REPAIRS AND RESURFACING OF EXISTING ROAD AND FURNITURE ITEMS AT VARIOUS LOCATION CENTRAL AREAS UNDER AGE B/R-II AT MILITARY STATION BHUJ AND KHAVDA

Material and labour for preparing existing black top surfaces by wire brushing for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with paving bituminous primer at @ 2.5 Kg per 10 sqm all as specified and directed by Engineer-in-Charge.

Material and labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm all as per specified and directed by Engr-in-Charge.

Material and labour for preparing WMM surfaces by wire brushing for removing caked mud etc , sweeping with brooms and finally fanning cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer at 7.50 Kg/ 10 Sqm all as per specified and as directed by Engr-in-Charge.

Material and labour for bituminous premix macadam not exceedign 75mm consolidated/ compacted thickness using Hot Mix Plant & Mechanical Paver with 4% binder (paving grade bitumen any penetration) content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed.

Material and labour for bituminious premix semi dense asphaltic concrete,30 mm consolidated/ compacted thickness using Hot plant and machenical paver with 5.5% (paving bitumen VG 30 Gde) binder content by weight to total mix, rolled and compacted using 8-10 tone power road roller to require camber and gradient complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparing bituminous surfaces of road and marking 1.5-2 mm thick centre lines, stop lines, dashes,arrows etc. and the like exec 10 cm on roads pavements with hot applies thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

Taking down solar cat eye/ cat eye solar reflective in any position fixed in road complete all as specified and directed by Engr-in-Charge.

Taking down speed breaker in any position fixed in road complete all as specified and directed by Engr-in-charge.

Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 Watt, one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of six super bright LED with 10,000 mcd to 18,000 mcd completed as per manufacturers instructions etc. all as specified and directed with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model Number DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fixing of speed breaker made of ABS material with two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed to on to the speed breaker of size 750mm x 75mm x 250mm including surface to be make level as parential surfaces including dismantling/ taking out of any type rusted/ broken speed breaker complete all as specified and as directed by Engr-in-Charge.

Dismantlin of precast concrete articles like kerb stone built in cement mortar complete all as specified and directed by Engr-in-charge.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25grade cement conrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand),including making joints with or without grooves (thickness of joints except at sharp curve shall not to be more than 5 mm ), including making drainage opening wherever required complete size and shape as approved by Engr-in-charge.

Material and labour for preparing of new concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and directed.

Material and labour for preparation of old painted concrete surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified and directed.