CERTAIN B/R REPAIRS TO MISC WORK UNDER AGE B/R-II AND REPAIR AND REPLACEMENT OF INTERNAL WIRING AND CONNECTED ITEMS UNDER AOR OF AGE B/R GANDHIDHAM UNDER GE (ARMY) BHUJ

Amount

M&L for glazed ceramic tiles, coloured tiles, 450mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles square / rectangular area of each tile 300mmx300mm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.14 sqm but not exc 0.36 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as above item no. 3.00 but in vertical surfaces etc. over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

M & L for rendering 5 mm thick in C M 1:3 on ceiling finished even and smooth without using extra cement and applying 3 coats of white wash on ceiling surfaces after preparation of the newly plastered surfaces of ceiling complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement including preparation of newly plastered sufaces of walls & applying two coat of distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size not exceeding 1.50 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size exceeding 1.50 sqm but not exceeding 4 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down shutters of any description and in any position of size exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed.

M & L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. in brick walls and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S & F anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) of thickness not less than 1.30mm and , 3 track sliding shutters wt not less than .55 kg/RM duly fitted with neoprene beading, glazing clips, shutters with tinted glass 3.8mm thick and stainless steel wire cloth 0.35mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

M &L mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified.

S & F 35 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated.

S & F 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F aluminum alloy handles 150 mm size cast type anodized complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F in repair Double action spring hinges brass, with phosphor bronze wire spring, bright polished 125mm, complete

S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S & F butt hinges 125 mm long extruded aluminium alloy with stainless steel hinge pin, anodised and fixed type B-22 complete all as specified and directed.

S & F butt hinges 125 mm long mild steel medium weight cold rolled complete all as specified and directed.

S & F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repair sinks matt finish anti scratch stainless steel without drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

M & L Granite slab work 18 to 20 mm thick in cooking platforms and like over 15mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting recess opening for the sink portion and embedding if required, complete all as specified and directed.

al as above item no.36.00 but in skirting/dado and like over 10mm thick cement mortar 1:4 including pointing in white cement (1:2) complete all as specified and directed.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar works complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in sub base and finishing top surface even and fair complete all as specified and directed.

S & F 60 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-35 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc and S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding dorrs; fixed with angle cleats or other connecting plates conf to Fe-410-W(Gde-E-250) quality-B quality A complete all as specified and directed.

Dismantling plain or corrugated A C or steel sheeting any guage, of any description and in any position as in roof coverings and S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with L or J hooks complete all as specified and directed.

S&F of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete all as specified and as directed.

S & F in repair tubular towel rail of aluminium anodised , 20 mm dia, D type, 60 CM long between flanges complete all as specified and directed.

S & F in repair Bib taps cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15 mm bore of GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair Stop valves concealed type, fancy type chromium plated ISI marked cast copper alloy screwed down high pressure for 15 mm bore of GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

S & F in repairs 15mm dia angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.

M & L for Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M & L for Preparation of new painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old decorated surface by complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean and applying1mm thick putty allround and preparation of surface for further treatment and applying two coat of distemper oil emulsion paint white or tinted complete all as specified and directed.

M & L for Preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

S&F of 20 mm dia stainless steel curtain rod along with necessary brackets/supports as approved by Engr-in-Charge.

S&F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specifed and directed by the Engr-in-Charge

S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M & L kota stone work 20 mm thick in floors steps, cooking platforms and like over 15mm thick cement mortar 1:6 pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

All as above item No. 76.00 but in skirting/dado and like over 10mm thick cement mortar 1:4 including pointing in white cement (1:2) complete all as specified and directed.

S&F in repair Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L Point wiring for one light/fan point controlled by one modular switch, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/ fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing surfaces complete all as specified and as directed

All as per Sl item No 2 above but for one socket outlet point 5 amps on independent board controlled by one, one way switch.

All as per Sl item No 2 above but for one socket outlet point 5 amps on the same baord with other switches.

M & L Point wiring for 15 amps socket point controlled by one modular switch, one way switch by using 2.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/ fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing surfaces complete all as specified and as directed

M & L Sub main wiring (concealed type ) with two single core 4 Sqmm FRLS PVC insulated and unsheathed 1100 volts grade cables with stranded copper conductor cable drawn through in and including casing capping one single core 2.5 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dully complete and making good the disturbed surface in and including taking down old unservicable sub main wiring , complete all as specified and directed by Engineer-in-Charge. Note : (i) 2 run of 4 Sqmm ,1 run of PVC casing capping & 1 run of 2.5 Sqmm cable will be measured as single run. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and paid separetly the rate quoted by contractor per unit shall be deemed of this item.

S & F Modular switch 1 way 6A, 1 module of sigle pole ,5/6 Amps, one way ,complete all as specified and as directed

S&F Modular switch 1 way 15A, 1 module of single pole, 15 Amps, one way ,complete all as specified and as directed

S&F Modular switch socket outlet 3 pin 5 Amp' flush type controlled by one switch , complete all as specified and directed

S&F Modular switch socket outlet 3 pin, 15Amp, flush type, complete all as specified and as directed

S & F Ceiling rose, Pilot 3 Plate ceiling rose 6A ,complete all as specified and as directed

S&F Madular Fan step regulator, 120W complete all as specified and as directed

S&F LED bulb 14 watt all as specified and directed

Supply & fixing Gate light LED-40 WATT 215 V, 50 HZ, post top made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP65 protection fix with GI Pipe 40 mm dia 30 cm long (15 cm under the pillar & 15 cm above the pillar ) with proper connecting with existing electric cable in and ilcuding taking out old unservicable light , complete all as specified and directed

Supply & Fixing LED street/bldg light fitting luminaire 70 Watt IP65, 230 volts, new generation energy saving & enviormental friendly long life versatile pressure die cast aluminium roadway luminarie with high power LEDs as light source and electronic driver alongwith suitable bracket required as per site for fixing the light complete all as specified & directed

Supply and fixing in repair LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fittings complete all as specified and directed

Supply & fix in repair MCB TPN capacity 16-32 Amps, 415V, 50 c/s 16 KA, complete all as specified and directed

Supply & fix in repair MCB TPN capacity 40-100 Amps, 415V, 50 c/s 16 KA, complete all as specified and directed

Supply & fix in repair MCB SPN capacity 32 amp, 'C' series , complete all as specified and directed

S &F MCB SP 6 to 32 Amps, 240 Volts of 'B' series to be housed in DBs and suitable size cable lugs to be fixed with MCBs as in replacment, complete all as specified and directed

S & F in repairs MCCB 100 Amps, 415 volts AC 50Hz, 3 pole, bracking capacity 16 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

S & F in repair MCCB 160 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

S & F in repair MCCB 200 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

S & F in repair MCCB 400 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

S&F distribution box epoxy powder coated ,SPN 8 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed

S&F distribution box epoxy powder coated ,SPN 4 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed

S&F in repair PVC insulated & sheathed , heavy duty electric cable on RCC Piller /Dome with Copper conductor, multi stranded 1100 volts grade,3 core, 2.5 Sqmm and taking out of existing unserviceable cable complete all as specified and directed

machine vision plus