Construction of Turkatisaur (SVS) water supply scheme including supply installation and Testing of Rising main, Distribution System, FHTC work, construction of OHT and all appurtenance work etc complete under JJM

Rates for Construction of Turkatisaur (SVS) water supply scheme including supply installation & Testing of Rising main, Distribution System, FHTC work, construction of OHT & all appurtenance work etc complete under JJM.

Distribution System

Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal. (9845 X 0.60 X 1.00)

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road (0.60m x 816 m length)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) C.C. Road (1833.00x0.60x0.15 )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing, Lowering into trenches with true to alignment, Laying & Jointing including specials of full lengths of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. PE 100 PN-8 63mm

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing & Fixing Woltman type Bulk water meter Inline Type, flange end with integral mounted display and all necessary fittings etc. complete 125mm dia

150mm dia

Fire Hydrant Valve Confirming to IS: 5290 (Flanged) in position including all material, labour, T&P etc. comp.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and making House service connection from water supply distribution pipe line etc. complete

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of following G.I. Pipes , Jointing by electric welding process with proper grade of electrodes suitable for jointing of water supply pipe lines (Adore, L&T or equivalent quality of electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. (256x8.00=2048.00Mtr.) 15mm dia

100mm dia

150mm dia

Rising Main

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of following Rising Main Pipe, Jointing by electric welding process with proper grade of electrodes suitable for jointing of water supply pipe lines (Adore, L&T or equivalent quality of electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. MSERW Yst 210 grade Pipes 100 mm dia, 4.8 mm thick (Tubewell to OHT)

Pump house, staff quarter and Boundary Wall

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing PTMT bib cock of approved quality 15 mm nominial bore

Providing and fixing c. p. brass stop cock of approved quality

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20mm nominal bore )

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 470x420 mm bowl depth 178 mm

Supply and fixing polyvinyl chloride pipe 90 mm dia including fitting all for complete.

Supply and fixing polyvinyl chloride pipe 110 mm dia including fitting all for complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet, and overflow pipes but without fitting and the base support for tank.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

Supplying and flxing suitable size GI box with modular plae and cover in front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings

Supplying and flxing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet coveron the fan box etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supply & Fixing of ceiling fans 1200 mm

Supply & Fixing of Exhaust fan

Supply & Fixing of florocent tube lights 1200 mm

Supply & Fixing of LED Bulb 9watt

Supply & Fixing of LED street light 50 watt

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12mm diameter holes and plugging with cement mortar 1 :2(1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying damp proof course 50 mm thick with cement, sand and 20mm nominal size of aggregate in the proportion of 1:2:4 with Damp Proof Coarse as directed by manufacturer.

Centering and shuttering including strutting, ropping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform.

Providing and laying in position cement concrete of specific grade (1:3:6) with cement, coarse sand and 40 mm nominal size stone aggregate as base concrete for flooring complete.

40 mm thick Cement concrete flooring 1:2:4 with cement, coares sand and 20 mm nominal size stone aggregate finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps etc. complete.

Providing wood work in frame of doors, windows, clerestory windows and other frames, wrought framed and fixed in position of sal wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled MS butt hinges with necessary screws excluding panelling which will be paid for separately. 30 mm thick sheesham wood shutter

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm dia. bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm with 1:3:6 mix of cement, coarse sand and 20 mm nominal size aggregate.

Providing and fixing M.S.Grills of required pattern in frames fixied to oponing/wooden frames of windows with rawl plug screws etc.

Providing and fixing ISI marked oxidrsed M.S. pressed butt hinges with necessary screws/nut bolts etc. Door size 125x65s2.12 mm

Window size 100x58s1.90 mm

Providing and fixing ISI marked oxidrsed M.S. sliding door bolts with necessary screws/nut bolts etc. 300x16 mm

Providing and fixing ISI marked oxidrsed M.S.tower bolts with necessary screws/nut bolts etc. Door size 150x10 mm

Window size 100x10 mm

Providing and fixing ISI marked oxidised M.S. handles size 125 mm conforming to IS.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manfacture on wood work (Hard and soft wood)

Painting wood and steel work with Deluxe multi surface paint of required shade. Two or more coat applied @0.90 lt /10sqm over an under coat of primer @0.75 lt/10sqm of approved brand ro manufacture.

