Manufacturing,Design,fabrication,supply and erection of 355KW/476HP squirrel cage induction motor with vertical turbine pump(VTP) set for standby at Padavalarevu intakewell Gunadala in Work Division-III area(VMC General Funds).Rc.E4-106051/2025 2nd Call

Manufaturing , Design, fabrication, supply of pump type Vertical trubine pump (VTP) , pump size: 550T4B4, Capacity 22500LPM, Columnn size:350X60, bowl Head:62MWC, Discharge size:DS-350, Pump weight:4690Kgs, Lubrication type: self water, No.Of stages: 2No;s Naminal speed:1475RPM, Material of construction: Bowl:CI FG260, IMPELLER:SSCF8M ASTM A743, IMPELLER SHAFT: SS410T ASTMA276, LINE SHAFT/HEAD SHAFT: SS 410T ASTMA276, COLUMN PIPE: ERW STEEL PIPE, DISCHARGE HEAD BODY: CI FG 200 IS:210, BOWL BEARING: BRONZE LTB2 IS:318, STRAINER: MS FAB.IS:2062, AND PUMP HEAD :61.30M , BOWL HEAD:62M, SHUT OFF HEAD : 90.36M, COLUMN PIPE DIA :350MM, DELIVERY PIPE DIA:350MM,LINE SHAFT DIA:60MM. etc.Complete including cost and convency of all matrial and as per approved desigen etc compete as directed by the departmental autthorities

Design, fabrication, assembly, supply of 355KW LT motors 4 pole, 415V , 1475RPM Squrrel cage induction motor suitable with VTP pump set etc.Complete including cost and convency of all matrial and as per approved desigen etc compete as directed by the departmental autthorities

Manufaturing , Design, fabrication, supply of base Plate suitable size of 355KW pump set etc.Complete including cost and convency of all matrial and as per approved desigen etc compete as directed by the departmental autthorities

Manufaturing , Design, fabrication, supply of VFD control panel with all accessories suitable for 355KW pump set etc.Complete including cost and convency of all matrial and as per approved desigen etc compete as directed by the departmental autthorities

Labour charges for Erection, Testing and commissioning of above Supplied Panel Board and motor, pump set in existing place etc., Complete. Complete including cost and convency of all matrial etc compete as directed by the departmental autthorities

Supply and transportation of following 300Sq mm X 3.5 cor XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I. SSR 2024-2025,

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. 3.5 coreX300Sq m Makes: As per list of recommended brands. SSR 2024-2025,ELEC-4.1.11

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size:300 Sq mm Makes: As per list of recommended brands. SSR 2024-2025,ELEC-4.1.13

Earth work excavation of trench in hard ground soil laying of U.G cables upto 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of trench duly providing route indication embedded in C.C including cost and conveyance of materials and labour charges etc., complete. SSR Data