless Steel Finish • Heavy Duty Baffle Filter • Energy Saving LED Lights • Metal Blower and Metal Housing • Metal Oil Cup • Noise Level : 65 dBA(max) • Size: 90 cm Make : Model : OPEC DHC 90 (IS) of KAFF or equivalent in any approved make (Note : Rates quoted shall be inclusive of necessary PCC / masonary work for fixing and necessary electrical connection to install)
Supply & fixing DOL motor starter, 16A Contactor, O/L Relay, 2 Module IP55 complete all as specified and as directed. Make : C&S or equivalent in approved make
DHANA CONSTRUCTIONS
Ruchira Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .