SPECIAL REPAIR TO CERTAIN BLDGS INCLUDING MINOR AND REVENUE WORKS AT GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F vitrified coloured and printed tiles of size 600 mm x 600 mm x 9 to 10 mm thick as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and S & F non skid ceramic coloured tiles square / rectangular area of each tile exc 0.06 sqm but not exc 0.11 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.11 sqm but not exc 0.18 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing and S & F Glazed Ceramic tiles of 300x200mm size and 6-7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

S & F Glazed Ceramic tiles of 300x200mm size and 6-7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10cm in width and set and jointed in C M 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in CM 1:6 and 2nd ( top ) layer of 5 mm thick rendering in CM 1:4( top layer mixed with water proofing compound as per manufacturer's instructions) finished even and smooth without using extra cement and including preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

M & L for rendering 5mm thick in C M 1:3 on ceiling surfaces and finished even and smooth without using extra cement and applying 3 coats of white wash on ceiling surfaces after preparation of the newly plastered surfaces of ceiling complete all as specified and directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement and preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement and including preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying first coat of white wash and two coats of colour wash complete all as specified and directed.

S & F for Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing rubbish off the premises of cantonment complete all as specified and directed.

M&L for 25 mm thick, PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregated) as in flooring finished to recieve floor tiles/kota stone complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and direccted.

M&L for 100mm thick, PCC (1:2:4) type B-1 (using 20 mm graded stone aggregated) as in flooring and finishing the surface even and fair without using extra cement including forming 12mm thick expansion joints filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound Grade-A complete all as specified and direccted.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection finishing the surface even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size not exceeding 1.50 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size exceeding 1.50 sqm but not exceeding 4 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down shutters of any description and in any position of size exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed.

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates of size 125 mm X 60 mm , including fixing of necessory lugs , hinges , lock strike plates , etc. complete all as specified and directed.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and finishiung the surface to match with existing surfaces complete, as specified, and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium openable window shutter with aluminium section weighing 0.55 kg / RM including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately under appropriate items of Sch 'A'.

M & L for powder coated aluminum grill of design No DG-104, 6.5 mm x 4.5 mm Section of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed.

S & F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm (weight not less than 600 gms / sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in the opening as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S & F 35 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S & F steel ventilatores with top hung glazed shutter including projecting type hinges with steel handles and steel peg stays , complete without glazing bars, dovetailed or welded and including mild steel grills/guard bars of approved design or pattern made of 12mm dia square bar as shown on CE (Fy) Hyderabad drawing No TD/AR/06 sheet No 2/8 dated 03.04.02 complete all as speciafied and directed.

S & F 35 mm thick factory made Flush shutters solid core construction with block board core and plywood face panels commenrcial face on both sides with lipping / frame to match with and including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F butt hinges 100 mm long stainless steel medium weight and fixed to wooden or PVC frame with stainless stell screws complete all as specified and directed.

S & F 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F aluminum alloy handles 150 mm size fabricted type anodized complete all as specified and directed.

S & F butt hinges 100 mm long mild steel medium weight cold rolled complete all as specified and directed.

S & F aluminium alloy, anodized sliding door bolt of 300 mm length with hasp and staple (clip type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

M & L for Curtain rod, powder coated aluminum alloy of 20 to 25mm dia pipe decorative finish with fixed on walls with brass screws with PVC rawl plugs as in curtain rods fixed in repair complete all as specified and directed.

S & F in repair vitreous china wash basin,white flat back , size 580mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe including PVC connections 15mm size with PTMT nuts of length of 600mm complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (Pedestal pattern) white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed. Make: Hindware/Parryware/Cera 1st Quality

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base and finishing top surface even and fair complete all as specified and direccted.

M & L for mild steel framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other coverings, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for mild steel roof trusses (framed) trusses purlins and fastening (etc.,angle, channel) or flat section including distance pieces, MS plates / gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 quality A also fastening and fixing and including applying one coats of coat of primer alround before fixing in position complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roofing, self drilling and self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating plain steel sheet 0.45mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/caldings/ridges, hips, valley gutters, drip and straight flashings cut to length & bent to shape required, fixed using hot dip galvanised, self drilling and self tapping screws complete all as specified and directed.

