CERTAIN REPAIR TO JOINERY, SANITARY FITTING, TANK AND PLUMBING ITEMS OF AGE CHARDUAR AREA UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Taking down Chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) Complete all as specified and directed.

Taking down Chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame) Complete all as specified and directed.

Taking down shutters but exc 1 Sq.m and n.exc 2 Sqm eac Complete all as specified and directed.

Taking down shutters n exc 1.00 sqm each Complete all as specified and directed.

Dismantling of steel (corrugated or semicorrugated etc) sheets any guage, thickness incl nainital or similar pattern in roof coverings Complete all as specified and directed.

Dismantling of Asbestos cement (corrugated or semicorrugated etc) sheets in roof coverings Complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails Complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position (unframed work) Complete all as specified and directed.

Dismantling of timber but in fillets, rails, posts, rafters, purlines etc.under 40 Sqcm in section Complete all as specified and directed.

S&F for second class hardwood plain,solid,straight,chowkats and frames,wrought,framed rebated on the solid ,rounded or chamfered put together with glue pinned at joints Complete all as specified and directed.

S&F 2nd class Hardwood plain framed panelled shutters 35mm thick (any number of panels) with panels of timber particale board particale board medium density wood panel both side feather edge or veneered particale board medium density wood particale board with comercial face etc complete all as specified in SSR Part-I, Section 1 Clause 8.20 (a) Complete all as specified and directed.

S&F 2nd class Hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to received glass, without (sash bars), edges of framing plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, Section 1 Clause 8.20 (a) Complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters 2nd class hard wood , open rebated and prepared to receive glass, gauge etc divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars provided with stiles and rails as specified in SSR Part I ,section 8 clause8.20(b) Complete all as specified and directed.

S&F solid PVC wood grain printed sheet of 5mm thickinclusive of solvent cement and fixing at site on PVC frame as per specification and drawing Complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing Complete all as specified and directed.

Taking down existing aluminium door shutter with frame area exc 1.50 sqm but not exc 4.00 sqm and refixing in same opening after minor repair to make the shutter fully functional and replacement the connected parts Complete all as specified and directed. Note :- Connected parts will be measured and paid seprately under relevant items

S&F Anodized aluminum frame with for doors, windows, ventilators, Partitions with one or more rebates including joining cleat for fixing etc (ISI Marked) Complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc (ISI Marked) Complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters side hung type without sash bar aluminium section weighing 0.55kg/m including necessary jointing cleats glazing clips rubberneoprene packing handle 2 nos in each door, hinges, anodized snap beading screws aluminium anodised fitting such as peg stays 150mm long ( 2 nos) suitable handle (1 No) etc (ISI Marked) complete all as specified and directed.

S&F one side obscured glass 5.5mm thick seleted quality fixed to aluminium frames and necessary rubber bedding required complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover govering pivot made of brass other part made of mild steel heavy duty (ISI Marked) complete all as specified and directed.

S&F bright finished brass 100 mm mortice latch and lock with four levers and pair of anodized (anodic coating 10 micron) as per IS-1868) aluminium lever handles with necessary screws etc (ISI Marked) complete all as specified and directed.

S&F in repair double legged door stopper of aluminium alloy 140mm cover plate tongue anodized with hard drawn steel spring fixed in floor (ISI Marked) complete all as specified and directed.

S&F in repair aluminium anodized hasp & staple safety type with mild steel hinge pin including. bolt to hinge plate fixed with screws of 100mm size (ISI Marked) complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kg (ISI Marked) complete all as specified and directed.

S&F in repair MS window handles oval type stove enamelled blackof 125mm (ISI Marked) complete all as specified and directed.

S&F in repair MS window handles oval type stove enamelled blackof 100mm (ISI Marked) complete all as specified and directed.

S&F in repair mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames (ISI Marked) complete all as specified and directed.

S&F in repair mild steel cold rolled medium weight butt hinges 75mm size fixed screws to wooden frames or with welding to steel frames (ISI Marked) complete all as specified and directed.

S&F in repair mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames S&F in repair mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames (ISI Marked) complete all as specified and directed.

S&F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm of (ISI Marked) complete all as specified and directed.

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm of (ISI Marked) complete all as specified and directed.

S&F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 200mm of (ISI Marked) complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 150mm of (ISI Marked) complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 100mm of (ISI Marked) complete all as specified and directed.

S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 200mm of (ISI Marked) complete all as specified and directed.

S&F in repair mild steel barrel tower bolts stove enameled with bright bolt length of bolt 150mm of (ISI Marked) complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type 150mm size (ISI Marked) complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type 75mm size (ISI Marked) complete all as specified and directed.

S&F in repair mild steel pressed handles oval type stove enameled black of size 125mm (ISI Marked) complete all as specified and directed.

S&F in repair mild steel pressed handles oval type stove enameled black of size 75mm (ISI Marked) complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed.

S&F in repair 2nd class hard wood beads straight (any size) for glazed gauged joinery renewed including mitres etc complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule complete all as specified and directed. Make-Prayag Polymer Pvt Ltd or its Equivalent.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed. Make-Prayag Polymer Pvt Ltd or its Equivalent.

S&F in repair 15mm bore PTMT bib taps complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. Make-Prayag Polymer Pvt Ltd or its Equivalent.

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore PTMT stop valves complete all as specified and directed.

S&F in repair gun metal globe or gate valve for 15mm bore pipe with iron wheel head, screwed both ends for iron pipe (ISI marked) complete all as specified and directed.