Supply of RS Joist (ISLB 300) 300 mm X 150mm & 9.40 mm thick size & 4.00 m long and fixing with 1:2:4 PCC over columns in positions. (wt. of ISLB 300 @37.70 kg/m)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group B Long Discrpition)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVCinsulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

(OHT capacity - 80 KL, Staging - 18m)

Supply of all Materials , Labours ,T&P etc. and Construction of RCC O.H.T of following capacities (In Kiloliters) and 12m. Staging with 1.00m wide RCC staircase from G.L. to balcony and from balcony to Top Dome 1m x 1m RCC landing at suitable locations and railed with 3 rows of 20mm dia. G.I. (M) pipe on 65x65x5mm angle iron posts fixed with ladder, top to the floor inside of the tank. M.S. M.H. cover with loacking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S M.H. cover , ventilator column etc. Complete with approved water proofing ( apex)/ enamal paint, testing, filling water for testing purpose etc. including supply of verticle pipes and specials assuming bearing capacity as 8MT/M2 staging 12.00 meter.

Additional rates for staging per meter height beyond 12 m height including cost of all material, labour, shuttering, scaffolding T&P complete for following capacity (In Kiloliters) Over Head Tanks. 6M Staging

Electrical & Mechanical

Supply of Submersible pump & motor set of 300LPM, discharge at 60Mt. Head

S/o Submersible copper cable size 1x3x16 sq.mm.

100mm dia. C.I. D/F Non Return Valves conforming to IS: 14846-2000 (kirloskar or equivalent)

Supply and fixing of Rubber Packing including all labour and T&P complete in all respect . (Jal Nigam 12.01) 100mm. dia size

Supply and fixing of Nut-bolts different sizes including all labour and T&P complete in all respect .

Supply and fixing of main piping and valves of 150mm size having following items. Supply and fixing of 100mm dia x 5.6mm thick flanged column pipe in 3m length with inter-locking arrangement

Supply and fixing of 100x100x100mm dia C I flanged Tee

Supply and fixing of 100mm dia CI D\F bend

Supply and fixing of 100mm dia MS D\F pipe of 1.5M length

Supply and fixing of MS clamp 100 mm dia.

Supply and fixing of MS Flanged 16mm thick 100 mm dia.

S/o Pressure gauge with fitting.

S/o Chain pulley block of 3.0Tonne capacity 4 Mt. lift spire gear tested on 4.5Ton load.

S/o Chemical earthing material for plant including earth electrode, aluminium earth strip etc as per I.E. rules.

Supply & fixing of H.R.C main switch 3pole with neutral link in 100amp. 440voltage A.C.

S/o Rubber Insulation sheet 1Mt.x2 Mt.x .025Mt.

Supply of Special tools and spanners with 2 Nos. chain wrench.

Installation, Commissioning & Testing of pumping plant and all accessories.

Supply and fixing of Electric type of dosing system complete with solenoid ciol actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220 Volt single phase A.C. Supply along with chemical injection device and 100 Ltrs capacity of media tank complete with accessories.

Supply & installation of electronic automatic voltage stabilizer with complete feature asper requirement, capacity: 25KVA Voltage range 280V-460V/ 240V

Supply, installation, Testing and Commissioning (SITC) on turnkey basis for fully automatic pump automation control panels of different capacities having intelligent unit having "FIELD PROGRAMMABLE LOGIC CONTROLLERS based, SCADA operated pump motor start, Run, control, Protect against faults automatically operated control & management system" for supervisory control and data acquisition system at pumping water supply schemes & two years free of cost A.M.C. for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing including cartage from works of manufacturer upto site of work:-40HP

Transporation of heavy duty drilling machine with all T & P and plant upto the site l.e.

Erection & Levelling of rig machine at site of work

Drilling of bore upto 150 mtr.depth below ground level in a all type of solt/ underground condition with DC/RC Rig machine or suitable.method suitable to discharge as desired with disired bore dia as per instructionof Engineer-in charge.

Procurement of TW assembly as below 300 mm dia MSERW plain pipe 7.90mm thick Blind & Threded

300 dia MSERW .Slotted pipe 7.90mm thick.

300mm dia Bail Plug

300mm dia M S well cap

300mm dia M S clamp with nuts & bolts

Supply of pea gravel of size 1.6mm to 4.8mm

Srrounding of pea gravel in between bore and tube well assembly upto entire depth of tube well ordered by the department

Prepairing & Lowering of tube well assembly starting from G.L. to the required depth including cutting, welding as reqired at site complete with all T& P required Fixing of 300mm dia bail plug with nut&bolt

Lowering of 300mm dia MSERW housing pipe (Plain & Slotted pipe) as required

Fixing of 300mm dia, 8mm thick tube well cap

Fixing of 300mm dia, M.S.D.I housing clamp.

Dismantling of rig machine & clerance of site after satisfactory completion of work

Development of tubewell by Air Compressor 1400/ 1100 CFM 350/ 250PSI

Development of tubewell by the suitable sumbersible 0.P. Unit including Supply and installation of over pumping unit to get the Sand free discharge.

Sign and display board

GM INFRASTRUCTURES

M/S Guru contractor