S & F Mild steel, 1.00mm thickness plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S & F in repair soap dish & holder , colour chrome, brass holder fittings fancy type complete all as specified and directed Make: Confirming to Cat Part CAN CHR 1131N of Jaquar or equivalent of Parryware/Hindware

S & F for vitrious china soap dish and fixed with screws complete all as specified and directed.

S & F in repair 10 mm thick plain edge moulded Corner Glass shelf with brackets of 300 mm wide (Make Jaquar ACN-1173 Corner Glass Shelf (with Bracket) equivalent of Parryware/Hindware complete all as specified and directed.

S & F for toilrt paper holder, vitrious china box type and fixed with screws complete all as specified and directed.

S&F in repair for swivel shower rose chromium plated 15 mm in pipe including fixing to steel pipe complete all as specified and directed. Make: OSH-CHR-1603 of Jaquar or equivalent of Parryware/Hindware

S & F in repair PVC (SWR) floor/Nahani trap 75 mm bore, plain with grating doom including jointing with solvent cement complete all as specified and directed.

S & F in repairs Stainless steel Cockroach trap with Grating of size 150 mm x 150 mm size suitable to cover Nahni Trap of Size 100mm dia complete all as specified and as directed. Make Prayag or equivalent of Polytuf/Sintex

S & F in repair Bib taps cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15 mm bore of GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair Stop valves fancy type chromium plated ISI marked cast copper alloy screwed down high pressure for 15 mm bore of GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

Vitreous China urinals, bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:3 securing urinal to plugswith including 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified and directed. Make: Hindware/Parryware/Cera 1st Quality

S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S & F in repairs PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

S & F PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

Taking up or down existing unserviceable mild steel water tubing and connections 15 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 15mm outer dia uPVC pipes of pressure rating 10Kg/Sqcm complete with all fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down existing unserviceable mild steel water tubing and connections 20 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 20mm outer dia uPVC pipes of pressure rating 10Kg/Sqcm complete with all fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S & F (concealed / open) 15mm outer dia uPVC pipes of pressure rating 10Kg/Sqcm complete with all fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S & F (concealed / open) 20mm outer dia uPVC pipes of pressure rating 10Kg/Sqcm complete with all fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S & F in repair unplastisized PVC ball valve with handle (stop valve) of size 20mm dia both and threated complete suitable for PVC pipe fitting with ASTM-1785, Schedule 40 complete all as specified and directed

S & F in repair unplastisized PVC ball valve with handle (stop valve) of size 15mm dia both and threated complete suitable for PVC pipe fitting with ASTM-1785, Schedule 40 complete all as specified and directed

M & L for Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F in repair for Bib Cock 2-way Bib Cock with Wall Flange complete all as specified and directed. (Make:FLR-5041N of Jaquar or equivalent of Parryware/Hindware

S & F in repairs counter sunk wash hand basin with waste coupling complete all as specified and directed. (Make Jaquar Cat No CNS-WHT-WB02 Wash Basin Size (mm) 185 x 450 x 355 and & ALD-705 (wasteCoupling 32mm dia) or equivalent of Parryware/Hindware)

S & F in repair 15 mm bore fancy type basin mixer pillar cock with brass fange with PVC connection cast copper alloy chromium plated, screwed down high pressure, iron pipe and fixed complete all as specified and directed. (Make Jaquar Cat No FUS-29051B or equivalent of Parryware/Hindware)

S & F in repair Chromium plated, fancy type, shower rose 50mm dia with swivel joints of any colour for fixing with 15 mm bore of pipe complete all as specified and directed.

S & F in repair shower arm 300 mm long of any colour for fixing with 15 mm bore of pipe complete all as specified and directed. Make :- JAQUAR CAT part No. SHA-CHR-479 or equivalent of make Parryware/Hindware.

S & F in repair shower arm 450 mm long of any colour for fixing with 15 mm bore of pipe complete all as specified and directed. Make :- JAQUAR CAT part No. SHA-CHR-479 or equivalent of make Parryware/Hindware.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S & F in repair chromium plated brass tubular towel rail 24" long (60 cm) with lower hangers complete all as specified and directed. Make :- Make :- JAQUAR CAT part No. ACN-1111NM or equivalent of make.

S & F in repairs 15 mm bore CP brass bib tap with wall flange screwed down, screwed for iron pipe complete all as specified and directed. Make Jaquar Cat No FUS-29037 or equivalent of Parryware/Hindware.