S&F in repair gun metal globe or gate valve for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe (ISI marked) complete all as specified and directed.

S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 15mm bore pipes complete all as specified and directed.

S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed.

S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 25mm bore pipes complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

S&F in repair swivel shower of PTMT any colour for fixing with 15mm bore pipe complete all as specified and directed.

S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

S&F in repair waste fitting brass chromium plated 40mm dia for sinks complete all as specified and directed.

S&F in repair waste fitting brass chromium plated 32mm dia suitable for stainless steel kitchen sink complete all as specified and directed.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S&F in repair 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 complete all as specified and directed.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe incl connection to out going pipe and flushing pipe complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site complete all as specified and directed.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site complete all as specified and directed.

S&F rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position complete all as specified and directed.

S&F rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed.

Disconnecting existing water tanks capacity exc 250 ltrs & n exc 500 ltrs, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc incl fittings complete all as specified and directed.

Disconnecting existing water tanks capacity exc 500 ltrs & n exc 1000 ltrs, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc incl fittings complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 (except brick) complete all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without re-moving lathing, in cement lime or cement mortar (ditto) complete all as specified and directed.

M&L for rendering 10 mm thick plastering but on one side of lathing in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick plastering but on other side of lathing floating/setting coat using water proofing compound over it in CM 1: 4 complete all as specified and directed.

M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding , joists, etc. In walls, ceilings, stanchions, beams, bird proofing etc. Including all laps ,cutting and waste complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 finished even & smooth without using extra cement in patches including taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) using water proofing compound @ 3% of the total weight of cement or as per manufacturer's instruction complete all as specified and directed. Note-WPC will be measured and paid seperately under the relevant item.

M&L for rendering 15 mm thick plastering but as in CM 1:4 on fair faces of brick work using water proofing compound @ 3% of the total weight of cement or as per manufacturer's instruction complete all as specified and directed. Note-WPC will be measured and paid seperately under the relevant item.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for second class wrought hard wood in scantlings (Timber fixed) complete all as specified and directed.

M&L for 50mm thick planed at both sides boarding as in rafters,truess and members complete all as specified and directed.

M&L for 50mm thick clean sawn as in joist of ceiling complete all as specified and directed

M&L for 20mm thick second class hardwood planed at both sides boarding as in eaves boards complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

M&L 4mm thick asbestos cement plain building boards, fixed to timber framework in ceiling/wall / sunsheds with screws/ nailing complete all as specified and directed.

S&F Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross Tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM and 23.5mm x 26.4mm x1.40mm weighing 0.191Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminium angle bracket of size 15mm x 15mm x 1.5mm weighing 0.12Kg /RM fixed with suitable MS bolts, nuts and washer. The snap grid (main /cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 35mm x 25mm x 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement complete complete all as specified and directed.

M&L for 12mm pre-laminated particle board, interior grade, prelaminated one side with decorative choice laminated & other side balancing white laminated, fixed with screws to timber/steel frame work complete all as specified and directed.

S&F in repairs of Gypsum board of Armstrong make or equivalent board of size 600x600mm complete all as specified and directed.

M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc13 sq.cm & n exc 25 sq.cm) complete all as specified and directed.

M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc6 sq.cm & n exc 13 sqcm) complete all as specified and directed.

M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,wrought ,secured with nails or brads but (sectional area exc 3 Sqcm &n exc 6 sqcm) complete all as specified and directed.

M&L for preparation of surfaces of new wood and wood based materials,of any description , not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of surfaces of new wood and wood based materials,of any description , not otherwise described,not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of surfaces of old wood and wood based materials of any description , not otherwise described, over 10 cm width or girth, and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of redoxide complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of putty complete all as specified and directed.

M&L including complete removal of existing treatment, preparation of old Plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of wall care putty complete all as specified and directed.

M&L including complete removal of existing treatment, preparation of old Plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of new or old surface of wood and wood based materials of any description and girth not otherwise described and applying two coats of creosote oil complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2,1:3:6(using 40mm graded crushed stone aggregate) as in plinth protection ,footpath and making finished even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete type-C2 1:3:6 (using 40mm graded crushed stone aggregate) in surface channel and drains complete all as specified and directed.

M&L extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed.

S&F 1mm thick mild steel sheet eaves gutters 150mm dia, galvanised class 3, half round woth rounded edges complete all as specified and directed.

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 25 mm thick for Cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces for backing of tiles/ any skirting material complete all as specified and directed.

S&F Non Skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors incl 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed complete all as specified and directed.

S&F Glazed earthenware tiles 300mmx200mm x 6 to 7 mm thick, on vertical surfaces of walls like skirting or dado etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed complete all as specified and directed.

S&F Non Skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm,in floors incl 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed complete all as specified and directed.

S&F Non Skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm,in vertical surfaces like skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) complete all as specified and directed.

S&F Non Skid ceramic joint free coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors incl 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed complete all as specified and directed.

S&F Non Skid ceramic joint free coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in vertical surfaces like skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) complete all as specified and directed.

S&F Vitrified ceramic tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc incl 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Vitrified ceramic tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces like skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) complete all as specified and directed.

S&F 16 to 18mm thick Granite (of any type) slab of approved shade as in flooring, platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) over & including 15mm thick screed bed (bedding layer) in CM 1:6 complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M/S L N ENTERPRISE

M/s Brahamaputra Wood Industries

KAILSON

M/S LAKSHMI ENTERPRISES

M/S Manjit Singh

SRI JAINATH SINGH