S & F in repairs 15 mm bore CP brass angle cock stop valve screwed for iron pipe complete all as specified and directed. Make Jaquar Cat No FUS-29053 or of equivalent model and make.

S & F in repair stainless steel health faucet with 1 mtr tube and hook complete all as specified and directed. Make Jaquar ALD 573 or equivalent of Parryware/Hindware

S & F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm (weight not less than 600 gms / sqm ) and fixed with aluminium wire staple complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins / spring clips and S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

Excavating in posts holes (or similar holes) in any type of soil each not exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm thick each layer watering, and removing surplus soil to a distance not exc 50 mtr away and making good the surface complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundations, fillings and mass concrete etc complete all as specified and as directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in beams, cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in slab supported on walls, beams, columns in floor, landing etc complete all as specified and directed.

M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed

M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed .

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars ,6 mm to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia , as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for spreading, levelling, watering and ramming in layers not exc 25cm as in soils complete all as specified and as directed.

Surface excavation n exc 30 cm deep and avaraging 15cm deep and getting out any type of soil complete all as directed.

Excavation in trenches in soft / loose soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).

Supply & Laying un-reinforced precast concrete cable cover type-1 Class IV, size of 250 mm x 150 mm x 40 mm laid dry in trenches for under groung cable protection complete all as specifed and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody ot for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping/PVC Conduit of adequate size fixed on surface with PVC rawl plugs with and including Wooden Board/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete for one light/fan/exhaust fan point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per item No. 111 here-in-before but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No. 111 here-in-before but One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 111 here-in-before but with using 2.50 Sqmm cable and 1.5sq mm earth cable PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S & F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F switch piano flush button single pole230 / 250 volts one way 5 Amps Complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F switch socket combination multi-purpose two in one, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F deluxe electronic ceiling fan regulator rotatry type, four step 120/240 Volt and connecting all as directed. Make : Anchor/Havell's/Legrand

S & F Exhaust fan ventilator DX 200mm sweep 36W ideal for mounting on glass/wooden window 220/230 Volts AC high quality plastic body and connecting up to the ceiling rose with flexible three core copper conductor of size 23/.0076 including provision to fix the ventiliar fan to the glass/wooden window/ by providing duitable fixing arrangement, farse nut, bolts etc complete all as specified and directed. Make : Ventilator DX 200mm of Havells/ Bajaj DXL 200 mm or equivalent of Crompton Greaves/Orient

Supplying, installing, commissioning and testing of evaporative type air cooler (Desert Cooler) plastic body 230 Volts single phase having capacity of 5000 Cum/Hr including standard accessories like in built float valve, masquito net and storage tank of capacity not lessthan 75 Ltrs complete all as specified and directed. Make :- Blue Star / Voltas /Havells/Usha

Supplying, installing, commissioning and testing of water cooler fully stainless steel electric driven single phase having storage capacity of 80 Ltrs (Approximately) and nominal cooling capacity 40 Ltrs per hour complete all as specified and directed. Make :- Blue Star / Voltas /Havells/Usha

S & F of elegantly industrial general purpose box type luminaire metal body, 1x16 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED tube 16 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and incl fixing arrangement of PVC square box for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed. Make :Confirming to Cat part No IGP 131 LT8-16 of crompton greaves or equivalent of Goldwyn/Wipro

Supplying & fixing lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings incl 01 No LED lamp 14/15 watt 6500 K complete all as specified and directed.

M & L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 2.5 Sqmm drawn through PVC conduit/casing capping including accessaries with 1.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and directed. Note- Two run of wire 2.5 Sqmm and one run of wire 1.5 sqmm and one run of PVC casing caping 25mm dia will be measured as one length.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 16 sqmm, 4 core laid in trenches / poles / fixed to walls etc complete all as specified and directed. (Make : Havells India Ltd / KEI / Polycab / Finolex)

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 4 way double door with IP-42 protection with Din rail and busbar Complete all as specified and directed. Make : Legrand/Havells/L & T/C&S

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-43 protection with Din rail and busbar Complete all as specified and directed. Make : Legrand Cat No. 5076 11 or equivalent of Havells/L & T/C&S

Supply & fix in repair MCB SP 230V 'C' series 6-32 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

Supply & fix in repair MCB SPN 230V 'C' series 6-40Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (The Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe.) Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

M/S S. SINGH TRADERS